Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹29.4 L+₹1.2 L (4.44%)Rejected-Finance NO 94 OLD NO 100 19TH MAIN ROAD 1ST N BLOCK RAJAJI NAGAR BANGALORE 560 010 | BANGALORE | BANGALORE | KARNATAKA | 560010 | L2 | Rejected-Finance Not being lowest and reasonable | |
| 3 | Rejected-Technical NO 390 MARGONADANAHALLI RKM LAYOUT NEAR OCEANUS TRANQUIL APARTMENT KR PURAM BENGALURU 560036 | BENGALURU URBAN | KARNATAKA | 560036 | - | Rejected-Technical NOT HAVING ELIGIBLE CRITERIAL, HENCE REJECTED |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
23 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I R nd D WEST BANGALORE
GARRISON ENGINEER I R nd D WEST BANGALORE, DRDO COMPLEX, CV RAMAN NAGAR
REPAIR REPLACEMENT WORKS TO LIFT PANELS ARDs AND CONNECTED ITEMS UNDER GE I R AN D WEST BANGALORE
2023_MES_605692_1
GE(I)/R ND D/BAN/TOKEN/39 OF 2023-24 8192/E8
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER I R nd D WEST BANGALORE
CLASS AND CATEGORY AS PER NIT
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I R nd D WEST BANGALORE
₹52,000
31 Oct 2023
30 Jun 2023
29 Aug 2023
1 Jul 2023
23 Aug 2023
10 Aug 2023
1 Jul 2023 - 15 Jul 2023
Amount
Repairs/Modernization of existing OTIS lifts, 884 Kgs @1 Mtr/sec speed (G+2 floor) by using repair/replacement of the existing lift shaft, main motor, gear box, car frame ,counter weights, governor, brake, guide rails and handing over in satisfactory working condition with the same capacity ,speed and operation including testing and commissioning after repairs and replacement of the parts/accessories specified in the succeeding items all as recommended by the OEM and as directed by Engineer-in-charge. Notes:- (i) The tenderer shall visit the site and inspect the lifts thoroughly to ascertain the repairs and replacement required for smooth functioning of the lifts, before quoting their rates. The OEM recommendations in this regard may be taken into consideration. (ii) However the decision of the Engineer-in-charge regarding repairs or replacement of the mentioned accessories shall be final and binding. (iii) The makes of components and accessories other than specified shall match the existing components makes or as per OEM recommendation and approved by the Engineer-in-charge.
S&F Microprocessor based LSVF closed loop controller with VVVF drive unit for existing duty load, suitable sensor, speed stops and simplex full collective operation with incorporation of features like, ARD, energy efficiency ,non fire lift enclosure meeting with the standards of EMC (Electro magnetic compatibility),Automatic by-pass, overload device, automatic bell/buzzer, anti nuisance. New reference system in hoist ways suitable for the new LSVF controller including magnets ,cams and limit switches with mounting accessories and protection complete all as specified and as directed. Make:- (i) Controller- MABARA/INLV/ADCO/MONARCH/OEM recommended. (ii) Main Drive- FUJI/TOSHIBA/DELTA . (iii)Microprocessor-Mabara/ADCO/OEM recommended. (iv) Sensor- TI Jones/Weco/OEM recommended.
S & F Stainless steel lift car cabin as follows:- i)Car roof, provided with a car top rail / balustrade and suitable warning notice for fall hazard. ii) Car cabin enclosures and false ceiling match with existing size, capacity with Stainless Steel finish, flooring with PVC texture. Design as approved by Engr-in- Charge. iii) Noiseless pressure fan or blower provided in lift cabin with supply grill matching with the interior of the cabin. iv)Recess mounted LED lighting and in addition to normal lighting and emergency light to illuminate the car for minimum 30 minutes in case of power failure. v) Hand rails fabricated with polished stainless steel sections at a height & locations suitable for physically challenged passengers. vi) Overload panel along with audio / visual direction. vii) Door hold button, which extends normal door open period by up to 30 seconds. The extended time can be cancelled by actuation of door close button. viii) Stainless Steel mirror finish scratch resistant cabin enclosure at least one third of the size at middle portion on rear panel throughout the height of the cabin. Make:- Genesis/Wittur/Techno Doors/Mass Punching
S & F landing doors complete with headers, sills, frames etc. as required and entrances for lifts protected by automatic power operation, centre opening with car (SS), single kin construction all as per IS and OEM recommendation. Make:- Genesis/Wittur/Techno Doors/Mass Punching/Stalwart
S & F Car doors with operating systems as follows:- i) Positive acting door drive powered by an A.C. motor rigidly connected to the door and controlled by a VVVF unit and simultaneously open the car and landing doors and maintain the doors fully open or closed at each landing (G+2 floor), suitable for Attendant /Automatic operation and smooth opening of door without jerk and closing of door without any banging noise, mounted on steel members forming part of the car sling. ii) A multiple beam full height infrared electronic door detector to regulate the closing motion of the doors for entry of the passengers. iii) Each landing door (PAX PRIMA), to be provided with an interlock, to prevent movement of the car away from the landing until the doors are locked in the closed position with an electric contact for the door to prevent car movement away from the landing unless the door is in fully closed position. iv) The car and the landing doors are to be provided with two point suspension sheave type hangers complete with tracks, Sheaves and rollers of steel with moulded nylon collar and shielded ball bearings and the tracks of suitable steel section with smooth surface. Make:- Genesis/Wittur/Techno Doors/Mass Punching/Stalwart
Material and labour for disconnecting and removing main motor drive lift machine unit complete from the foundation and transporting to workshop for complete overhauling by replacing the Thrust plate bearing, Pedestal bearing, Motor bush bearing , Oil seal , varnishing of winding, complete painting with two coats of enamel paint over one coat of red oxide primer and taken back to the site for reinstallation and testing complete all as specified and directed by Engineer-in-Charge.
