Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹2.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 24x7 PHC Building at Kusanga of Loisingha Block under National Health Mission in the Bolangir district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/002
NBCC/ODISHA/ZO/NHM/NIT/22-23/002
Open Tender-Domestic
Civil Works General
Balangir, Odisha
₹11,800
₹2.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
watering curing, cost of carriage, royalty and taxes
of all materials, cost of all labour, etc complete as
per the direction of E.I.C.
Brick work with Fly Ash. Bricks in cement mortar
(1:4) in Super Structure having crushing strength
31 10 not less than 75.00 kg/cm2 immerging the bricks in Cum 12.24 6554.43 80,226.20
water not less than six hours before use in
12mm thick C.P.(1:6) on brick masonary to the
smooth surface including watering, curing, cost,
32 11 carriage, royalty of all materials, cost of all labour, 0 0.00 0.00 0.00
etc complete as per the direction of E.I.C.
16mm thick C.P. (1:6) over brick masonary to the
smooth surface including watering, curing cost,
carriage, royalty, and taxes of all materials, cost of
35 12 all labour, etc complete as per the direction of E.I.C. 0 0.00 0.00 0.00
37 0 HEAD ROOM (STAIRCASE 1) 34.53 255.82 8,833.60
Supplying, fitting and fixing Vitrified tile in floors of
approved make conformaing to IS:13755 laid on 20
mm thick cement mortar (1:4) and filling joints with
38 13 white cement of approved quality including cost of Sqm 569.62 1405.73 8,00,734.20
all materials, etc. required for the work all complete
as per direction of E.I.C.
Fixing Vitrified tiles in dados skirting and risers of
steps on 12mm thick CP (1:3) jointed with neat
39 14 cement slurry mixed with pigments to match the Sqm 213.94 1541.08 3,29,698.66
shade of the tiles including cost, carriage, cost of all
labour etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Providing and fixing 20mm thick Granite stone
flooring (sample of Granite stone should be
approved by EIC) for stair case trade, riser and
similar locations where ever required in
horizontal/vertical surfaces of required size of
approved shade, colour and texture, with moulding
40 15 edge & Grooving etc. laid over 20mm thick bed of Sqm 45.01 2626.44 1,18,216.24
cement mortar 1:4 (1 cement: 4 coarse sand) with
joints treated with white cement mixed with
matching pigment, epoxy touch ups including
rubbing, curing, moulding and polishing to give high
gloss finish etc. complete as per direction of
Engineer-in-charge. In all floors and all heights.
Finishing surface of walls with cement based wall
putty (water based) of approved make and finished
smooth and even surface to receive painting
41 16 including cost of scaffolding staging charges with Sqm 2155.60 87.91 1,89,498.80
cost of all materials labour T & P etc. as per
direction of Engineer -In -charge. in Ground Floor
Priming 1 coat with wall primer water bond cement Sqm 2848.10 74.10 2,11,055.60
42 17 primer including all labour, materials etc. complete.
Wall Painting two coats with approved Distemper in Sqm 2369.54 78.23 1,85,378.59
Wall Painting two coats with approved Distemper in Sqm 46.07 80.12 3,691.22
Wall painting two coat with any approved weather
coat paint including cost of all materials, labour and
T&P require for the work etc. complete as directed
46 0 GROUND FLOOR(OVER 12 mm CP) Sqm 478.56 90.86 43,481.96
47 0 HEAD ROOM (OVER 12 mm CP) Sqm 136.20 94.16 12,825.14
Supplying of M.S. Door, Window with grills, Grills
made out of M.S. Angle frame, M.S. Flat, Sheet etc
of approved section & design, electrically welded
properly with all necessary locking arrengement,
and 1 coat red oxide primer including cost of all
materials, labour charges, carriage of materials to
site etc. complete.
Supplying, fitting and fixing of stainless steel of 304
grade in hand railing using 50 mm dia of 2 mm thick
circular pipe with Balustrade of size 32 mm x 32mm
x 2mm @ 0.90 mtr C/C and stainless aquare pipe
51 22 bracing of size case as per approved design and Kg 569.48 395.42 2,25,182.64
specification, buffing, polishing etc. with the cost,
conveyance taxses of all material, cost of all labour
etc. complete in all respect.
Factory made 30mm laminated flush door shutter
52 23 with all labour, iron fittings, and wooden hinged Sqm 50.30 4264.40 2,14,499.42
cleats etc fitted and fixed complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Factory made solid WPC door frame of size
95mmx55mm fabricated .The door frame consist of
four segments which are provided with plug-in-
socket arrangement in-situ in the mould. The
segments are plugged in and are joined together by
means of screw . The WPC frame shall be provided
with the material and process for manufacturing the
door frames shall conform to relavent I.S
53 24 Specification. the finish of door frame will be plain Rmt 99.55 1314.87 1,30,895.71
colour white /lvory/Beige/light grey/Golden
brown/mahogany/Teak wood /sand
stone/Champagne/pastel blue of any other colour
using high quality pigments complete in all respect
as per specification and direction of the engineer in
Supplying and fitting-fixing of Un-plasticised Poly
Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)
Three Track - Three Panel sliding window– 60-
Series duly manufactured using UPVC reinforced
profiles of 108mm x 45 mm x 2.5 mm for outer
frames and Window Sash of 39 mm x 58 mm x 2.5
mm capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to
50 microns of minimum thickness of 1.5 mm
54 25 prefabricated & welded through fusion welding the Sqm 52.38 7061.12 3,69,861.47
window frame shall be fitted with 6 mm thick clear
toughened glass of SAINT-GOBAIN make duly fixed
with EPDM weathering seal resistant and the
system is to be installed using Reinforced Large
Coupler at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials,
accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-477-95 and other
Priming one codes
any approved primmer (To
Receive Enamel paint) including cost of primmer &
labour to give an even shade excluding cost of
primer. (As per A.R. 93/1)
Painting two coats with approved enamel paints of
approved colour, shade over a coat of primer
including sand papering, polishing the surface, cost,
56 27 conveyances of all materials and cost of all labour 0 0.00 0.00 0.00
etc, complete as per specification & direction of
Brick work with Flyash Bricks 23cm x 11cm x 8cm
size having crushing strength not less than
75Kg/cm2 with dimensional tolerance ±2 percent in
cement mortar (1:6) in Super Structure including
watering curing, cost of carriage, royalty and taxes
of all materials, cost of all labour, etc complete as
per the direction of E.I.C.
Finishing surface of walls with cement based wall
putty (water based) of approved make and finished
smooth and even surface to receive painting
61 29 including cost of scaffolding staging charges with Sqm 11.54 89.56 1,033.55
cost of all materials labour T & P etc. as per
direction of Engineer -In -charge.
Priming 1 coat with wall primer water bond cement
62 30 primer including all labour, materials etc. complete. 0 0.00 0.00 0.00
64 0 Over(16 mm Celling CP) Sqm 46.07 75.87 3,495.52
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying and fitting-fixing of Un-plasticised Poly
Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)
Three Track - Three Panel sliding window– 60-
Series duly manufactured using UPVC reinforced
profiles of 108mm x 45 mm x 2.5 mm for outer
frames and Window Sash of 39 mm x 58 mm x 2.5
mm capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to
50 microns of minimum thickness of 1.5 mm
prefabricated & welded through fusion welding the
window frame shall be fitted with 6 mm thick clear
toughened glass of SAINT-GOBAIN make duly fixed
with EPDM weathering seal resistant and the
system is to be installed using Reinforced Large
Coupler at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials,
accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-477-95 and other
applicable codes and standards.
Priming one coat with any approved primmer (To
Receive Enamel paint) including cost of primmer &
66 32 labour to give an even shade excluding cost of Sqm 1.18 68.44 80.75
primer. (As per A.R. 93/1)
25mm thick CC 1:2:2 with 6mm size CB chips for
grading concret over roof slab etc. complete.
Supplying all materials, labour, T&P and providing
Pidifin 2K including conveyance of all materials to
68 34 worksite, payment of royalty, taxes etc all complete Sqm 750.00 292.64 2,19,480.00
as per specification and direction of the Engineer in
Factory made GIRID FRP or called GRP sandwich
composite door shutter of 32mm thick laminated
with two GRP skin with good grain finish fabricated
using UV stabilised isoppthalic gel coat and one
layer of 450 gsm E-glass chopped strand mat (CSM)
impregnated with ortopathilic resin The thickness of
the skins shall not be less than 1.50mm . Expanded
polysryne ( EPS) structural foam panel of 29 mm
tickness and a density of 20kg/cu.mts shall be used
as core material wooden reinforcements made of
sesasoned sal wood block of cross section not less
than 28mm x 32mm and also necessary sal wood
reinforcements for fitting the metal fittings such as
lower bolts ,aldrops, handles etc. shall be provided .
A structural adhesive compatible with (EPS)foam
shall be used for bending the core material. the sal
wood reinforcements and the skin The material and
process for manufactuing te door shutter shall
conform to RV -TIFAC components design centre's
standards and specification and the door shutters
tested in conformation to IS 4020-1998. The Finish
of door shutter will be plain colour as per
specification and direction of the Engineer in
Charge. etc. complete
70 0 Sub-Total of Civil Works 0 0.00 0.00 1,47,21,687.29
71 0 Plumbing Works 0 0.00 0.00 0.00
72 0 (INTERNAL P.H. & SANITARY WORK. :- 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
GPH Works: Supplying all materials, labour, T&P
and providing and fixing to wall or ceiling and floor
pvc pipes confirming to ASTM-D- 1785/89 (Sch-80)
and pipe fittings of the following nominal borewith
73 1 clamps including making good the wall, ceiling and 0 0.00 0.00 0.00
floor, testing all complete as per specification and
direction of the Engineer-in-charge.
75 0 20 mm CPVC (sdr-13.5) pipes (Oriplast/Supreme) Mtr 61.00 242.84 14,813.48
76 0 25 mm CPVC(sdr-13.5) pipes (Oriplast/Supreme) Mtr 50.00 323.44 16,171.90
77 0 32 mm CPVC sdr-13.5 pipes (Oriplast/Supreme) Mtr 34.00 472.24 16,056.02
78 0 40 mm CPVC sdr-13.5 pipes (Oriplast/Supreme) Mtr 38.00 659.97 25,079.01
79 0 50 mm UPVC sch-80 pipes(Oriplast/Supreme) Mtr 53.00 739.74 39,206.33
81 0 50 mm UPVC sch-80 pipes(Oriplast/Supreme) Mtr 61.00 249.22 15,202.18
supplying all materials, labour, T&P and cutting
holes through existing brick work including making
good the damages in cement mortar (1:4) for taking
82 2 G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. 0 0.00 0.00 0.00
all complete as per P.H. specification and direction
of Engineer-in-charge.
83 a) Ground Floor :- 250 mm thick wall Each 10.00 60.18 601.80
Supplying all materials, labour, T&P and cutting hole
in R.C.C floors, roofs, etc upto 19 cm thick for
passing G.I. Pipes / P.V.C pipes and fittings etc and
repairing the holes after insertion of pipes etc with
cement concrete (1:2:4 ) including finishing
complete so as to make it leak proof as per direction
of the Engineer-in-charge.
85 a) Ground Floor :- 250 mm thick wall Each 10.00 188.80 1,888.00
Supplying all materials, labour, T&P and cutting
grooves in pucca floors and walls for taking
86 4 G.I./P.V.C. pipes and making good the damages as 0 0.00 0.00 0.00
per direction of the E.I.C.
Supplying all materials, labour T&P and fitting and
fixing brass/CP fittings of the following nominal bore
88 5 with supply of all joiniting materials complete as per 0 0.00 0.00 0.00
specification and direction of the Engineer-in-
Supplying all materials, labour, T&P and fixing
standard sized two way Bib cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good
89 a) the damages, including cost of all materials Each 10.00 3126.41 31,264.10
complete as per PH specification complete as per
direction of Er-in-charge. 15mm dia CP Two way bib
cock with Flange Jaquar FLR-5053N.
Supplying all materials, labour, T&P and fixing
standard sized Bib cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good
90 b) the damages, including cost of all materials Each 2.00 4142.74 8,285.49
complete as per PH specification complete as per
direction of Er-in-charge.15mm dia. nominal bore
Long body Bib Cock Jaquar FLR-5163
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
standard sized Bib cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good
91 c) the damages, including cost of all materials Each 2.00 1471.22 2,942.45
complete as per PH specification complete as per
direction of Er-in-charge.15mm dia. nominal bore
Short body Bib Cock Jaquar FLR-504N
Supplying all materials, labour, T&P and fixing
standard sized 15mm dia angular Stop cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good
92 d) the damages, including cost of all materials Each 42.00 1831.24 76,912.16
complete as per PH specification complete as per
direction of Er-in-charge. 15mm dia CP angle stop
cock with wall flange Jaquar FLR-5053N
Supplying all materials, labour, T&P and fixing
standard sized pillar cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making good
93 e) the damages, including cost of all materials Each 14.00 1471.22 20,597.14
complete as per PH specification and direction of
Engineering-in-charge. 15mm dia brass pillar cock
Jaquar Continental Cat. No.- -Jaquar FLR - 5011N
Fixing of 25mm dia Brass / Gun meta ball Valve
confirming to IS : 781-1995 of approved make as
per specification complete as per direction of Er-in-
charge.32mm dia brass or gun metal full way valve
Fixing of 32mm dia Brass / Gun meta ball Valve
confirming to IS : 781-1995 of approved make as
per specification complete as per direction of Er-in-
charge.32mm dia brass or gun metal full way valve
Fixing of 40mm dia Brass / Gun meta ball Valve
confirming to IS : 781-1995 of of approved make
96 h) as per specification complete as per direction of Er- Each 13.00 1563.62 20,327.03
in-charge.40mm dia brass or gun metal full way
valve(shakti make)
Fixing of 50mm dia Brass / Gun meta ball Valve
confirming to IS : 781-1995 of of approved make
97 h) as per specification complete as per direction of Er- Each 6.00 3010.53 18,063.20
in-charge.40mm dia brass or gun metal full way
valve(shakti make)
98 0 15mm dia PVC connection pipe 450 mm long Each 42.00 118.00 4,956.00
99 0 15mm dia CP Extention Nipple Each 42.00 47.67 2,002.22
Providing and fixing circular type stainless steel
jalli (grating) with hole for floor /nahani trap etc
100 i) complete as per specification and direction of the Each 14.00 92.16 1,290.21
Engineer in charge.
Supplying all materials, labour, T&P and fixing
Health Faucet of Hindware/Jaquar/Parryware
complete with Chromium plated brass brackets fixed
101 6 to wooden plugs with Chromium plated brass screws 0 0.00 0.00 0.00
as per specification and direction of the Engineer-In-
15mm dia CP Health Faucet of Jaquar 1.2mtr long,
8MM dia Jaquar ALD-577.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fitting and
fixing U-PVC SWR soil waste ventilating pipes and
fittings of the following outside diameter conforming
to ISI No 13592/1992 to walls with nails, bobbins
and wooden plugs or laying in trenches including
jointing with supply of approved rubber lubricant by
103 8 non-heat application method/as per manufacturer's 0 0.00 0.00 0.00
specification, testing, earthwork in excavation in all
kinds of soil and refilling of trenches as per
specification and direction of the Engineer-In-
110mm diameter U-PVC SWR pipes(Oriplast type-
108 0 110mm U-PVC door bend Each 10.00 155.41 1,554.06
109 0 110mm U-PVC plain shoe bend Each 10.00 220.07 2,200.70
110 0 110mm U-PVC vent cowl Each 10.00 45.31 453.12
112 0 110mm U-PVC plain bend Each 10.00 85.31 853.14
113 0 100mm S/S coupling with EPMD Each 30.00 431.05 12,931.62
Supplying all materials,labour T&P and cutting holels
through existing brick or laterite masonry wall for
taking H.C.I pipes and fittings including making
114 9 good the damages etc. all complete as per 0 0.00 0.00 0.00
P.H.Specification and direction of the Engineer-In-
115 0 250mm to 375mm thick wall Each 42.00 60.18 2,527.56
Supplying all materials, labour T&P and and fixing
12.50 liters/10 liters capacity low level flushing
cistern of Hindware/Jaquar/Parryware with a pair of
cast iron or M.S. brackets complete with fittings
such as siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP brass
handle,unions and couplings for connection with
116 10 inlet, outlet and overflow pipes, 32mm dia CP long 0 0.00 0.00 0.00
flush bend, 15mm dia pvc inlet connection pipe
including cutting holes and making good the same
and connecting the flush bend with cistern and
closet and connceting the inlet pipe with suupply
main etc all complete as per the specification and
direction of the Engineer-in-charge.
10 Liters capacity PVC cistern with 32mm dia flush
bend. Hindware sleek fresh single flush Starwhite,
Size 47.6 X 15.5 X 32.5 cm
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan (Indian
type W.C pan/Orissa pattern squatting pan) of
Hindware/Jaquar/Parryware duly embedded in
cement concrete (1:4:8) using 4cm size hard
granite metal including fixing a pair of vitreous china
118 11 250mm x 130mm x30mm footrest, fixing 100mm 0 0.00 0.00 0.00
dia HCI 'p' or 's' trap (with/without 50mm dia horn)
for water colset squatting pan including jointing the
trap with pan in cement mortar (1:1) cutting the
floor and mending good the damages etc all
complete as per specification and direction of the
Engineer-In-Charge.
Hindware Orissa Pan cat no 20004 Starwhite. Size-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing the
following vitreous china Wash Down Water Closet
(Wall hung European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's'
trap to the floor with wooden plug and chromium
plated pedestal screws including jointing the trap
120 12 with soil pipe in cement mortar (1:1) fixing plastic 0 0.00 0.00 0.00
seat and cover for wash down water closet with
chromium plated brass hinges and rubber buffers
including polishing etc all complete as per
specification and direction of the Engineer-In-
Wall hung EWC with 'p' / S trap plain FLS-WHT-
Supplying all materials, labour, T&P and fixing the
following vitreous china Wash Down Water Closet
(European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's'
trap to the floor with wooden plug and chromium
plated pedestal screws including jointing the trap
122 13 with soil pipe in cement mortar (1:1) fixing plastic 0 0.00 0.00 0.00
seat and cover for wash down water closet with
chromium plated brass hinges and rubber buffers
including polishing etc all complete as per
specification and direction of the Engineer-In-
Hindware slick cat no-20011 (S-28.5/P-18)
123 0 Starwhite EWC SLICK size-52x36x39 cm Each 5.00 5573.38 27,866.88
Supplying all materials, labour T&P and fixing wash
basins of Hindware/Jaquar/Parryware with hole for
pillar taps with cast iron or M.S.brackets painted
white including cutting holes in walls and making
good the damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for wash
basin recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm nominal
124 13 diameter for wash basin including brass check nut 0 0.00 0.00 0.00
complete, fixing pillar taps capstan head screw
down high pressure lettered 'Hot' and 'Cold' with
long screws, shanks and back nuts of 15mm dia
nominal bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks and
supply mains for wash basin, fixing 32mm dia CP
brass waste, etc all complete as per specification
and direction of the Engineer-In-Charge.
Jaquar wall hung Wash Basin Size -
5801/5301Starwhite.
126 14 Countersunk Wash Basin 0 0.00 0.00 0.00
Supplying all materials, labour T&P and fixing
counter sunk Wash Basin Size -
127 0 545mmx545x180mm, Cat.No. FLS-WHT-29601 with Each 8.00 8071.55 64,572.43
all fittings as per direction of the engineer-in -
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing Flat
back large pattern urinal of
Hindware/Jaquar/Parryware the following sizes
including connecting the urinal with 32mm dia pvc
waste pipe 910mm long by means of white lead
mixed with chopped hemp, fixing 32mm dia CP
128 15 dome waste, 15mm dia CP spreader including Each 8.00 7444.15 59,553.18
cutting holes in walls land making good the
damages with supply of wooden plugs, screws and
cement etc all complete as per specification and
direction of the Engineer in charge. Hindware Flat
back large urinal cat no-60002 starwhite, Size-
Supply and fixing all materials, labour, T & P and
providing urinal partition with italian collection
all complete as per direction of the Engineer-In-
Charge. Make-Hindware.
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on 6mm thick
A.C.sheet or plywood sheet and fixed to wooden
plugs with CP screws and washers complete as per
specification and direction of the Engineer-in-
750mmx600mm size B.E.mirror (Alpina/Golden
Supplying all materials, labour, T&P and fixing
standard size glass-shelf of
Hindware/Jaquar/Parryware with CP brass brackets
and guard rails complete fixed to wooden plugs with
CP screws as per specification and direction of the
Engineer-in-charge.
133 0 Jaquar glass shelf ACN-1171 N 600mm long Each 14.00 1808.70 25,321.86
Supplying all materials,labour, T&P and fixing
standard sized CP towel rail 24" of
Hindware/Jaquar/Parryware complete with CP brass
134 18 brackets fixed to wooden plugs with CP screws as 0 0.00 0.00 0.00
per specification and direction of the Engineer-In-
25mmx600mm long CP towel rail (Jaguar make)
Supplying all materials, labour, T&P and fixing
standard sized Chromium Plated brass towel ring
complete with Chromium Plated brass brackets
136 19 fixed to wooden plugs with Chromium Plated brass Each 8.00 1453.72 11,629.73
screws as per specification and direction of the
Engineer in charge
Supplying all materials, labour, T&P and fixing
standard sized Chromium Plated soap case of
Hindware/Jaquar/Parryware complete with
137 20 Chromium Plated brass brackets fixed to wooden 0 0.00 0.00 0.00
plugs with Chromium Plated brass screws as per
specification and direction of the Engineer in charge
138 0 CP soap holder (Jaguar make) ACN-1131N. Each 14.00 903.17 12,644.41
Supplying all materials, labour, T&P and fixing
standard sized Robe Hook of
Hindware/Jaquar/Parryware complete with all as per
139 21 specification and direction of the Engineer in charge. Nos 6.00 978.57 5,871.44
Jaquar Robe hook AGA-BIV-31791
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
standard sized Soap Dispensor of
Hindware/Jaquar/Parryware complete with all as per
140 22 specification and direction of the Engineer in charge. Nos 14.00 2054.38 28,761.32
Soap dispense with Glass Bottle. CAN-1135N.
Providing and fixing Salem Stainless steel A ISI
(18/8) kitchen sink as per IS : 13983 with C.I.
Brackets and stainless steel plug 40 mm including
painting of fittings and brackets, cutting and making
good the walls wherever required. a) Kitchen Sink
with drain board Nirali make size 510 X 1040 mm
bowl depth 178 mm.
Supplying & fixing of Matrix Set-1 Mat code-
70002,EWC : (P-18) (WB 46X36 with one pair
mounting brackets, EWC & cistern complete with
142 24 fittings & seat cover, one no hinged rail 76 cm and 4 Nos 1.00 83647.37 83,647.37
nos of grab rail 60cm complete with all as per
specification & direction of the Engineer in charge.
Supply all materials, labour, T&P and providing
fitting & fixing (Aqua guard) pure Chill 80 PSS UV of
size 750x570x1350 mm height with water storage
capacity 120 liters along with 2 nos of fancets 1 for
143 25 cold water and 1 for normal water including a flow of Nos 1.00 102660.00 1,02,660.00
1.5 ltr per minute etc. all complete as per approved
drawing, specification and direction of the EIC.
