Karnataka

AOC

Works

Irrigation and Other Works

Providing Irrigation Facilities through Lift Irrigation (Pipeline) from Devapur Hire Halla to Agricultural Lands of Devapur and Konal-K Villages in Shorapur Taluka Yadgir District

Minor Irrigation Department

Minor Irrigation Division Kalaburagi | Kalaburagi, Karnataka

Amount: ₹40.8 LCloses: 6 Mar 2026Closed

Bids

1 Bid6 Mar 2026

#	Company	Amount	Status
1	₹40.7 Laccepted-aoc	₹40.7 L	accepted-aoc

Tender Value

₹40.8 L

EMD Value

₹1.0 L

Closing Date

6 Mar 2026, 10:59 pmClosed

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

Providing Irrigation Facilities through Lift Irrigation (Pipeline) from Devapur Hire Halla to Agricultural Lands of Devapur and Konal-K Villages in Shorapur Taluka Yadgir District

Tender Information

Tender ID

269908

Reference Number

MI/2025-26/IW/WORK_INDENT11008

Tender Type

Open

Product Category

Irrigation and Other Works

Location

Minor Irrigation Division Kalaburagi

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAchieved in at least two financial years during the last five years i.e 2020-21 to 2024-25 an average annual financial turnover in all classes of civil engineering construction works only of Rs.40.78 Lakhs. Financial turnover of previous years will be given a weightage of 10 percent per year to bring them to the price level of the FY 2025-26.

RequiredSatisfactorily completed at least 50 percent of the contract value in last five years i,e 2020-21 to 2024-25 as prime contractor any one similar work of nature i.e, L.I.S work of value not less than Rs.20.39 Lakhs The Work Done Certificates shall be issued by the Executive Engineer The cost of work executed in the previous work shall be updated to 2025-26 at 10 percent per annum.

RequiredLine of Credit in prescribed format in Bank letter head liquid assets and /or availability of credit facilities of not less than Rs.12.23 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.

RequiredKPWD Class III & Above KPWD Civil/Electrical Registration license Certificate

RequiredAssessed Available Tender Capacity as per K/W-2

RequiredLatest IT Returns copies

RequiredGST Registration Certificate

RequiredPAN Certificate

RequiredLatest address and contact number for communication to be furnished

RequiredThe Tenderer has quote his rate by excluding GST. However Contract will be concluded for the amount Exclusive of GST but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer /Employer has to accept the revised GST rates for making payment / recovery.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP portal on or before the last date and time of bid submission

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

EMD Payments through KPPP portal mode shall be made as one single transaction and payments made in part are liable for rejection

Conditional / Incomplete Tenders are liable to be rejected .The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Tenderer shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the bid.

The cost of the Tender form shall not be refundable.

The successful bidder, before commencement of work shall produce Establishment registration certificate registered under labour department, Government of Karnataka . And shall engage only registered construction workers registered under labour department, Government of Karnataka

As per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt: 1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund.

Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2025-26 in the Technical Qualification Criteria .

Name, address, telephone, email id and fax numbers of the contractor is to be provided for communication.

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

Sub-Leasing/G.P.A of Work is Prohibited.

The contractor have been registered as KPWD Civil/Electrical class-III & Above Registration Certificate (up load registration certificate of original should be produced while opening the tender)

Addendum / Corrigendum will be published on the website for all modifications or corrections, if any.

The period of completion is 06 (SIX months) including monsoon.

The intending bidders are advised to visit the site of work, and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities, etc.

The necessary certificates/documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to the e-tender document. The original certificate documents shall be produced for verification when demanded, otherwise, the tender will be treated as a non-responsive bid and rejected.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The tenderer shall furnish required information in all formats. Scan and upload all Formats/Original documents required for this bid to the KPPP portal. The Original Formats/Documents shall be produced at the time of opening of Technical Bid for physical verification.

The Tenders are invited as per Standard tender Bid Document KW-2

Uploaded drawings are for TENDER PURPOSE ONLY

Omission and Typographical errors which are in the opinion of the Executive Engineer will not be a ground for claims of extra payment

Security deposit for an amount equivalent to 5% of the Contract Price shall be deducted in every running bill. However, in case of first and final bill the entire security deposit will be deducted from the final bill.

The Tenderer has to quote his rate by excluding GST. However Contract will be concluded for the amount (Exclusive of GST) but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer/ Employer has to accept the revised GST rates for making payment / recovery.

The Agency shall comply with ISO14001 (Environmental Management System) requirement during execution of work.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

Should uploaded work done certificate comprising of work executed as 1)PROVIDING AND INSTALLING AT SITE OF WORK 160mm PVC PIPES OF QTY 2592.00m 2) SUPPLY AND ERECTION OF 25KVA NEW DISTRIBUTION TRANSFORMER OF QTY 1No

Work Done Certificate

3.2 (b)Satisfactorily completed (at least 90% of the contract value) in last five years(i,e 2020-21 to 2024-25) as prime contractor of any one similar work of nature i.e L.I.S of value not less than Rs.20.39 Lakhs.(The Work Done Certificates shall be issued by the Executive Engineer)(The cost of work executed in the previous work shall be updated to 2025-26 at 10% per annum).

Others -- workdone

Capabilities of Vendor

3.3(b) liquid assets and /or availability of credit facilities of not less than Rs. 12.23 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.

Others -- loc

KPWD Class III & Above KPWD Civil/Electrical Registration license Certificate

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

3.2 (a)Achieved in at least TWO financial years during the last five years (i.e 2020-21 to 2024-25) an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 40.78 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2025-26

Others -- annual turnover

Fee & Financial Details

Tender Fee Amount

₹1,020

EMD Fee Amount

₹1.0 L

Important Dates

Last Activity

6 Mar 2026

Published

25 Feb 2026

Bid Opening

7 Mar 2026

Download Ends

5 Mar 2026

BOQ Preview

•

Providing Irrigation Facilities through Lift Irrigation (Pipeline) from Devapur Hire Halla to Agricultural Lands of Devapur and Konal-K Villages in Shorapur Taluka Yadgir District

•

Supply and delivery of 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments wi...

•

Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments with all leads and lifts, et...

•

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments with all leads and lifts, etc. complete as per spec...

•

Labour charges for providing connection using 3.5 x 16 sqmm insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary mate...

•

Supply and delivery at site Brand new best make 1x3x6 Sqm PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendment...

•

Providing, laying and jointing HDPE Grade PE80-PN6.0, 140mm dia pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloadi...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Earth work excavation by manual means in all kinds of soils depth upto 1.5 m for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such similla...

•

Providing and installing at site of work 160mm (weight of pipe -3.923 kg) 6 Kg/m2 P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, ...

•

Providing and installing at site of work 110 mm dia (weight of pipe-1.894 kg) 6 Kg/m2 P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to li...

•

Providing and installing at site of work 90mm (weight of pipe-1.313 kg) 6 Kg/m2 P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, lev...

•

Refilling available earth around trenches/ pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...

•

Providing, laying and fixing of light Duty 100 mm dia GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads where...

•

Supply and delivery at site wrought middle steel (galvanized) 150 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any with all leads and lifts, etc. complete as per specificat...

•

Supply and delivery at site wrought middle steel (galvanized) 150 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any with all leads and lifts, etc. complete as per specificat...

•

Supply and delivery at site of brand new best make 80 mm non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments with all leads and lifts, etc. complete as per specification...

•

Providing and fixing 80 mm dia kinetic air valve of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/ EN 1074-4. Body and bonnet of DI conforming to I...

•

Supply and delivery at site GM (copper alloy) 80 mm dia gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral sea...

•

Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...

•

Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...

•

Providing random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upt...

•

Providing coursed rubble masonry (first sort) with hard stone in foundation and plinth with cement mortar 1:6 (1 cement: 6 coarse sand)

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

•

Erection and positioning of RCC Hume pipe pump house/ Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools, plants and materials with ...

•

Providing 20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Electrification: HT Line: Supplying and erection of PSCC Pole-8 Mtr Long, 200 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-...

•

Supplying and erection of RCC Pole-8 Mtr Long, 115 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 with all leads and lift...

•

Providing & fixing of 11 kV, Horizontal Cross Arm-Mild Steel (MS) (Dwg No. BESCOM/ GM/ QS&S/ 04 Dtd 24.11.2018) with all leads and lifts, etc. complete as per specification and as directed by the Eng...

•

Providing and stringing of Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/Km with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories with all leads and lifts, etc. c...

•

Providing 11 kV Ceramic Pin Insulator (Shell Only) with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing 11 kV GI Pin for 11 kV Ceramic Shell Insulator with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing DISC Insulator 45 kN Porcelain with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing Spiral earth electrode with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

EG Stirrup (MS) with GI wire lacing with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

DTC: Supply and erection of 11KV/ 433 V, 25 KVA Aluminium Wdg (BEE-4 Star Rated) new Distribution Transformer on Transformer structure including loading with all accessories with all leads and lifts, ...

•

Supplying and erection of RCC Pole-9 Mtr Long, 145 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 with all leads and lift...

•

Providing GI Grounding pipe, B-Class, 42 mm dia, 2.5 m long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg including cost of charcoal and salt packed in ...

•

Providing 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/ Km with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/ Km with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing 11 kV Ceramic Pin Insulator (Shell Only) with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing DISC Insulator 45 kN Porcelain with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing 11 kV GI Pin for 11 kV Ceramic Shell Insulator with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing & fixing of 1.1 KV Class HR (Heat Resistant) 50 sqmm PVC Insulated & unsheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 with all leads and lifts, etc. complete...

•

Providing LT protection kit as per Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018 with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charg...

•

Supply of 3-No. of 9kV, 5kA lightening arrestor, metal oxide ceramic type with ground disconnector as per Dwg No. BESCOM/ GM/ QS&S/ 26 dt: 24.10.2007) with all leads and lifts, etc. complete as per sp...

•

LT Metering Box for housing the ETV Meter without CT's busbar wiring etc. with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

SMC metering box as above With CT Ratio 50/5 for 15/25 kVA DTC with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Providing & fixing of LT-3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering) with all leads and lifts, etc. complete...

•

LT Line: Providing RCC Pole-8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/ GM/ QS&S/05 Dtd 24.11.2018) as per IS-785 with all leads and lifts, etc. complete as per specification and as directed by the Enginee...

•

Supply and delivery at site MS LT-4 pin cross arms with clamps, bolts, nuts & washers with braces with all accessories with all leads and lifts, etc. complete as per specification and as directed by t...

•

Providing No. 8 strain insulator with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

•

Supply and stringing Weasel ACSR conductors with 1.5% sag with all accessories with all leads and lifts, etc. complete as per specification and as directed by the Engineer-in-charge.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

PIPE LINE WORK MAP.pdf

Others - DRAWING • 0.17 MB

KW-2_ 11008.doc

Tender Document • 1.51 MB

Detailed_Specification.doc

Others - specifications • 0.78 MB

Ready to Participate?

Download all tender documents and submit your bid