Supply and fix Driving sheaves, governor and suspension ropes as follows:- i)Self lubricated, round standard steel wire ropes manufactured from high grade steel and special flexible material matching with the existing number and size of the hoist way ropes with the existing driving sheaves 730 dia 4 groove 13mm dia rope having the combined breaking strength calculated with factor of safety, including replacement of driving sheaves, Brake Drum and replacement of worn out parts if any as per site requirement. ii) The end of the lift ropes, properly secured to the car and counter weight hitch plates as the case may be with adjustable rope shackles having individual tapers Babbitt sockets, and with a suitable shackle spring, seat washer, shackle nut & lock & shack nut split pin or any other suitable arrangement. Make of steel wire rope- Usha Martin/ South India Rope /OEM recommended.
S & F Voice Synthesizer , fully programmable interface, digital type capable of site programming, giving a choice of background music (with option at site to choose or reject) and capable of providing arrival at the floor & its designation (floor numbers) messages in English language.
S & F New hoist way harness and travelling cables suitably suspended to relieve strains in individual conductors suitable for new LSVF closed loop controller and fixtures, run from a junction box on the top of the car to a junction box located in the shaft bear mid-point of travel and from these junction boxes conductors run to the various locations. Travelling cables shall be provided for signals, controls, lights, fans, alarm bell, emergency circuit and music etc. and 10 percent of the total capacity. The size and type of cables shall match the existing cables or as per OEM recommendation and as approved by Engineer-in-charge. Make- Micro Therm/Finolex/Havells
Supply, fixing and testing in replacement of ARD (Automatic Rescue Device ) 15 to 20 KW 3-phase in lift control panel as per existing for eectrically operated lifts incl necessary connections and testing all as specified and directed MAKE :
Supplying, fixing, commissioning, installing PIT LADDER & SWITCHES with following accessories and devices complete all as specified and directed by Engr-in-charge. (i) Fixed MS pit ladders between the bottom landing and the pit floor, safe from all falling hazards. (ii) Two pit stop switches, with mushroom red head (it shall be locked off when pushed and reset manually) one at bottom landing level in the shaft & the other on the pit (First stop switch shall be accessible from the lower landing on opening of the landing door and the second switch from the pit floor), which, when in the STOP position, shall prevent any movement of the lift car including movement during inspection operation, until both the switches are set in the run position. (iii) Terminal limit switches, to slow down and stop the car automatically at the terminal landings, and final limit switches, to automatically cut off power should the car travel beyond the terminal landings. (iv) Fireman switches at lobby floor. Make- Purvi/Mabara/OEM recommended
Supplying and fixing in replacement, CAR OPERATING PANEL (Feather Touch) Flush type Stainless Steel “Car Operating Panel” with the following devices :- i) Bank of call buttons corresponding to landings served. Tactile Braille LED illuminated buttons and tonal contrast to the COP & car panels. ii) Alarm button, provided to indicate the alarm button provision, Door open and close button, The main floor /exit floor push button, protruded 5mm beyond the other floor buttons. iii) Fan/blower switch, “Up” & “Down” direction indicators indicating travel direction, Key operated switch for “Attendant” and “Automatic” operation. iv) Overload panel along with audio/visual indication. v) 7 Segment type LED based digital car position indicator with LED/ illumination indicating the landing at which the car is stopped or passing. vi) Hall buttons combined with digital position indicator with SS hairline finish face plate suitable for simplex full collective operation at lobby floor of all landings (B+G+4 floor) . Make:-Purvi/Mabara/Mass Punching/Stalwart/OEM recommended
Supply and fixing in replacement, Landing operating panel (Feather Touch) Flush type stainless steel complete all as specified and directed by Engr-in-charge
Supply and fixing 3mm thick coloured ACP (aluminium composite panel) sheet of make as approved by GE, for cladding fixed to MS frame work including filling joints as per manufacturers and Engineer-in-charge instructions carrying out the work upto 15 meter height including necessary scaffolding and including demolition of existing ACP sheet complete all as specified and directed.
Man Elevators Company Pvt Ltd
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .