Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.6 LAccepted-Finance COLLINPUR SOUTH ANDAMAN | 1 | Accepted-Finance . | |
| 2 | 2₹43.4 L+₹5.8 L (15.5%)Accepted-Finance GOVT CONTRACTOR 1 32 MOHAMMED HOUSE 23 JIRGATANG SOUTH ANDAMAN PIN 744206 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744206 | 2 | Accepted-Finance . | |
| 3 | 3₹42.4 L+₹4.8 L (12.8%)Accepted-Finance | 3 | Accepted-Finance . |
Tender Value
₹44.4 L
EMD Value
₹88,835
Closing Date
29 Jul 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO, South Andaman
Divisional Forest Office South Andaman Wimberlygunj
Construction of Inspection Hut at R.M.Point, Manglutan Range under South Andaman Division (Full Work)
2024_DFOSA_14763_1
12-4/G-MT/Inspection Hut/R.M.Point/199
Open Tender
Civil Works - Buildings
Works
240 days
R.M.Point, Rutland
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹88,835
2 Jan 2025
9 Jul 2024
29 Jul 2024
9 Jul 2024
29 Jul 2024
9 Jul 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Columns, Plinth wall.
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Varndah, Hall, Room1 and 2, Balcony 1 and 2, Toilet 1,2 & 3.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Varndah, Hall, Room1 and 2, Balcony 1 and 2, Toilet 1,2&3, Toilet, Columns, Plinth wall.
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). Circular Tank platform.
Providing and fixing up to floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)./1:1½:3 (1 Cement: 1½ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). 40 x 20 x 15 cm, Outer, Front wall of Hall, Side walls of hall, Side wall of rooms, Back wall of rooms: Deduction, Window (W) TH, Window (W) DH, Door D, Door D2. 40 x 20 x 10 cm, Inner wall, partion btwn Hall & Bed, Bed room walls, Backside toilet. Deduction: Door (D1), Ventilator (V)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including
Providing cement concrete surface drain with 1:4:8 finishing with cement mortar 1:4, including floaoating cont. of neat cement in- side the drain on including top and exposed side including earth work excavation. 15 cm x 15 cm. Suface drain.
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Main Building Col. 1nd footing, 2nd footing(Tranucated), 3rd footing, Short Column.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Col, Plinth Beam, Tie beam, Lintel Beam ( Outer )
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)/.with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). Shelf for cup board.
Centring and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. Main Building Col., 1nd footing, 2nd footing(Tranucated), 3rd footing, Short Column.
Suspended floors, roofs, landings, balconies and access platform. Shelves (Cast in situ), Cupboard
Lintels, beams, plinth beams, girders, bressumers and cantilevers. Plinth Beam, Tie beam, Lintel Beam ( Outer ).
Columns, Pillars, Piers, Abutments, Posts and Struts. Main Building Col.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars: Jali 10Q @ 0.15 c/c both ways, Col 16Q 4 Nos Main, Stirrups 8mm Q @15 cm c/c Main, Plinth Beam 12 mm Q 04 Nos, Plinth Beam 10 mm Q 02 Nos, Stirrups 8mm Q @15 cm c/c, Tie Beam 12 mm Q 04 Nos, Tie Beam 10 mm Q 02Nos, Tie Beam 12 mm Q 04 Nos, Lintel Beam 10 mm Q 04 Nos, Cupboard 10 mm Q @ 20 cm c/c, Cupboard 08mmQ @12cm c/c
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Paduk/Teak Timber ( Cat-I-A): Door (D), Door (D1), Door (D2), Window(TH) W, Window(DH) W1, Ventilator (V)
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separate. Paduk/Teak Timber ( Cat-I-A): 35 mm thick shutters. Door (D), Door (D1), Door (D2), Window(TH) W, Window(DH) W1, Ventilator (V)
Providing and fixing M.S. grills of required pattern in frames of dowsetc. with M.S. flats, square or round bars etc. including iming coatwith approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Windows,Ventilator etc.
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size. Door (D), Door (D1), Door (D2), Window(TH) W, Window(DH) W1, Ventilator (V)
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm.
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 150 x10 mm. Door (D), Door (D1), Door (D2)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 100x10 mm. Window(TH) W, Window(DH) W1.
Providing and fixing bright finished brass handles with screws etc. complete. 125 mm. Door (D), Door (D1), Door (D2).
Providing and fixing bright finished brass handles with screws etc. complete. 100 mm. Window
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Main Truss, 50 mm Q, Tie 50 mmQ, Support25 mmQ, Middle Rafter, Tie 65 mmQ, Support 25 mmQ, Jack Rafter, 65 mm Q, Porch, Purlin Main Bldg.40mmQ, Plate 20x20x8mm, Flat 40x6mm, Bolts & Nuts with washer.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Step Runner & Support 2". Gate 1 1/2".
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade pigment using white cement.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm. Bath cum Toilet, Hall, Skirting, Varndah, Bed Rooms1&2, Passage, Balcony 1 and 2
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete . White face insulating board.6 mm thick. Bath room, For Eaves Board and front and back covereing.
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 75 mm diameter.
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 110 mm diameter
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expan. Single tee with door. 110x110x110 mm.
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expan. Single tee without door.75x75x75 mm
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expan. Bend 87.5°.75 mm bend.
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expan.110 mm bend
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any etc.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 m. Ridges plain (500 - 600mm).
12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand). Front wall of Hall, Side walls of hall, Side wall of rooms, Back wall of rooms, partion btwn Hall & Bed, Bed room walls, Back side toilet
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Front wall of Hall. Side walls of hall. Side wall of rooms. Back wall of rooms, partion btwn Hall & Bed, Bed room walls, Back side toilet.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Door (D), Door (D1), Door (D2), Window(TH) W, Window(DH) W1, Ventilator (V), Gate, Window,and Ventilator Grills.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank . Circular tank
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm ...... 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) . Hall, Room 1 & 2, Verandah, Balcony 1 & 2, Passage.
Providing & installation of electrical fittings in all rooms with fixing of lights , hall , wash rooms,celling verandah etc.all works complete.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Lyrics S Trap EWC-LYS-WHT-3885155300 UFSM.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia.
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 1500x450 mm.
Providing and fixing toilet paper holder : C.P. brass.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
Providing and fixing of stop cock/pillar cock 1"
Providing and fixing of Angle cock 1/2"
Providing and fixing of Hand shower
Providing and fixing water Geyser 06 Ltr
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). "L" angle (2.5mm thick 11/2" x 11/2" ). "T" angle (2.5mm thick 11/2" x 1" ).
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
Transportation of all building materials up to R M Point construction site with the means of water transport through Dinghi or Pantoon .
ANAND TRADERS AND CONSTRUCTION
Haneefa Constructions
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .