REPAIR TO BRICK WORK, WALL PLASTERING, BENCHING, DRAINAGE AND OTHER CONNECTED B/R WORKS AROUND RUNWAY AND DISPERSAL AREA UNDER AGE (I) CIF (K).

Amount

Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on stone masonary surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

M&L Stone wallimg of random rubble, uncoursed, well bounded, bedded and solidly hearted built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 6 above but except stone.

Plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50 metres clear span, steps, seismic and other similar bands, coping, benching ,bed plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge.

Dismantiling of worught iron or mild steel work of any description not otherwise provided for complete all as spd and directed.

Frame work such as grills,gate and intricated design incl MS angle,MS channel,flat iron, rounded bars,MS plate etc with ends of bars shouldered and or riveted or forget in to spikes incl welding as directed and fixed with screws, bolt etc incl dismantling of existing gate/grill conformimg to Fe 290,Gde E-165 complete all as specified as directed by the Engineer-in-Charge.

Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed.

Demolition and breaking up of drain pipes 300mm bore (Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and as directed by Engineer-in-Charge.

M&L for 300 mm bore reinforcement concrete pipe, Class NP3, laid in trenches and jointed in CM 1:1 and tested on concrete bed or directly on hard grounds, jointing and testing, complete, all as specified and as directed by Enginee-in- Charge. Note:- Excavation, earth work and concrete bed shall be measured and paid for separately under respective items of this BOQ.

Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes 300mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.

S&F 1.0 mm thick steel rolling shutter, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type including dismantling complete all as specified and directed by Engineer-in-Charge.

S&F ball bearing for rolling shutters, complete all as specified and directed by Engineer-in-Charge.

S&F safety lever locks mild steel with 4 levers for rolling shutter, complete all as specified and directed by Engineer-in-Charge.

Note :- An amount of Rs 32,200.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S B A Traders (BID ID -3194254)

M/S TARIQ AMIN LONE (BID ID -3183987)

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3194221)