Supplying all materials, labour, T&P and fixing 100
mm dia wall mounted over head shower & Shower
arm Hindware/Jaquar/Parryware including cutting
the wall and making good the damages, including
144 26 cost of all materials complete as per PH specification Nos 2.00 7756.38 15,512.75
and direction of Engineer-in-charge. 100 mm dia CP
overhead shower with Arm (Jaquar -OHS-1989,
Jaquar SHA 483)
Supplying all materials, labour, T&P and fixing
standard sized 15mm dia Single lever Concealed
Deusch mixer with provision for connection to
overhead shower only of
145 27 Hindware/Jaquar/Parryware of approved make etc Each 2.00 3039.33 6,078.65
complete including cutting the wall and making good
the damages, including cost of all materials
complete as per PH specification complete as per
direction of Er-in-charge. Concealed stop cock
Jaquar FLR-5227.
Fixing Rotational moulded Poly Propelene double
layer cylindrical vertical water storage tanks
confirming to IS 12701-1996 including cutting holes
through the tank and fixing mild steel tubes and
fitting and providing extra sockets and jam nuts,
146 28 fixing ball valve etc,including hosting upto a height 0 0.00 0.00 0.00
of 5 mtr above ground level and placing the tank to
the required postion etc all complete as per
specification and direction of the Er-in-charge.
2000 ltr capacity Double layer cylindrical vertical
147 0 water storage tanks Each 7.00 26276.07 1,83,932.51
148 0 EXTERNAL P.H. & SANITARY WORK. :- 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T & P and
constructing Gully trap chamber of the following
inside size with 8 cm thick R.C.C. precast cover slab
in CC (1:2:4) mix using 12mm size h.g. chips,
foundation concrete (1:4:8) using 40mm size h.g.
metal on bed aound trap , Fly Ash brickwork in CM
149 65 (1:6) in P&F and inside 12mm thick cement 0 0.00 0.00 0.00
plastering (1:3) finished with a floating coat of neat
cement including fixing 100mm x100mm size gully
trap, 150mm x150mm C.I gratig etc. all complete as
per aproved drawing, specification and direction of
Engineer-in-charge.
150 0 250mmx250mm with RCC cover Each 8.00 1321.13 10,569.02
Supplying all materials, labour, T & P and
constructing Inspection chamber of the following
inside size with CC (1:3:6) mix using 40mm size
h.g. metal on bed, Ist class Fly Ash brickwork in CM
(1:6) , moulding and shaping the channel inside and
benching with CC (1:2:4) using 12mm size h.g.
chips, 12mm thick cement plastering (1:3) finished
with punning to inside , cement flush pointing (1:3)
151 66 to outside , R.C.C. cover slab in (1:2:4) using 12mm 0 0.00 0.00 0.00
size h.g. chips with RCC man hole cover , earth work
in excavation in all kinds of soil and refilling the
cavity around the chamber including watering
,curing, conveyance of all materials to worksite ,
payment of royality , taxes etc. all complete as per
aproved drawing , specification and direction of
Engineer-in-charge.
152 0 Inside size 760mm x760mm x450mm Each 6.00 9633.40 57,800.41
Supplying all materials, labour, T&P and laying in
trenches (to level or slope) unplasticized PVC pipes
conforming to IS: 4985/2000 of the following
outside dia for class-3(0.60mpa) including jointing
with supply of approved solvent cement by non-heat
application method/as per manufacturer’s
154 67 specification, providing and laying in trench cement 0 0.00 0.00 0.00
concrete (1:4:8) with 40mm size hard granite metal
in the Type C-1 standard bedding surrounding or
encasing including concrete for bedding and curing
etc all complete as per PH specification and direction
of the Engineer-in-charge.
155 a) 110mm dia u-pvc pipe alround concrete mtr 60.00 1301.66 78,099.48
156 b) 160mm dia u-pvc pipe alround concrete mtr 60.00 2157.63 1,29,457.80
Supplying all materials, labour, T&P and
constructing Man hole chamber of the following size
with cement concrete (1:3:6) using 40 mm size HG
metal on bed , !st class Fly Ash Brick work in CM
(1:6) moulding and shaping the channel inside and
benching with CC (1:2:4) mix using 12 mm size H.G
chips, 12 mm thick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to
158 68 outside ,RCC cover slab in (1:2:4) mix using 12 0 0.00 0.00 0.00
mm size H.G chips with RCC man hole cover , earth
work in all kinds of soil and refilling the cavity
around the camber including watering, curing,
conveyance of all materials to worksite payment of
royalty, taxes etc. all completed as per approved
drawing, specification and direction of Engineer-in-
159 a) Inside size 900mmx900mmx900mm each 5.00 17849.27 89,246.35
160 b) addl depth of 0.30m upto 4.50m depth each 3.00 2051.08 6,153.23
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
constructing soakway pit of the following size with
precast RCC rings joined loose, gravel backing in the
rear of well steining, precast RCC cover slab in
cement concrete (1:2:4) using 12mm size hg chips
fitted with iron lifting handles including cutting hole
in the rings for inlet pipe,earthwork in open well
161 69 excavation in all kinds of soil and refilling of cavity 0 0.00 0.00 0.00
around the pit & painting the iron works, watering,
curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per
approved specification and direction of the Engineer-
162 a) RCC rings soakway pit 1.8m dia x 2.6m deep each 1.00 20233.58 20,233.58
Construction of 1 No production wells including
scientific source finding through consolidated and
unconsolidated rock with down the hammer drilling
rig or combination rig with PVC pipe and installation
of submersible pump set with all acessories Labour
for drilling a perfectly vertical bore hole of specified
dia for a specified depth below ground level through
consolidated and unconsolidated rock with down the
hole hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including use of
own rig with its accessories, tools and plant and
164 70 consumables etc for lowering of 200mm/150mm dia 0 0.00 0.00 0.00
G.I/P.V.C/M.S casing pipes for housing fitted with
socket and with or without well screen as per the
necessity for soft, medium, hard and boulder
formation (G.I/ P.V.C/ M.S casing pipes if required
to prevent collapse of overburden is to be provided
by the contractor including lowering and
withdrawing after completion of the tube well),
200mm dia to 400mm dia in overburden portion
including packing of gravel supplied by the
contractor for 400mm dia bore only
Labour for drilling a perfectly vertical bore hole of
specified dia for a specified depth below ground
level through consolidated and unconsolidated rock
with down the hole hammer drilling rig or
combination rig as required to suit the site condition
as per the direction of the Engineer in charge
including use of own rig with its accessories, tools
and plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing pipes for
housing fitted with socket and with or without well
165 0 screen as per the necessity for soft, medium, hard 0 0.00 0.00 0.00
and boulder formation (G.I/ P.V.C/ M.S casing pipes
if required to prevent collapse of overburden is to be
provided by the contractor including lowering and
withdrawing after completion of the tube well),
200mm dia to 400mm dia in overburden portion
including packing of gravel supplied by the
contractor for 400mm dia bore only
166 0 Drilling of 200mm dia bore 0 0.00 0.00 0.00
169 0 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Lowering the following size of G.I/P.V.C/M.S housing
pipes with or without slotted pipes as per the
necessity from ground level up to 45.00m depth and
fitted and fixed up in perfectly vertical position
including cutting and threading of pipes and slotted
171 71 pipes and supplying and fixing all jointing materials, 0 0.00 0.00 0.00
tools and plant etc all complete and keeping the top
of casing pipe threaded including plugging tube
wells to prevent entry of foreign materials.
172 0 Lowering of 200mm dia P.V.C casing pipes 0 0.00 0.00 0.00
Supplying polyvinyl chloride pipes as per ASTM-D-
1785-89 having threads in accordance with DIN
2999 part-1/DIN-42225 part-II specification length
of pipe (laying length) will be 3 mtrs. The pipes shall
be supplied with both external and threaded with
free socket. The pipe having external thread at one
end i.e female and or belled end. The female end
having internal thread is to be belled in order to
175 72 accept the male end while jointing pipes with a bore 0 0.00 0.00 0.00
threading shall be provided with a greave at the roof
of the male thread accomodate flexible PVC/Rubber
'O' ring to make the joint water tight colour of the
pipe shall be blue. The name of the manufacture
along with batch No class of pipe shall be stranded
legibly of each pipe length.
Supplying all materials, labour, T&P and providing
and providing sanitary sealing by cement concrete
grouting of annular space around GI/PVC/MS
housing pipe upto 5m below ground level (as per
drawing) to plug the bore hole excluding cost of
177 73 cement all complete as per direction of the Engineer Each 1.00 1384.26 1,384.26
in charge. Minimum one metre of casing pipe to be
inserted in the bore into the rock at the bottom to
ensure sanitary sealing (excluding cost of cement
which will be supplied directly by the department)
Cleaning and developing the tube well with supply of
compressor worked till clear and adequate discharge
178 0 is obtained from the tube well including supply and 0 0.00 0.00 0.00
use of all necessary equipment and labour as per
direction of the Engineer in charge
Supplying all materials, labour, T&P and providing,
fitting and fixing submersible pump with squirrel
cage induction type submersible type submersible
electric motor to run on 3 phase/1 phase line
voltage ranging from 320 volt to 450 volt
conforming to IS: 8034/89 with following
specifications with suitable control panel, jointing
with GI/PVC/HDPE pipes, electrification, testing,
commissioning, trial running, conveyance of all
materials to worksite, payment of taxes etc all
complete as per specification and direction of the
Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
2 H.P. Single phase/ three phase 3 stage head
renge of 20 to 35 mtr with discharge capasity 145 to
181 0 110 L.P.M With outlet dia 25 mm (keeping 100% Each 1.00 19618.21 19,618.21
182 75 DOL Control panel Each 2.00 4490.49 8,980.98
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
183 76 40mm dia steel short piece Each 2.00 238.36 476.72
185 78 50mm size CI bracket Pair 1.00 107.73 107.73
187 80 20mm dia rigid UPVC pipes Mtr 35.00 8.14 284.97
188 81 Steel rope with cover Mtr 35.00 31.51 1,102.71
Labour charges for lowering including transportation
Supplying all materials, labour, T&P and providing
and fixing to wall or ceiling and floor HDPE pipes and
pipe fittings conforming to IS: 4984/2000
(10kgf/sqcm) of the following nominal bore with
190 83 clamps and jointing by Fusion welding method 0 0.00 0.00 0.00
including testing, making good the wall, ceiling and
floor all complete as per specification and direction
of the Engineer in charge
191 0 32mm HDPE pipes (Finolex/Supreme make) Mtr 85.00 117.76 10,009.94
Earthwork in excavation in all types of soil for site
leveling, foundation, pits, trenches and other civil
works up to and including 1.5 metre lift and stacking
the soil upto a lead of 100 metre and including
193 84 dewatering, removing slush, shoring and strutting Cum 15.75 259.36 4,084.98
(as required), complete as per specification and as
directed by the Engineer-In-Charge.
Filling at all depth with available excavated earth
(excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 15 cm in
194 85 depth : consolidating each deposited layer by 0 0.00 0.00 0.00
ramming and watering complete (lead upto 100m)
as directed by the Engineer-In-charge.
Supplying of filling sand in foundation and over
areas including watering, ramming, consolidating
196 86 and dressing, labours, tools, taxes etc. all complete 0 0.00 0.00 0.00
as per the specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1
cement:3 sand: 6 stone agregate 40mm nominal
size) as levelling course in foundation and plinth etc.
including tempering, curring, shuttering etc.
complete all depth and height.
Supplying all materials, labour, T&P and providing
cement concrete (1:2:4) with 12m size hard broken
granite chips including watering, curing, conveyance
200 88 of all materials to worksite, payment of royalty, Cum 2.48 6127.74 15,209.05
taxes etc all complete as per specification and
direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying Reinforced
cement concrete of M-250 grade as per approved
designs and drawings having a minimum
compressive strength (in work test) 250 Kg. /
Square cm. in 15 cm. cubes at 28 days after mixing
and test conducted in accordance with I.S. 516
using 12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
201 89 washed sharp sand for mortar of approved quality 0 0.00 0.00 0.00
from approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be mixed
in concrete mixture with Portland slag cement
(PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering
and curing for 28 days, centering and shuttering
then after dismantling and removing debris from the
work site and finishing the exposed surface smooth
203 b) Wall Beam /Septic Tank Cum 5.60 13299.07 74,441.56
Supplying, straightening, cutting, bending, placing
in position and binding reinforcement steel work in
RCC/reinforced brick works as per drawing and
specification including preparation of respective bar
205 90 bending schedule and binding (Binding wire to be Qntl 8.44 10415.74 87,921.84
used as per the IS code) etc. all complete as per
direction of Engineer-In-Charge.Cold Twisted bars,
Thermo-Mechanically-treated bars.
206 0 Fly Ash bricks Masinary (1:6) (in F & P). 0 0.00 0.00 0.00
First class Fly Ash Brick masonry using F.A. bricks
of size 25 cm. x 12 cm. x 8 cm. having crushing
strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland
slag cement(PSC) and screened & washed sand for
mortar after immersing the bricks for 6 (Six) hours
in water before use in Foundation & Plinth including
splays cutting, circular moulding, corbelling,
chamfering and similar such type of works, watering
and curing etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials, cost
of all labour, scaffolding, sundries, T&P required for
the works etc. complete in all respect as directed by
the Engineer-in-Charge.
208 0 Brick work in inlet & outlet chamber Cum 1.20 5050.52 6,073.25
12mm cement plaster on internal smooth side of
RCC/brick surfaces with cement mortar of mix 1:4
209 92 (1 cement : 4 fine sand) including neat cement Sqm 42.29 169.57 7,170.61
punning & necessary scaffolding, curing etc. all
complete at all floors and all heights.
Providing 16mm. thick cement plaster in all floors at
all height with cement mortar of mix (1:6) with OPC
53 grade cement finished smooth to inside smooth
surface of brick masonry walls after racking out the
joints including watering and curing, rounding of
corners etc. complete with cost, coveyance, loading
210 93 and unloading, royalties and taxes of all materials Sqm 7.96 242.61 1,930.19
and cost of all labours, sundries, T&P and scaffolding
required for the work etc. complete in all respect as
desired by the Engineer in charge.
Supplying all materials,labour,T&P and
211 94 providing,Fitting & fixing 100mmx100mmx100mm Each 2.00 365.45 730.89
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supplying all materials,labour,T&P and making MS
212 95 STEP IRON IN 20MM diameter MS steel Each 5.00 208.03 1,040.17
Toilet Portion Civil Works
Supplying all materials, labour, T&P and providing
ceramic tiles in floors, treads and landing on 20mm
thick bed of cement mortar 1:4 (1 cement:4 sand)
joined with neat cement slurry mixed with pigment
to match the shades of the tiles including rubbing
and polishing complete as per direction of the
Engineer in charge. ( tile 600cmx600cm kajaria-
Fogparla or equivalent makel to be pre-approved by
the Engineer in charge)
Supplying all materials, labour, T&P and fixing
provide glazed tiles in dados skirting on 12mm thick
cement plaster (1:3) jointed with neat cement slurry
mixed with pigments to match the shades of the
215 97 tiles including rubbing and polishing complete as per Sqm 180.08 1189.44 2,14,188.41
direction of the Engineer in charge. tile 600x300cm
size kajaria-Duren marfil or equivalent make to be
pre-approved by the Engineer in charge)
Supplying of filling sand in foundation and over
areas including watering, ramming, consolidating
216 98 and dressing, labours, tools, taxes etc. all complete Cum 26.38 387.63 10,227.03
as per the specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1
cement:3 sand: 6 stone agregate 40mm nominal
size) as levelling course in foundation and plinth etc.
including tempering, curring, shuttering etc.
complete all depth and height.
Supplying all materials, labour, T&P and providing
cement concrete (1:2:4) with 12mm size hard
granite chips including watering, curing, conveyance
218 100 of all materials to worksite, payment of royalty, Cum 4.40 6127.74 26,945.20
taxes etc all complete as per specification and
direction of the Engineer in charge
Supplying all materials, labour, T&P and providing
Pidifin 2K including conveyance of all materials to
219 101 worksite, payment of royalty, taxes etc all complete Sqm 43.97 292.64 12,868.11
as per specification and direction of the Engineer in
Factory made single leaf solid WPC (wood polymer )
composite door shutter of 25mm thick compacted
with wood grain finish structural foam paner of
29mm thickness and a density of 20kg/cu.mtr shall
be used as core material for fitting the metal fittings
such as tower blits,aldrops, handles etc shall be
provided. A structural adhesive compatible with
(EPS) foam shall be used for bending the core
material ,The material and process for
manufacturing the door shutters shall confrom to RV-
220 102 TIFAC composites design centres standards and Sqm 22.68 4048.11 91,811.09
specification and the door shutters conforming to
relevant I.S. specification . The finish of door shutter
will be plain colour white /lvory/beige/light
grey/mahogany/Teak wood or any other colour
using high quality pigmments. Three heavy whight
mild steel butt hinges type-I (ISI marked) size
100mm are to be fitted on one side of shutter.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Factory made solid WPC door frame of size
95mmx55mm fabricated .The door frame consist of
four segments which are provided with plug-in-
socket arrangement in-situ in the mould. The
segments are plugged in and are joined together by
means of screw . The WPC frame shall be provided
with the material and process for manufacturing the
door frames shall conform to relavent I.S
Specification. the finish of door frame will be plain
colour white /lvory/Beige/light grey/Golden
brown/mahogany/Teak wood /sand
stone/Champagne/pastel blue of any other colour
222 0 Sub-Total of Plumbing Works 0 0.00 0.00 27,86,152.91
223 0 ELECTRICAL WORK 0 0.00 0.00 0.00
224 0 INTERNAL WIRING. 0 0.00 0.00 0.00
Recessed wiring to light point / first light of group
control/ call bell point/ exhaust fan point /wall fan
point with 1.5 sq.mm FRLSH PVC insulated single
core multistrand copper conductor of ISI marked in
20 mm dia non-metalic PVC conduit with 6 Amp,
250 V clip in type switch ISI marked and ceiling rose
ISI marked mounted on G.I modular box with face
plate & cover of suitable size , with 1.5 sq.mm
225 104 FRLSH PVC insulated single core multistrand copper 0 0.00 0.00 0.00
conductor as earth wire including all accesories and
connection as per direction of Engineer in Charge.
(Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
(Make of modular box,cover,switch & socket-
Legrand Myrios/schneider opale/Eq) With 10Years
Recessed wiring to secondary light point looped
from primary light point with 1.5sqmm FRLSH PVC
insulated single core multistrand copper conductor
of ISI marked with 20mm dia non-metallic PVC
conduit with 1.5sqmm FRLSH PVC insulated single
227 105 core multistrand copper conductor for running earth Nos. 30.00 639.56 19,186.80
including 3 plate ISI marked Ceiling rose with all
accessories & connection as per direction of
Engineer-in-charge. (Make of wire Finolex /Polycab/
Anchor / Havels/Eq) Average Length: 3 mtr
Recessed wiring to ceiling fan point with 1.5sqmm
FRLSH PVC insulated single core multistrand copper
conductor of ISI marked with 20mm dia non-
metallic PVC conduit with 6Amp 250V Modular
Switch,Stepped type Moudular Regulator, Base &
228 106 Cover with 1.5sqmm FRLSH PVC insulated single Nos. 50.00 2756.48 1,37,824.00
core multistrand copper conductor for running earth
including all accessories & connection as per
direction of Engineer in charge. (Make of wire
Finolex /Polycab/ Anchor / Havels/Eq) Group B
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Recessed wiring to Twin control light point with 1.5
sq.mm FRLSH PVC insulated single core multistrand
copper conductor of ISI marked in 20 mm dia non-
metalic PVC conduit with 6Amp, 250 V clip in type
2way switch ISI marked and ceiling rose ISI marked
mounted on G.I modular box with face plate & cover
229 107 of suitable size , with 1.5 sq.mm FRLSH PVC Nos. 2.00 2304.54 4,609.08
insulated single core multistrand copper conductor
as earth wire including all accesories and connection
as per direction of Engineer-in-charge. (Make of
wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
Recessed wiring for 5 / 6 amp socket outlet with
6Amp, 250 V clip in type modular switch ISI marked
mounted on G.I moular box with face plate & cover
230 108 of suitable size including all accesories and Nos. 33.00 988.84 32,631.72
connection on same switch board as per direction of
Engineer-in-charge.
Recessed wiring for 5 / 6 amp socket outlet with 2
x 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor of ISI marked in 20
mm dia non-metalic PVC conduit with 6Amp, 250 V
clip in type switch ISI marked mounted on G.I
moular box with face plate & cover of suitable size ,
231 109 with 1.5 sq.mm FRLSH PVC insulated single core Nos. 2.00 2059.10 4,118.20
multistrand copper conductor as earth wire including
all accesories and connection on separate board as
per direction of Engineer-in-charge.(Make of wire
Finolex /Polycab/ Anchor / Havels/Eq) Group C
Recessed wiring for 2 x 6 amp socket outlet
controlled by 2 nos 6Amp, 250 V clip in type
switch ISI marked mounted on single G.I moular
232 110 box with face plate & cover of suitable size Nos. 25.00 1957.62 48,940.50
including all accesories and connection on separate
board as per direction of Engineer-in-charge.
Recessed wiring for 6 pin 16 amp socket outlet
with 16Amp, 250 V clip in type switch ISI marked
mounted on G.I moular box with face plate & cover
233 111 of suitable size including all accesories and Nos. 5.00 1425.44 7,127.20
connection as per direction of Engineer-in-charge.
25Nos for Stage Light,3Nos For Aquaguard.
Recessed wiring for A.C/ Power socket outlet with
industrial type socket outlet, plug top and metal
chained cover in sheet steel enclosure ,20A/32A SP
234 112 MCB including all accesories and connection as per Nos. 8.00 1137.52 9,100.16
direction of Engineer-in-charge.
Recessed wiring to exhaust fan/Wall Fan point with
1.5sqmm FRLSH PVC insulated single core
multistrand copper conductor of ISI marked with
20mm dia non-metallic PVC conduit with 6Amp
250V Modular Switch, Base & Cover with 1.5sqmm
235 113 FRLSH PVC insulated single core multistrand copper Nos. 13.00 1569.40 20,402.20
conductor for running earth including all accessories
& connection as per direction of Engineer in charge.
(Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Recessed wiring for 3 x 6 amp socket outlet
controlled by 2 nos 6Amp, 250 V clip in type
switch ISI marked mounted on single G.I moular
237 115 box with face plate & cover of suitable size Nos. 1.00 1248.44 1,248.44
including all accesories and connection on separate
board as per direction of Engineer-in-charge.
Recessed wiring to submain in 4 x 10 sq.mm FRLSH
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 40 mm dia non-metalic heavy duty PVC conduit
239 116 1.6 mm thick along with 2 x 6 sq.mm FRLSH PVC Mtrs 45.00 929.84 41,842.80
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 6 sq.mm FRLSH
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 25 mm dia non-metalic heavy duty PVC conduit
240 117 1.6 mm thick along with 1 x 4 sq.mm FRLSH PVC Mtrs 170.00 377.60 64,192.00
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 4 sq.mm FRLSH
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 20 mm dia non-metalic heavy duty PVC conduit
241 118 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC Mtrs 350.00 285.56 99,946.00
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 20 mm dia non-metalic heavy duty PVC conduit
242 119 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC Mtrs 450.00 248.98 1,12,041.00
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 20 mm dia non-metalic heavy duty PVC conduit
243 120 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC Mtrs 150.00 218.30 32,745.00
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq) (For Switch Board
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supply and fixing of following way three pole and
neutral, sheet steel, MCB distribution, 415 V on
surface / recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, hinged front
acrylic cover for the MCB knobs detachable gland
plate, interconnections, phosphatized and powder
245 121 painted including earthing etc. as required wih 0 0.00 0.00 0.00
necessary MCB , RCCB / ISOLATORS as
required.Note for MCB- There should be colour
indication for tripping On ,Off & Trip/There should
be mid trip position for toggles for electrical fault
conditions.(With 5Years Warenty)
Supply, fixing, erecting, connecting and
commissioning of indoor type dust and vermin proof,
sheet steel clad ready made, double door horizontal
type powder coated wall mounted 4 way TPN
Distribution Boards For PDB suitable for 440 V, three
246 a) phase, 4 wire 50 Hz AC Supply complete with Nos. 2.00 14026.66 28,053.32
bottom detachable plate for interconnections etc as
below.Incommer 1 No-63A FP MCB (10KA)
Outgoings-10/20A SP MCB 10KA-12Nos.(Make-L&T/
Schneider/Legrand/Eq)
Supply, fixing, erecting, connecting and
commissioning of indoor type dust and vermin proof,
sheet steel clad ready made, double door horizontal
type powder coated wall mounted 12 way SPN
Distribution Boards For LDB suitable for 440 V, three
phase, 4 wire 50 Hz AC Supply complete with
247 b) bottom detachable plate for interconnections etc as Nos. 2.00 10694.34 21,388.68
below.Incommer 1 No-40A DP MCB (10KA)
Outgoings-10A SP MCB 10KA-10Nos.(Make-L&T/
Schneider/Legrand/Eq)
Supply & Laying of one number of PVC insulated and
PVC seathed / XLPE power cable of 1.1 KV grade of
3.5core 50 sq.mm direct in ground including
249 122 excavation , sand cushining protective covering and Rmt 70.00 559.32 39,152.40
refilling the trench etc. as required.(Make-
polycab/RR Kable/Rhino cable/Eq)
Supply & Laying of one number of PVC insulated and
PVC seathed / XLPE power cable of 1.1 KV grade of
3.5core 35 sq.mm direct in ground including
250 123 excavation , sand cushining protective covering and Rmt 40.00 472.00 18,880.00
refilling the trench etc. as required.(Make-
polycab/RR Kable/Rhino cable/Eq)
Supply & Laying of one number of PVC insulated and
PVC seathed / XLPE power cable of 1.1 KV grade of
251 124 4 core 16 sq.mm Aluminium on surface as Rmt 35.00 370.52 12,968.20
required.(Make-polycab/RR Kable/Rhino cable/Eq)
252 0 END TERMINATION 0 0.00 0.00 0.00
Supplying and making end termination with brass
compression gland and aluminum lugs for following
253 125 size of PVC insulated and PVC sheathed / XLPE 0 0.00 0.00 0.00
aluminum cable of 1.1 KV as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supply, installation,testing & commissioning of floor
mounting front operated front access extensible
type cubicle panel totally enclosed, dust and vermin
proof with IP-42 /55 protection with hinged and
lockabale doors.CRCA sheets including
interconnections,tinned copper crimping lugs,
bonding to earth and painting suitable for use at
415 V, 3phase 4 wire 50 Hz system, and to
withstand a fault level of 35 KA symmetrical for 1
sec at 415 V complete as per specifications, as
258 126 required and as below : All switchboards shall have 0 0.00 0.00 0.00
provision for entry of cables from the bottom as
required. All live accessible parts shall be shrouded
and all equipment shall be finger touch proof. The
bus bars shall be insulated with heat shrinkable
sleeves.SMC/DMC shrouds and busbar supports
shall be used with Indication lamp, C.T , Digital
Voltmeter, Digital Ammeter and control fuse etc.
complete.MAKE- Legrand / Schneider/
L&T/SIEMENS/Eq.
MAIN PANEL with 100A 4P MCCB 25KA -1 No as
incomer,125A 4P C.O. SWITCH 1Nos,63A 4P MCB
259 127 10KA 4Nos.63A 4P C.O. SWITCH 1Nos, 40A DP MCB set 1.00 128000.50 1,28,000.50
10KA 3Nos, with E.C Busbars with 4nos 65KA VSD
along with 4nos 32A SP MCB.
EXT Light DB with 63A 4P MCB (10KA) -1 No as
incomer, 1Nos Timer Switch ,20A SP MCB 10KA-12
260 128 Nos, 20A DP MCB 10KA 6Nos. as Outgoing with E.C set 1.00 32243.50 32,243.50
PUMP Panel Board with 63A 4P MCB (10KA) as
Incomer , Outgoings-32A 4P MAB 10KA-2Nos, 20 A
261 129 DP MCB 10KA-3Nos, with E.C Busbars. set 1.00 24335.14 24,335.14
Earthing with copper earth plate 600 mm x 600mm
x 3.15 mm thick ISI marked including accessories
263 130 and providing masonary with cover plate having Set 2.00 13212.46 26,424.92
loccking arrangement and watering pipe etc with
charcoal and salt as required.
Supplying and laying 25 mm x 6 mm CU earth strip
ISI marked at 0.5 meter below ground level as strip
264 131 earth electrode including soldering etc. as required. Rmt 35.00 1262.60 44,191.00
Supplying and laying 25 mm x 6 mm CU earth strip
ISI marked on surface or in recess for connection
etc as required.
Providing and fixing 8 SWG CU wire on surface or in
266 133 recess for loop earthing as required. Rmt 100.00 140.42 14,042.00
267 134 Lightning Protection System. 0 0.00 0.00 0.00
268 (a) Supply & fixing of lightning arrester ABB ESS Type. Nos 1.00 370971.94 3,70,971.94
Earthing with 50mm dia 3mtr long cupper With
269 (b) 2nos compoung (25kg) as required . Set 2.00 17110.00 34,220.00
Supply, Installation, Testing and Commissioning of
pre-wired fluorescent fiiting / compact fluorescent
fitting /LED fitting of all sizes complete with all
accessories and lamp etc. directly on ceiling /wall or
recessed in false ceiling , including connection with
1.5 sq.mm FR PVC insulated single core multistrand
copper conductor and earthing as required.Make-
Bajaj/philips/wipro/JAQUAR/Eq.With 5Years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Ceiling mounted indoor type 24w batten type LED
Ceiling/ Wall mounted type 10w BULK HEAD
Supply, Installation, testing and commissioning of
Supply, Installation, Testing and Commissioning of
ceiling fan 1200mm sweep USHA ENERGIA,
including wiring the down rods of standard length
(upto 30 cm) with 1.5 sq.mm FR PVC insulated
single core multiatrand copper conductor etc. as
Supply, Installation, testing and commissioning of
exhaust fan of 230 mm sweep AEROCLEAN LD GBD
900 rpm in the existing opening, including making
276 137 the hole to suit the size of the above fan, making Nos 13.00 1867.94 24,283.22
good the damage complete, connection, etc as
Supply & fixing of 15W LED Down Light
(Surface/Recessed)
Supply & fixing of LED 36w 2'x2' Surface/Recessed
Supplying and fixing of clip in type modular
Telephone socket ISI marked mounted on G.I
280 140 modular box with face plate & cover of suitable size Nos 4.00 450.76 1,803.04
,including all accesories and connection as per
direction of Engineer in Charge.
Supplying and fixing of clip in type modular T.V.
antenna socket ISI marked on mounted on G.I
modular box with face plate & cover of suitable size
, including all accesories and connection as per
direction of Engineer in Charge.
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC
insulated coper conductor, unarmoured telephone
282 142 cable in existing surface / recessed PVC conduit as Rmt 100.00 53.10 5,310.00
Recessed wiring to television point with cable RG-6
grade, 0.7 mm solid copper conductor PE insulated
shielded with fine tined copper braid and protected
283 143 with FR PVC sheath in in existing surface / recessed Rmt 50.00 47.20 2,360.00
PVC conduit as required as per direction of Engineer
Supplying and fixing of following sizes PVC conduit
along with accessories in recessed wiring including
284 144 cutting the wall and making good the same in case 0 0.00 0.00 0.00
of recessed conduit as required.
Supplying and fixing of 16 / 18 SWG metal box of
200 mm x 150 mm x 60 mm deep on surface /
recess with suitable size of phenolic laminated sheet
286 145 cover in front including cutting the wall and making Nos 4.00 212.40 849.60
good the same in case of recessed conduit as
( Tel junction Box)
Supplying & Commissioning of Telephone Hand Set.
Supplying & installation of 10 pair KRONE make
moudles with locking & key arrangements fabricated
288 147 with MS sheet & powder coated to be fixed on set 1.00 1098.58 1,098.58
concealed manner incl. good the damages.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
289 1 SAFETY EQUIPMENTS 0 0.00 0.00 0.00
Supply and installation of Rubber Mats 12mm thick
290 148 of size 2000mm x 1000mm x 12 mm thick Electrical Nos 4.00 4130.00 16,520.00
tested with test certificate.
Supply and fixing of fire buckets with angular
fabricated stand to fix 4 buckets in each stand for
Electrical fire protection as per standards of
Electrical Inspectorate.
Supply and fixing of Co2 fire extinguisher with
292 150 mounting clamps with pressure test certificate . Nos 6.00 8850.00 53,100.00
Supply and fixing of shock treatement charts duly
laminated along with separate colour single line
diagram laminated, to be fixed in Electrical control
Supply and fixing of first aid box with medicines
294 152 complete with medicine with three years expiry date set 1.00 1770.00 1,770.00
to be fixed in Electrical control panel room.
EXTERNAL ELECTRICAL/SUBSTATION WORK
Supply of all Materials, Labour and Stringing of 11
KV Overhead Line with, 55 mm2 Insulated
Aluminum Conductor, on 100 X 116 mm RS Joist 10
Mtrs. long complete with required Insulators, Cross
Arms, Stays Set complete as per site requirement
and Direction of Engineer-In-Charge.
298 B. 63 KVA 11 / 0.4 KV OUTDOOR SUBSTATION 0 0.00 0.00 0.00
Supply, Erection & Testing of 10.0 Mtrs. Long 116
mm X 100 mm Joist Pole with 400 X 400 X 6 mm
Base Plate to be used as Substation of Double-Pole
Structure support including excavation of Pole Pit in
all kinds of Soil, PCC Base Padding, Back Filling of
299 154 the Pit with 1:3:6 PCC, Painting with two coats of Nos. 2.00 23600.00 47,200.00
Red oxide Primer and two coats of Aluminum Paint,
Construction of Brick Masonry, Cooping, fixing of
Danger Board etc. complete as required.
Supply and Erection of Structure Materials on
Existing Pole supports made out of fabricated M.S.
Channels, Angles etc. as per the approved Drawing
including cost of Clamp, Nut Bolts, painting with 2
coats of Red Oxide Primer and 2 coats of Aluminum
Paint complete as required for the proposed Four
Pole Structure.
Installation, Testing and Commissioning of 63 KVA,
Supply, Erection and Testing of 11 KV 400 Amp.
Horizontal Gang Operated A.B. Switch on Existing
302 157 Double Pole Structure including cost of GI Pipe Set 1.00 8850.00 8,850.00
operating Handle of appropriate Length, Nut Bolts
etc. complete as required.
Supply, Erection and Testing of 11 KV 400 Amp.
Horizontal Gap Fuse on Existing Double Pole
303 158 Structure including cost of Nut Bolts etc. complete Set 1.00 5310.00 5,310.00
Supply, Erection and Testing of 12 KV Lightning
Arrestor on Existing Double Pole Structure including
304 159 cost of mounting arrangements, Nut Bolts etc. Set 3.00 1062.00 3,186.00
complete as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supply and Jumpering of 55 mm2 Insulated
Aluminum Conductor including cost of Jumpering,
305 160 Binding with Insulators etc. complete as required. Mtrs. 100.00 112.10 11,210.00
Supply of all Materials, Installation & Testing of 3
Mtrs. long 50 mm Diameter Class–B perforated GI
Pipe Earth Electrode confirming IS:3043 including
cost of Salt, Charcoal, Masonry Enclosure, C I Cover,
306 161 Watering Funnel, Labour Charges for excavation of Nos. 4.00 4130.00 16,520.00
Pit in all kinds of Soil complete as required (For
Body, Lightning Arrestor & DP).
Supply of Materials and Installation of Safe Earth
Electrodes (Chemical Earthing) including cost of
307 162 Electrode, Earthing Compound, Excavation of Nos. 3.00 17700.00 53,100.00
Earthing Pit, Refilling, etc. as required (For Neutral).
Supply of Materials and Laying Underground / Floor
/ Wall including making End Termination and testing
of following sizes of G.I. Earthing Conductor
308 163 Earthing of Equipment's, Switch Boards and Panels 0 0.00 0.00 0.00
as required complete as per Direction of Engineer-In-
Supply of Materials and laying Underground / Floor /
Wall including making End Termination and Testing
of following sizes of Copper Flat for Loop Earthing of
Equipment’s, Switch Boards & Panels as required
complete as per Direction of Engineer-In-Charge.
314 C. PANEL BOARDS & DBS: 0 0.00 0.00 0.00
Supply, Installation and Testing of L.T. Outdoor /
Indoor Floor mounted type Distribution Boards made
out of 2 mm thick CR Sheet Metal Cubicle, duly Acid
treated for Derusting, Premiered and painted with 2
coats of Enamel Paint of approved shade; Dust,
Damp and Vermin proved; having Hinged Door and
Compartmental Arrangement for each equipment
and Busbar Chamber on the Top of the Panel
running horizontally; having provision for Cable/
Conduit Entry, Earthing Studs as per specification
mentioned below duly factory wired conforming to
the relevant ISS and as per special conditions of
contract making good the damages caused complete
as per the Direction of Engineer-In-Charge.
316 (a) Outdoor Sub Station Panel 0 0.00 0.00 0.00
Incoming: 1 No. 160 Amp. 4P MCCB - 50 KA (MPR).
318 0 Equipment:3No.R Y B LED indicator. 0 0.00 0.00 0.00
319 0 Bus bars: 4 Nos. 200 Amp. Aluminum Busbar. Set 1.00 59000.00 59,000.00
Supply of all Materials, Installation & Testing of 3
Mtrs. Long 50 mm Diameter Class–B Perforated GI
Pipe Earth Electrode confirming IS:3043 including
cost of Salt, Charcoal, Masonry Enclosure, C I Cover,
321 166 Watering Funnel, Labour Charges for Excavation of No 2.00 4130.00 8,260.00
Pit in all kinds of Soil complete as required (For
Body Earthing of Panel Board & DB - 6 Nos. & for
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Sub Description of Item
Unit Qnty. Rate Amount
Supply of Materials and Installation of Safe Earth
Electrodes (Chemical Earthing) including cost of
322 167 Electrode, Earthing Compound, Excavation of No 2.00 17700.00 35,400.00
Earthing Pit, Refilling, etc. as required (For Lightning
Protection System).
Supply of Materials and Laying Underground / Floor
/ Wall including making End Termination and testing
of following sizes of G.I. Earthing Conductor for Loop
323 168 Earthing of Equipment's, Switch Boards & Panels as 0 0.00 0.00 0.00
required complete as per Direction of Engineer-In-
Supply of Materials and Laying Underground / Floor
/ Wall including making end termination and testing
of 8 SWG G.I. Wire for Loop Earthing of
Equipment's, Switch Boards & Panels as required
complete as per Direction of Engineer-In-Charge.
326 E. SAFETY EQUIPMENT'S: 0 0.00 0.00 0.00
Supply and hanging of Shock Treatment Chart duly
Supply & Laying of 8 mm Thick Rubber Mat, ISI
mark of 1100 V Grade.
Supply and Installation of 3 Nos. Fire Buckets on a
Mild Steel Stand complete as per specification and
329 172 requirement of Fire Safety Provisions. Set 2.00 1770.00 3,540.00
Supply and Installation of 5 Kgs. Capacity CO2 type
330 173 Fire Extinguisher complete as required. Set 2.00 5310.00 10,620.00
331 174 Supply and Installation of 440 Volt Danger Boards. Nos. 4.00 141.60 566.40
332 175 Supply and fixing of 100 mm dia GI Pipe. Mtrs. 12.00 708.00 8,496.00
333 Sub-Total of Electrical Works 26,70,965.40
334 Grand Total 2,01,78,805.60
334 Grand Total 2,01,78,805.60
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ BOL 002 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Bolangir PHC at Kusanga of Loisingha.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .