Construction on Mini Community Hall in Ayyapatti village at A.Melaiyur Panchayat

Amount

Construction of Mini Community hall (AD kudiyiruppu) A.Melaiyur Village & Panchayat

Earthwork excavation in all classes of soil with initial lead & lift as per SS 20B for fOUNDATION etc complete

Collection and supply of sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard specifications

CC 1:4:8 mix using 40mm metal including all cost & conveyance of all materials to site & all labour charges etc complete

Supplying and filling of conveyed earth with a lead of 1Km for basement filling

Providing Steel centering & shuttering charges for RCC & plain surface cost of country wood plank including all cost & conveyance and all labour charges etc complete Below Basement

Providing Steel centering & shuttering charges for RCC & plain surface cost of country wood plank including all cost & conveyance and all labour charges etc complete Above basement

Brick work in Cm 1:5 mix using Country bricks including all cost & conveyance of all materials to site & all labour charges etc complete for Foundation & Basement

Supply & cost of fabrication steel including cost of steel & binding wire tying, bending in position etc

R.C.C. 1:1.5:3 mix using 20mm metal including all cost & conveyance of all materials to site & all labour charges etc complete for Foundation & Basement

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary,laying in postion and pointing with white cement mixed with colouring pigment at the rate 0.3 kg. / sq.m etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Weathering course with brick jelly lime concrete using 20mm brick jelly including all cost & conveyance of all materials to site & all labour charges etc complete

Finishing the roof top with One course of pressed tiles including all cost & conveyance of all materials to site & all labour charges etc complete

Plastering with Cm 1:5 mix to 12mm thick including all cost & conveyance of all materials to site & all labour charges etc complete

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing,etc.,complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete(TWAD p- 91) 22 -23

Supply & cost of Fully panelled Double leaf - Window (without Ventilator) Window size 1.20 x 1.30m

Labour charges for fixing doors alongwith frames in position etc., complete (finished work) (pwd p.no;31)

Labour charges for fixing windows and ventilators along with frames in position etc., complete. (pwd p.no;31)

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete ( Inner wall )

Painting two coats of newly plastered wall surface with ready mixed Plastic Emulsion Paint of First quality of approved colour over a Priming Coat including thorough scrapping , clean removal of dirt and including necessary all cost & conveyance of all materials to site & all labour charges etc complete

Painting two coats over new iron works such as steel door, windows, ventilators, window bars, balustrades etc., with best approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Cost & supply of PVC tank

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Wiring with 2x2.05 sqmm PVC unsheathed SC Copper conductor of 650 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter locking CS plug Including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug Point [SD NO 36 ]

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box [SD no.136]

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit [SD no.125]

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD NO 64

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains SD NO 67

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD NO 87

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL SD NO 83

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD NO 106

Supply and fixing of 4'40W twin street light fluorescent fitting complete with copper choke and condensor with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads with MS clarnps and aluminium painting with fluorescent tubes SD No 94

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metre SD NO 75

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

DHANALAKSHMI S (BID ID -1382227)