Maintenance work (Surface dressing, Jungle Cleaning, Drain Cleaning, Road marking, Painting and others Miscellaneous work) for three years of Sector Delta-II Greater Noida.Maintenance work (Surface dressing, Jungle Cleaning, Drain Cleaning, Road mark

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.

All kinds of soil DSR-13/2.28.1/P-75

Cleaning jungle including uprooting of rank vegitation grass brush wood trees and samplings of girth upto 30 cm measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 m out side the periphery of area cleared. SOR-20/259(i)

Same as above 259(i) above but grass only. SOR-20/259(A)

Tractor with trolly including Pol & driver SOR2020/SIN19

Supply of labour. SOR2020/SIN12

Cartage of earth or fly ash when added to schedule item no. 253 Iind Km. and Beyond. SOR-20/261(c)

Supply and fixing SFRC Cover chamber (with out frame ) 50mm thick. 600 X 600 mm medium duty

Supply and fixing SFRC Cover chamber ( with frame ) 50mm thick.600 X 600 mm heavy duty

Supply and fixing SFRC Cover chamber (with out frame ) 50mm thick. 900 X 600 mm medium duty

Supply and fixing SFRC Cover chamber ( with frame ) 50mm thick.900 X 600 mm hevay duty

M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-20/303

Same as item no. 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. SOR-20/305

Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar.

12 mm Thick cement plaster 1:6 ( 1 cement : 6 course sand dsr/2018-13.4.2

Excavating hole more than 0.10 cum and upto 0.5 cum including getting out the excavated soil then returning the soil as required in layer and not exceeding 20cm in depth including consolidation each deposit layer by ramming watering etc. with disposing of surplus earth as direction with in a lead of 50m lift upto to 1.5m all kind of soil.DSR/2018/2.30.1

Supply and Fixing R.C.C. Direction board size 200x510x80mm mixing 1:1.5:3 including reinforcement all complete for completion of the work as per direction of engineer-in-charge.AR/GNIDA

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SOR-20/280/5.4.2

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of al materials labour, Tools & plants etc required for proper completion of the work. Paint to be used should confirm ISI no 105/106/133-1950. SOR 2020/si-647

Painting letters up to 2.5cm, size including supply of all materials, labours & tools and plants ete required for proper completion of the work. SOR-20/817

As in item 817 above 8 cm, but up to 15 cm, SOR-20/819

Painting border line upto 2.50cm to 5.00cm wide SOR-20/836(b)

Steel work welding in bulit up section/framed work including cutting , hoisting, fixing in position and applying a priming coat of approved steel etc. as required. In gratings , frames ,guard bar, ladder, raillings brackets , gates and similar works.DSR/2018/10.25.2

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railling, staircase railling and similar works, including applying priming coat of approved steel primer. G.I . PipeDSR/2018/10.26.3

Excavation in foundation ordinary soil( Loam,clay or sand) including Lifts upto 1.5m and lead upto 30m and cluding filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surpluse earth as directed by the engineer incharge upto distance of 30 m from the foundation trenchess.SOR-2020/251a

0.0 to 1.5m below g.l. FOR PIPE DRAIN

Supply of ISI market RCC NP-2 pipes of following size including carting loading unloading at godown including all taxes and levies & rubber rings.GNIDA/AR

300 mm.NP-2 dia. RCC Pipes

350 mm.NP-2 dia. RCC Pipes

400 mm.NP-2 dia. RCC Pipes

450 mm.NP-2 dia. RCC Pipes

600 mm.NP-2 dia. RCC Pipes

Providing and laying in position cement concrete 1:4:8 (1cement:4coarse sand:8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of folling diameter including centring shuttering but excluding excavation. GNIDA/AR

300 mm.NP-2 dia. RCC Pipes

350 mm.NP-2 dia. RCC Pipes

400 mm.NP-2 dia. RCC Pipes

450 mm.NP-2 dia. RCC Pipes

600 mm.NP-2 dia. RCC Pipes

Laying of NP-2 RCC S&S pipes jointed with stiff mixture of cement mortar in the propertion of 1:2 (1Cememt:2Coarse sand) including testing of jointed complete GNIDA/AR

300 mm.NP-2 dia. RCC Pipes

350 mm.NP-2 dia. RCC Pipes

400 mm.NP-2 dia. RCC Pipes

450 mm.NP-2 dia. RCC Pipes

600 mm.NP-2 dia. RCC Pipes

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Dsr-13/18.36

Hiring of Portable Re-cycle jetting cum suction machine mounted on Mahindra volero maxi with hydraulically operate Man-Hole De-silter upto depth of 15 Meter with driver for the area of Gr. Noida. As directed by Engineers in- Charge for 8.50 hours perday overtime will be paid on pro-rate basis. pressure 3000PSI (Min) with 15 mtrs suction head and jetting water capacity of 2000 litres GNIDA/AR

Tractor with Water Tanker with cost of water including P O L SOR-20/Sl.No. 27/Chepter 2

for Sprinkling

J.C.B with driver including pol Based on SOR-20/Sl.No. 31

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement siurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications. and direction of the Engineer-in-charge 15 mm wide and 15 mm deep groove

Labour Cess and GST will be paid extra as per govt. orders