SUPPLY, INSTALLATION AND COMMISSIONING OF MOTORIZED SHUTTER FOR SUGAR GODOWN WITH ACCESSORIES ON DOOR DELIVERY BASIS AT HBL PLANT LAURIYA

Supply & Installation of Rolling Shutters Technical Specifications: Size: Clear Opening - 15.8 ft (W) × 16.6 ft (H) • Shutter Curtain: GI Sheet, thickness 0.9 mm, with curve design profile • Finish: Zinc-coated, corrosion-resistant, primer-painted, suitable for external use Accessories / Components: • Super Bottom and Heavy-duty bottom rail for added strength and stability. • U-Guide (4 inch): MS/GI side guides with minimum 4" width for smooth vertical movement and wind resistance. • Top Cover: Protective hood/cover for the shaft and rolling mechanism. • Hollow Pipe: Heavy-duty hollow shaft/pipe for rolling operation. Fabrication & Installation: • All Fabrication as per IS standards for rolling shutters. • Welding, grinding, and finishing shall be smooth and uniform. • Proper alignment during installation for smooth and noiseless operation. Painting / Finish: • All MS/GI supporting members shall be painted with one coat of red oxide primer and two coats of enamel paint (shade as approved). • GI shutter curtain to retain natural galvanized finish or painted as directed by the Engineer in Charge.

Supply & Installation of Motor Motor Specifications: • Motor Type: Strong LIFE AC Motor suitable (for rolling shutter applications) • Load Capacity: 800 Kg • Duty Cycle: Heavy-duty, designed for frequent up/down operation. • Voltage: 415V AC, Three Phase (as required) • Protection: In-built thermal overload protection, IP-rated housing Accessories: • Remote Control Units: 2 Nos. (wireless, pre-programmed for shutter operation) • Controller: 1 Nos. (control box with up/down/stop with remote integration system) • Bracket: 1 Nos. (for mounting and balancing the motor with the shaft/pipe) • ON/OFF Switch: 1 Nos. (manual switch for local operation in addition for remote control) Features: • Smooth and noiseless operation. • Provision for manual override/chain system for power failure. • Long life and low maintenance design. • Safety locking arrangement to prevent free fall of shutter in case of malfunction. Installation & Commissioning: • Proper alignment and mounting with existing/new shaft assembly. • Testing of motor operations with shutter movement (up/down/stop). • Demonstration of remote and manual operation.