Retrofitting and Major Repairs and Maintenance to the Existing Community toilet at Ward No 08 Lamba Colony in Ranipet Municipality

Amount

Earth work excavation and depositing on bank with an intial lead of 10m and lift of 2m in hard stiff clat,stiff black cotton, hard red earth, shales, murram,gravel stoney earth and earth mixed with small boulders and hard gravelly soil and as directed by the officers.

Supplying and delivery of PVC pipe 110mm PVC pipe including all cost conveyance of materials and labour charges etc. complete as per standard specifications

Supplying and delivery of PVC specials including all cost conveyance of materials and labour charges etc. complete as per standard specifications 110mm PVC Tee

110mm dia PVC. Door Elbow

Laying of 110mm PVC pipe as specials in the trenches and laying to proper grade and aligment and jointing with PVC coupler including all cost conveyance of materials and labour charges etc. complete as per standard specifications

Supply and Delivery Fabrication of 0.75 m x2.10 m MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Supply and fixing of Indian water closet with new glazed earthern ware Indian water closet of 22” Oriya type of approved quality & approved colour with “P” or “S” trap with sand cushion and forming flooring around the water closet using 40mm size broken brick jelly in cement concrete 1:2:4 of 4” thick and plastering with cement motar 1:3 20mm thick using river sand including fixing the water closet in position and giving necessary connection to CI stacks etc. complete including cost and conveyance of all materials and all labour charges etc.complete complying with standard specification and as directed by the departmental officer etc. complete.

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5 A.F.T switch, covered with hylum sheet etc., Complete as per standard specification.

Supply and Fixing of 4' 18W Crystal Glass LED Tube Light Fitting etc., Complete as per standard Spec:

Supply and delivery of New Open well Submersible pump set conforming to IS 14220/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersiable cable to a length of 15m with necessary cable joints. The non-return value located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (+5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL uptp 5 HP, fully Automatic Air Break star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continous operation. (LPM150x120Head) TWAD 2019-2020 As per IS 14220/2002, SI No:29.

Supply and delivery of direct online starter confirming to IS13947 and IEC 60947-1 suitable KW rating for operation in AC/ singlePhase/ 50HZ(±5%) and 230V(±10%) including Ammeter,Voltmeter,Thermal Overload relay, 16Amps 2pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5way connector, wiring with 1sq.mm/1.5sq.mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be takenseparately).

Supply and delivery of (PVC) specials 32mm dia PVC Elbow

32mm dia PVC Pipe

PVC screw down tap Heavy type 15mm dia

Supply and delivery of Septic Tank Cleaning etc., including cost of all materials and labour charges etc., Complete as per standard specification.

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with ocking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. (0.75 m x2.10 m)

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Supplying and fixing in position 32 mm first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

Provision for Rain Water Harvesting

Provision For Name Board Writing

Supply and delivery of Sanitary Napkin Incinerator of burning capacity of 200 pads per day. Etc., Complete as per standard specification

R Selvarani (BID ID -1197811)