33KV HT Line and 500 KVA Transformer Substation Work at Budha Bandh WTP under municipal council chhatarpur

H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER

33 KV 'V' CROSS ARM 1.5 MTR (5FT)- CENTRE MADE FROM 75X75X6MM ANGLE

BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT

33 KV TOP CLAMPS 75X75X6MM ANGLE TYPE

EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE

33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR

AAAC DOG CONDUCTOR 0.10 SQ. INCH (100 SQ.MM. AL.EQ.)

JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR

STAY SET 20 MM COMPLETE

H.BEAM CLAMPS 65X8MM FLAT

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

BACK FILLING OF POLES WITH BOULDERS

CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING + MUFFING)

CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)

RED-OXIDE PAINT

ALUMINUM PAINT

ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)

DANGER BOARD ENAMELED 33 KV

ALUMINIUM BINDING WIRE AND TAPE

M S BOLT WITH NUT 16X250 MM

H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER

DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL

H.BEAM CLAMPS 65X8MM FLAT

33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR

33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS

33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR

BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM

STAY SET 20 MM COMPLETE

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING + MUFFING)

CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)

EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE

RED-OXIDE PAINT

ALUMINUM PAINT

ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)

DANGER BOARD ENAMELED 33 KV

M S BOLT WITH NUT 16X250 MM

M S BOLT WITH NUT 16X140 MM

M S BOLT WITH NUT 16X90 MM

M S BOLT WITH NUT 16X40 MM

H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER

DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL

H.BEAM CLAMPS 65X8MM FLAT

33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR

33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS

BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM

STAY SET 20 MM COMPLETE

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING + MUFFING)

CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)

EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE

RED-OXIDE PAINT

ALUMINUM PAINT

ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)

DANGER BOARD ENAMELED 33

M S BOLT WITH NUT 16X200 MM

M S BOLT WITH NUT 16X165 MM

M S BOLT WITH NUT 16X140 MM

M S BOLT WITH NUT 16X90 MM

M S BOLT WITH NUT 16X40 MM

33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR

H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER

33 KV SUSPENSION CLAMPS WITH ATTACHMENT FOR A.B CABLE

EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE

33 KV ARIAL BUNCH CABLE 95 SQMM

STRAIGHT THROUGH HEAT SHRINKABLE CABLE JOINTING KIT WITH LUGS FOR 33 KV GRADE XLPE CABLE FOR 3 CORE 95 SQ MM

OUTDOOR HEAT SHRINKABLE CABLE JOINTING KIT WITH LUGS FOR 33 KV GRADE XLPE CABLE FOR 3 CORE 95 SQ MM

STAY SET 20 MM COMPLETE

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING + MUFFING)

CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)

RED-OXIDE PAINT

ALUMINUM PAINT

ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)

DANGER BOARD ENAMELED 33 KV

M S BOLT WITH NUT 16X90 MM

M S BOLT WITH NUT 16X40 MM

M S BOLT WITH NUT 12X140 MM

H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER

33 KV BRIDLING CROSS ARMS 75X75X6MM

BACK CLAMP FOR H BEAM POLE OF 75X75X6 MM MS FLAT

33 KV TOP CLAMPS BRIDLING TYPE 75X75X6 MM

EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE

33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR

AAAC DOG CONDUCTOR 0.10 SQ. INCH (100 SQ.MM. AL.EQ.)

33 KV GUARDING CHANNEL 75X40X6 MM

JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR

STAY SET 20 MM COMPLETE

H.BEAM CLAMPS 65X8MM FLAT

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

G.I. WIRES 5.0 MM. (6 SWG)

G.I. WIRES 4.0 MM. (8 SWG)

CONCRETING (1:3:6) OF H-BEAM @ 0.65 CMT.PER POLE (BASE PEDDING + MUFFING)

CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)

RED-OXIDE PAINT

ALUMINUM PAINT

ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)

DANGER BOARD ENAMELED 33 KV

ALUMINIUM BINDING WIRE AND TAPE

M S BOLT WITH NUT 16X200 MM

M S BOLT WITH NUT 16X90 MM

STAY EYE BOLT 20 MM DIA

33 KV VCB SCADA COMPATIBILITY WITH CTS.HAVING RATIO 300-150/5 WITH 0.5 CLASS ACCURACY

33 KV CONTROL & RELAY PANEL WITH NUMERICAL STATIC RELAY FOR TRANSFORMER PROTECTION

SCADA COMATIBILITY (MFT,NUMERICAL RELAY COMMUNICATED WITH SCADA CENTRE,MASTER RELAY (ELECTRICAL/MANUAL)

FOUNDATION OF 33 KV BREAKER (1:3:6)

COPPER CONTROL CABLE 4 CORE, 2.5 SQMM PVC UNARMOURED

COPPER CONTROL CABLE 8 CORE, 2.5 SQMM PVC UNARMORED

TERMINAL CLAMPS

T-CLAMP FOR JUMPER CONNECTION WITH A. B.SWITCHES & DO FUSES

LEAD ACID BATTERY SET 30 VOLTS 100 AH

BATTERY CHARGER 230 V AC INPUT 10 AMP, 30 V DC OUTPUT SOLID STATE TYPE

Transformers,33/0.4 KV 3 Phase Supplying, installing, testing and commissioning of 33/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side, hand operated off load Tap changer switch above 100 KVA, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil conservator with drain plug, oil filling hole with plug, dehydrating silica gel breather on eye level, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification. Energy efficiency level -3 Copper wound 500 KVA (SOR MPPWD ELECTRICAL2020- Item No.-42.70.2.4)

Vacuum circuit breaker Supplying, installation, testing and commissioning of triple pole outdoor type 11KV/33KV vacuum circuit breaker with outdoor control & relay panel with numerical static relay for feeder protection (1F). The installation of VCB shall be carried out in accordance with IS: 3072. The VCB shall be mounted on suitable size duly painted MS channel/angle iron structure with nut bolts and washer. The structure shall be fixed on existing cement concrete foundation. The complete work should be done as per IS specification. 33 KV, 1250A VCB (MPPWD SOR 42.124.2)

Construction of pedestal (plinth) for transformer Designing and construction of pedestal (plinth) for transformer of desired size including excavation in hard rock/soft rock, base concrete M-7.5 (1:4:8), 20mm metal and pedestal of RCC M-15 (1:2:4) including required tar steel reinforcement for required height as per IE rules from base concrete including shuttering and finishing with 10mm thick plaster in cement mortar 1:3 curing & white washing etc. complete as per specifications. (MPPWD SOR 42.87)

Fencing of chain link mesh 100x100 mm, 12 SWG GI wire Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required with angle iron/ flat iron members/cross members including mesh fix on frame and erected between the post. The angle iron post shall be erected in cement concrete M15 (1:2:4) (20 mm graded metal) foundation, cement concrete, excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.(MPPWD SOR 42.75)

800A, Drawout 50kA 800Amp, manual, drawout 50kA (MPPWD SOR 27.7.7)

33KV-"SUPPLYING INSTALLING AND TESTING OF AB ISOLATING SWITCH ASSEMBLY SET GANG OPERATED SUITABLE FOR 11/0.4 KV, DP STRUCTURE WITH B RASS PART CONTACTS, OPERATING ROD WITH REQUIRED GI PIPE, HANDLE LOCKING ARRANGEMENT ON ON-OFF POSITION CONFORMING TO IS COMPLETE WIT H REQUIRED MATERIAL AND INSTALLING ON EXISTING STRUCTURE TO COMPLETE THE JOB AS REQUIRED AS PER SPECIFICATION. 33KV"

33KV-"SUPPLYING, INSTALLING ,TESTING OF 11 KV D.O. FUSE ASSEMBLY WITH BRASS PART CONTACT FOR 11/0.4 KV DP STRUCTURE SET OF 3 WITH FU SE WITH BARREL WITH REQUIRED FUSE ELEMENT & OTHER MATERIALS AS PER SPECIFICATION ON EXISTING D.P. STRUCTURE AS REQUIRED.(SET OF 3NOS .) 33KV"

(III) 33 KV GAPLESS STATIONTYPE-"SUPPLYING, INSTALLING, TESTING AND COMMISSIONING OF LIGHTNING ARRESTORS"

"SUPPLYING AND ERECTION OF 33KV PIN INSULATOR COMPLETE WITH LARGE STEEL HEAD G.I. PIN, NUT, WASHER ETC. AS REQUIRED"

"SUPPLYING AND ERECTION OF SINGLE PIECE NON-LINEAR RESISTOR TYPE LIGHTNING ARRESTOR FOR 3 WIRE, 33KV OVERHEAD LINES WITH RATED VOLTA GE OF 30KV (RMS) WITH A NOMINAL DISCHARGE CURRENT RATING OF 5 KA AND COMPLETE WITH GALVANISED CLAMPING ARRANGEMENT, G.I. BOLTS, NUTS , WASHER ETC. AS REQUIRED."

