RENOVATION WORK IN HIGH TECH PARLOUR BUILDING AND REPAIR WORKS IN PLAY EQUIPMENTS, RENOVATION WORKS IN GM QUARTERS, PROVIDING CONCRETE RAMP IN THE DAIRY ENTRANCE OF MAIN DAIRY MADURAI

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete

Supply and installation of a frameless glass partition fabricated 8mm clear glass + 1.52mm PVB + 6mm performance glass from 12 mm thick clear toughened glass Providing,assemblingand supplyingoflaminated glass panels for SKYLIGHT using heat Strengthened clear Glass and toughenedglasssandwichedusing1.52PVBlayer.TheGlassof approvedcolour, sizeand shape as required shade all complete for the required performance , as directed by the Engineer - in - Charge. The heat strengthened clear glass having properties as U value of 4.20 to 5.50 W/m2 or lowerdegreeKetc., Solar heatgaincoefficientlessthanorequalto0.35.Thesandwichpanels shall be assembled in the factory/ workshop of the glass processor. The certificate obtained from approvedagencyshouldbeproducedforheat soak test for clear glass. For payment, only the actualareaofglassonface#1oftheglasspanels(excludingtheareasofthegroovesand weathersiliconesealant)providedandfixedinposition,shallbemeasuredinsqmetc., complete complying with standard specification

Labour charges for fabricating the Rolling shutter gate using MS angle sections suitable sizes. The rate inclusive of cost of all materials, labour charge for fixing in position, one coat of metal primer and conveyance, etc., complete as directed.

Labour charges for reparing SS Gate in the parlour The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges, etc. complete

Dismantling the Existing ceramic tile flooring / dadoing / Mosic Flooring etc., including clearing away by shifting the unwanted dismantled materilas for disposal by local conveyance with a lead up to 10 KM including loading and unloading charges etc., complete as direced.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications

Supplying and fixing in position Indian water closet of size 580x440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap conforming to IS 2556-Part XII with 10 lit capacity PVC flush tank and internal fittings with sand cushion and forming, flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to case iron soil pipes by dismantling brick masonary, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without quality with 'P' trap or 'S' trap conforming to IS:2556 leakage etc., complete complying with standard specifications.

Supplying and fixing in position Indian make white glazed earthernware Magnum urinal of ISI standard and best approved colour urinal of best approved quality with G.I.pipe connection of 32mm, bell mouthed, waste Pipe, 15mm. dia G.M. Gate value bring the urinal to the wall in position with necessary T.W.Plugs, clamps, shellac etc., including dismantling masonry if necessary and readoing the same to original condition fixing the 15mm. dia G.I.pipe and wheel valve. Painting the pipe with two coats of approved paint over one coat of primer and checked without any breakage complete complying with standard specification.