Water Supply Fund 24-25-Supply delivery and Laying of HDPE Pipe and Erection of Submersible motor , Starter Board With Water supply arrangements at ward no 29 Sanarpalayam Arunthathiyar street, Avarangadu in Tiruchengode Municipality.

Amount

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for layingof pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil.SS20B

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Supply delivery and fixing of (four pole 63A,10KA) Miniature Circuit Breakers 240v/415v 50HZ-AC Supply suitable for Both lighting and motor circuits.Legrand/Hager etc complete.,

Supply delivery and fixing of 63 Amps Porcelain Fuse Unit (500V) (Anchor/Equivalent) etc complete.,

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains etc. ( SD 67)

Supply,delivery and fixing of Earth set, earth link 1"x1/8" flat with bolt nut accessories etc complete.,

Supply delivery and fixing of MS box of 30 cmx20cmx l0cm with angle iron frame work for housing the condensor, choke fuse unit SP switch with lock and Key arrangements. SD 98

Supply delivery and fixing of TW Plank of size 600mmx450mmx19mm with supporting reepers of 1" thick on both side with painting and with bolt and nut and washer etc complete.,

Supply delivery and fixing of MS BOX For size 150 x 100 x 75 mm 4/3 Pole MCB With proper shape and fitting arrangements,and including all labour charges etc complete.,

Supply delivery and fixing of 2.5 sqmm PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 including all labour charges etc complete.,

Towards the charges for Removal of deep well hand pumps from borewell Above 40 m etc complete.,

Supply and delivery and fixing of 1000 litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002(SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD) and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %

3 HP Submersible Motor(20LPMx150M)

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 (THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD) as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

5 HP Submersible Motor(75LPMx100M)

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection ofpanel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.Upto 5HP Submersible mpotor. TWAD 2024-25

Upto 5 HP

Above 5.00 HP to 10.00 HP

Supply and delivery of Following GI Pipes and Specials With relevant IS Standards and conforming to IS 1239 / PART I /90 Including all labour charges etc complete as per standard specifications.

1" GI Pipe (25mm dia)

11/4 " GI Pipe (32mm dia)

11/2 " GI Pipe (40mm dia)

50mm dia UPVC Column Pipe

40mm dia UPVC Column Pipe

25mm Ø (1" GI Coupling )

25mm Ø (1" GI Bend )

25mm Ø (1" GI Elbow )

40mm GI Coupling

40mm GI Bend

40mm GI Elbow

32mm GI Coupling

32mm GI Bend

32mm GI Elbow

90mm HDPE Pipe

Laying of GI / HDPE Pipes and Specials to proper line and level including jointing but excluding cost of Pipes and jointing materials for plumbing works for providing water supply arrangements etc.,complete.

15 mm to 40 mm dia GI Pipe

50 mm to 65 mm dia GI Pipe

90mm HDPE Pipe

50mm to 75mm dia PVC pipe

Refilling with excavated sand complying with standard specification for filling in foundation and basement.

add GST 18%

Shanjiv Infra Project (BID ID -1163899)