"EARTHING WITH COPPER EARTH PLATE 600MM X 600MM X 3MM THICK INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSER IN CEMENT MORTOR, COVER PLATE HAVING LOCKING ARRANGMENT ON THE TOP AND G.I. WATERING PIPE 20MM DIA 2.7 METER LONG ETC. (BUT WITHOUT CHARCOAL OR COKE A ND SALT) COMPLETE AS REQUIRED."

"ADD EXTRA FOR USING SALT AND CHARCOAL / COKE FOR G.I. PLATE OR COPPER PLATE EARTH ELECTRODE AS REQUIRED INCLUDING EXCAVATION & REFI LLING."

"SUPPLYING AND LAYING 25MM X 5MM G.I. STRIP AT 0.5 METER BELOW GROUND LEVEL AS STRIP EARTH ELECTRODE INCLUDING SOLDERING ETC. AS REQ UIRED."

"B. 3X70,95 HEAT SHR.JOINTG. KIT 33 KV XLPE CABLE O.D. TERMINATION"-"PROVIDING & MAKING CABLE END TERMINATION WITH HEAT SHRINKABLE J OINTING KIT COMPLETE WITH ALL ACCESORIES INCLUDING LUGS SUITABLE FOR 33 KV/11 KV 3 CORE XLPE ALUM. CONDUCTOR CABLE AS REQUIRED AS PE R SPECIFICATION ANDAS PER ACCEPTED STANDARD COMPLETE. HEAT SHR.JOINTG. KIT 33 KV XLPE CABLE O.D. TERMINATION"

300 SQ.MM.(XLPE) ARMOURED 3½ CORE-"SUPPLY OF XLPE INSULATED POWER CABLE (CONFORMING IS-7098 ) 1100 VOLT GRADE/HEAVY DUTY POWER CABLE CONFORMING TO IS 1554-1100 VOLTS GRADE , 2 CORE /3½ CORE/4 COREISI MARKED WITH ALU. STRANDED /SOLID CONDUCTOR. ARMOURED 3½ CORE"

LUGS:- Supplying and fixing cramping type Alum. lugs as per I.S.S. Specification suitable for follo wing size of cable with Alu. /Copper solid/stranded conductor evently cramped with high/pressure too l and connected to switch gear/Bus/M.C.C.B./ M.C.B. etc.

LUGS:- 300 SQ.MM.-"SUPPLYING AND FIXING CRAMPING TYPE ALUM. LUGS AS PER I.S.S. SPECIFICATION SUITABLE FOR FOLLOWING SIZE OF CABLE WI TH ALU. /COPPER SOLID/STRANDED CONDUCTOR EVENTLY CRAMPED WITH HIGH/PRESSURE TOOL AND CONNECTED TO SWITCH GEAR/BUS/M.C.C.B./ M.C.B. E TC. AS REQUIRED COMPLETE. LUGS:- FOR CONDUCTOR SIZE- "

LED LAMPS-SUPPLYING AND FIXING OF LT PANEL ACCESSARIES OF APPROVED MAKE IN EXISTING LT PANEL INCLUDING CONNECTIONS ETC.AS REQUIRED A S PER SPECECIFICATION

ALUMINIUM BUS BAR STRIPS WITH PVC SLEEVES-SUPPLYING AND FIXING OF LT PANEL ACCESSARIES OF APPROVED MAKE IN EXISTING LT PANEL INCLUDI NG CONNECTIONS ETC.AS REQUIRED AS PER SPECECIFICATION

CURRENT RATING -500/630 AMPS & ADJUSTABLE: 70% -100% THERMAL & 4-10 TIMES MAGNETIC SETTING-"SUPPLYING OF ISI MARKED AND APPROVED MAK E OF MOULDED CASE CIRCUIT BREAKER (MCCB) SUITABLE FOR 3 PHASE,3 POLE, 50 HZ, 415 VOLTS, AC SUPPLY WITH RESPECTIVE INTERRUPTING CAPAC ITY (KA) AT 415 VOLTS CITED AGAINST THEIR RANGE STANDARD CONFORMING TO IS - 8828 MCCB WITH BREAKING CAPACITY 35 KA AT 415 V"

"H-BEAM 152X152MM , STD WEIGHT 37.1 KG PER METER"-"SUPPLY OF SUPPORT FOR OVERHEAD LINE RS JOIST / H-BEAM OF I.S. STANDARD INCLUDING WELDING, DRILLING OF REQUIRED HOLE ETC. COMPLETE AS REQUIRED.H-BEAM 152X152MM , STD WEIGHT 37.1 KG PER METER"

"SUPPLYING OF ANGLE/CHANNEL FLAT IRON FITTING FOR OVERHEAD LINES SUCH AS CROSS ARMS, CLAMPS, BRACKETS, WELDING AND OTHER NECESSARYM ATERIALS AS PER SPECIFICATIONS."

(II) M.S. NUTS AND BOLTS-"SUPPLYING, INSTALLING, OR STAY WIRES (II) M.S. NUTS AND BOLTS"

95 SQ.MM. XLPE CABLE 33 KV GRADE-"SUPPLY OF APPROVED HIGHTENSION XLPE CABLE 11KVGRADE AS PER ISI STANDARD 3 CORE ARMOURED WITH ALU. SOLID/STRANDED CONDUCTOR ISI MARKED AS REQUIRED XLPE CABLE 11 KV GRADE"

CURRENT RATING -200 AMPS & ADJUSTABLE: 70% -100% THERMAL & 5-10 TIMES MAGNETIC SETTING-"SUPPLYING OF ISI MARKED AND APPROVED MAKE OF MOULDED CASE CIRCUIT BREAKER (MCCB) SUITABLE FOR 3 PHASE,3 POLE, 50 HZ, 415 VOLTS, AC SUPPLY WITH RESPECTIVE INTERRUPTING CAPACITY (KA) AT 415 VOLTS CITED AGAINST THEIR RANGE STANDARD CONFORMING TO IS - 8828 MCCB WITH BREAKING CAPACITY 35 KA AT 415 V"

COPPER BUS BAR STRIPS WITH PVC SLEEVES-SUPPLYING AND FIXING OF LT PANEL ACCESSARIES OF APPROVED MAKE IN EXISTING LT PANEL INCLUDING CONNECTIONS ETC.AS REQUIRED AS PER SPECECIFICATION

"ERECTION OF STEEL TUBULAR OR STEEL RAIL POLE OR H-BEAM OF LENGTH EXCEEDING 10 METERS BUT NOT EXCEEDING 13 METERS IN CEMENT CONCRETE 1:3:6 (1 CEMENT :3 COARSE SAND: 6 GRADED STONE AGGREGATE 40MM NOMINAL SIZE) FOUNDATION , BASE PADDING & MUFFING INCLUDING EXCAVATIO N AND REFILLING ETC. AS REQUIRED.(4.55 BAGS OF CEMENT/CMT.)"

"SUPPLYING AND ERECTION OF A SET OF THREE 11KV DISC INSULATORS FOR 33KV OVERHEAD LINES WITH GALVANISED INSULATOR FITTINGS, BALL AND SOCKET TYPE, AND COMPLETE WITH GALVANISED STRAIN CLAMP, BOLTS, NUTS, WASHERS ETC. AS REQUIRED."

LARGE SIZE-SUPPLYING AND FIXING AS PER SPECIFICATION CAUTION / DANGER BOARD AS REQUIRED OF APPROVED MAKE & DESIGN WITH NECESSARY MAT ERIAL COMPLETE.

"LAYING OF ONE NUMBER PVC INSLUATED POWER CABLE OF 1.1.KV GRADE OF SIZE EXCEEDING 25SQ.MM BUT NOT EXCEEDING 120 SQ.MM DIRECT IN GROU ND INCLUDING EXCAVATION, SAND CUSHIOING, PROTECTIVE COVERING AND REFILLING THE PIT ETC. AS REQUIRED."

SHRI NARESH KUMAR SAHU

RAJNISH PRASAD DWIVEDI