Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹44.9 L+₹4.1 L (10.1%)Rejected-Finance OFFICE NO 2 GROUND FLOOR CO OP HSG SOCIETY SBS ROAD COLABA MARKET MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹48.5 L+₹7.8 L (19.1%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹50.6 L+₹9.9 L (24.2%)Rejected-Finance 47 HUSENI LAKDA BAZAAR 242 BELLAIS ROAD MUMBAI 08 | MUMBAI | MUMBAI | MAHARASHTRA | 400008 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹63.6 L+₹22.8 L (56.1%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
10 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIRS TO DOOR WINDOWS CUP BOARD WIRE MESH AND OTHER BR MISC WORK IN MD ACCN AND PERIODICAL SERVICS TO EXTERNAL SURFACE AND COMMON AREA OF BLDG AT OLD NAVY NAGAR UNDER AGE BR I UNDER GE NW NAVY NAGAR COLABA MUMBAI
2023_MES_633019_1
8166/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar
Class C Category a(i)
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.7 L
Yes
20 Feb 2024
15 Dec 2023
12 Jan 2024
15 Dec 2023
10 Jan 2024
5 Jan 2024
15 Dec 2023 - 29 Dec 2023
Amount
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by Engineer in charge
Supply & fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing in SSR Part-II complete all as specified and as directed by Engineer in charge
Supply & fixing Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing in SSR Part II complete all as specified and directed by Engineer in charge
Taking down shutters of any description exceeding 1 Sqm and not exc 2 Sqm each at any storey of building complete all as specified and directed by Engineer in charge.
Supply & fixing, 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. The size of rail and stile as per IS :300 kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer in charge.
Supply and fixing 2nd class hardwood 35mm thick glazed andskeleton shutters, open rebated and prepared to receive glass,wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh supplied and fixed to chowkats etc, sizes of members of shutters as specified in SSR Part l complete all as specified and directed by Engineer in charge.
Material & labour for Cup-board shutters and shelf made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including 6mm teakwood lipping on exposed edges complete all as specified and as directed by Engr-in-Charge upto 12 storey of building complete all as specified and directed by Engineer in charge.
Supply and fixing in repairs 2nd class hardwood bullnosed splayed, chamfered or rounded on edge fillets rectangular in section, sectional area exc 6 but n. exc 13 Sqcm fixed with nails complete all as specified and directed by Engineer in charge
Supply and fixing in repairs 2nd class hardwood bullnosed splayed, chamfered or rounded on edge fillets rectangular in section, sectional area exc 13 sq cm and not exc 25 sq cm fixed with nails complete all as specified and directed by Engineer in charge
Supply & fixing Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm fixed at any storey of building complete all as specified and directed by Engineer in charge.
Supply & fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer in charge.
Supply & fixing 100mm size stainless steel Butt hinges, medium weight, and fixed complete all as specified and directed by Engineer in charge.
Supply & fixing 125mm size stainless steel Butt hinges, medium weight, and fixed complete all as specified and directed by Engineer in charge
Supply & fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer in charge
Supply & fixing 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer in charge
Supply & fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer in charge.
Supply & fixing 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer in charge.
Supply & fixing 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer in charge.
Supply & fixing 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed by Engineer in charge.
Material & labour for preparing new wood based or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer upto 9 storey complete all as specified and directed by Engineer in charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and removing rubbish off the premises complete all as specified and directed by Engineer in charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 400x 400 mm area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bedding layer in cement mortar 1:4 complete all as specified and directed by Engineer in charge.
Material and laboour for Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement paste and pointed in white or coloured cement to match laid over and including 10 mm thick rendering as backing layer in Cement Mortar 1:4 complete all as specified and directed by Engineer in charge.
Material & labour for glazed ceramic tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement paste laid over and including 15 mm thick cement plaster in cement mortar 1:4 and pointed in white or colour cement to match complete all as specified and directed by Engineer in charge .
Material & labour for non skid coloured joint free ceramic tiles of size 600mmx600mmx10mm thick in floors laid over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer in charge
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer in charge.
Material and labour for Granite(of any type) 18-20mm thick slab laid on floor machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in cement mortar (1:6) including grinding & polishing complete all as specified and directed by Engineer in charge
Material and labour for Granite(of any type) 18-20mm thick slab laid on wall skirting /dado machine cut, bedded & jointed with grey cement paste & pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick Cement mortar (1:4) including grinding & polishing complete all as specified and directed by Engineer in charge
Material and labour for Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer in charge.
Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and directed by Engineer in charge.
Supply & fixing in repairs brass drawer pulls, 3 screw plate with fixed dished pull, 80 mm to 100mm long complete all as specified and directed by Engineer in charge.
Supply and fixing in repairs aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete all as specified and directed by Engineer in charge.
Supply & fixing aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and fixed on wall with cadmium plated screws complete all as specified and directed by Engineer in charge.
Supply and fixing in repair of 04 pieces pulley operated Cloth Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope,minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of Pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs including taking down old unserviceable cloth hanger complete all as specified and directed by Engineer in charge.
Demolition of Cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MoD land complete all as specified and directed by Engineer in charge.
Material & labour for Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) 40 mm thick in flooring, complete all as specified and directed by Engineer in charge.
Supply & fixing in repairs Cast iron nahani trap 100 mm bore with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) (20mm graded crushed stone aggregate) complete all as specified and directed by Engineer in charge.
Taking down cement plaster of any description including raking out joints hacking for key scrubbing down with water & removed debrises outside MoD land complete all as specified and directed by Engineer in charge.
Material & labour for Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (10+10mm)in two coats in CM (1:4) , mixed with water proofing compound , finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge. Note: WPC to be mixed in setting coat only and shall be measured and paid separately
Material & labour for rendering 15mm thick in CM (1:6) on wall finished even and smooth without using extra cement as in patches complete all as specified and directed by Engineer in charge
Material & labour for rendering 10mm thick in Cement Mortar (1:3) in ceilling finished even and smooth without using extra cement as in patches complete all as specified and directed by Engineer in charge
Material & labour for applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height complete all as specified and directed by Engineer in charge.
Supply only WPC compound complete all as specified and directed by Engineer in charge.
Material & labour for preparation of new undecorated surfaces of walls,soffit of fascias and chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of self primer complete all as per manufacturers instructions
Material & labour for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed by Engineer in charge
Material & labour applying two coats of white wash on new plastered surfaces including preparation of surfaces as in ceiling complete all as specified and directed by Engineer in charge.
Material & labour applying one coat of white wash on old plastered surfaces including preparation of surfaces as in wall complete all as specified and directed by Engineer in charge
Material & labour for applying one coat of white wash on old plastered ceiling surfaces including preparation of surfaces complete all as specified and directed by Engineer in charge
Material & labour for applying one coat of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified and directed by Engineer in charge.
Material & labour for applying two coats of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified and directed by Engineer in charge.
Material & labour for applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed by Engineer in charge.
Material & labour for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer in charge
Material & labour for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed by Engineer in charge
Supply & fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer in charge.
Supply & fixing 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm in each pane fixed to aluminium window frame including hacking out broken glass panes of any description from wooden frames or aluminium fixed with beads complete all as specified and directed by Engineer in charge.
Supply & fixing in repairs100mm stainless steel Butt hinges, medium weight, and fixed complete all as specified and directed by Engineer in charge.
Supply & fixing in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer in charge.
Supply & fixing in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer in charge..
Supply & fixing in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer in charge.
Supply & fixing in repair 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed by Engineer in charge.
Material and labour for Resecuring or easing & adjusting of shutters, without taking down but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer in charge.
Material and labour for Resecuring or easing & adjusting shutters , without taking down upto 1 sq. m each complete all as specified and directed by Engineer in charge.
Demolition of concrete of any description and in any position not otherwise specifically provided for including from sunken portion of WC upto 4 storey and removing the debris outside MoD land complete all as specified and directed by Engineer in charge.
Material & labour for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in Cement Mortar 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over floor and vertical sides of sunken floors including filling water for finding any seepage/ leakage complete all as specified and directed by Engineer in charge. Note: WPC shall be measured and paid seperately
Material & labour for Cement Concrete Type F2 (1:7:12 ) using 40mm graded crushed stone coarse aggregate in sunken floor 150mm thick complete all as specified and directed by Engineer in charge
Supply & fixing in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) pedestal pan,connection to drain and to flushing pipe including trap set in concrete bedding complete all as specified and directed by Engineer in charge.
Supply & fixing in repairs 100 mm bore cast iron 'P' or 'S' trap fixed complete with M-SEAL joint to cast iron 100 mm bore pipe duly fixed in position complete including closing the wall opening in cement mortar 1:3 complete all as specified and directed by Engineer in charge.
Material & labour for 32 mm bore galvanised tubing medium grade as in spout each 50 cm long, cutting to shape as required, cutting hole through wall of any thickness, fixing in PCC 1:2:4 type B-1 making good the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified and directed by Engineer in charge.
Grubbing up and uprooting of trees / plants from external walls of buildings pouring muratic acid for burning residual roots in any. Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) type B 0 using 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary scaffolding and safety arrangement complete all as specified and directed by Engineer in charge
Material & labour for applying three coats of white wash on new plastered surfaces including preparation of surfaces as in ceilling complete all as specified and directed by Engineer in charge.
Preparation of old decorated surfaces of walls by scrapping old surface washing the surface with Bleaching powder throughly,filling the cracks with cracks filling compound of DR Fixit crack free chemical or shrink free as per manufacturer instruction & applying one coat of weather proof acrylic based paint (100%) exterior grade including scaffolding and safety arrangements complete all as specified and directed by Engineer in charge a) Old surface shall be cleaned with bleaching powder as specified including biowash all as per maufacturer instructions. All Cracks shall be filled with white cement and Sand Mortar (1:3) by making V grooves of Appropiate size. b) Acrylic painting shall be done with Roller. c) Rate Quoted shall be of Scaffolding
Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing debris outside MoD land complete all as specified and directed by Engineer in charge.
Material & labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer in charge.
Dismantling of Plain or corrugated FRP /Steel chajja , shed any Gauge thickness including all fittings complete all as specified and directed by Engineer in charge.
Supply & fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer in charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided, embedded in PCC /Brick work complete all as specified and directed by Engineer in charge.
Supply & fixing Framed brackets / purlins of angle or tee sections with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer in charge.
Supply & fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed by Engineer in charge.
Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer in charge.
Material & labour for filleting in any position and to any shape of section area not exc 25 sq cm in cement sand mortar 1:4 including all mitres, stops etc complete all as specified and directed by Engineer in charge.
Material & labour for udaipur green/baroda green marble slab 18-20 mm thick over cooking platform and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar (1:3) and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete all as specified and directed by Engineer in charge.
Taking down Cast iron soil waste pipe (any size and patterns) mouldings all fittings heads, shoes, bends including necessary working platform (scaffoldings) and safety measures complete all as specified and directed by Engineer in charge.
Supply & fixing 100 mm bore cast iron sand cast pipes in any length with or without ears, with cement joints fixed on walls including necessary working platform (scaffoldings) and safety measures complete all as specified and directed by Engineer in charge.
Supply & fixing 75 mm bore cast iron sand cast pipes in any length with or without ears, with cement joints fixed on walls including necessary working platform (scaffoldings) and safety measures complete all as specified and directed by Engineer in charge.
Supply & fixing CI Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 100 mm bore complete all as specified and directed by Engineer in charge.
Supply & fixing CI Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm bore complete all as specified and directed by Engineer in charge.
Supply & fixing CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 100 mm complete all as specified and directed by Engineer in charge.
Supply & fixing CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 75 mm complete all as specified and directed by Engineer in charge.
Supply & fixing CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 100 mm complete all as specified and directed by Engineer in charge.
Taking down PVC rainwater, soil, waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,(measured overall as fixed along the centre line over fittings and accessories) including necessary working platform (scaffoldings) and safety measures complete all as specified and directed by Engineer in charge.
Supply & fixing 150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including necessary working platform (scaffoldings) and safety measures complete all as specified and directed by Engineer in charge.
Supply & fixing in repair PVC bends of 150mm dia complete all as specified and directed by Engineer in charge.
Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 1.5 mm Flat Iron including all fittings like sockets, bend, junction, elbow etc complete all as specified and directed by Engineer in charge.
Supply & fixing in repair PVC bends of 110mm dia complete all as specified and directed by Engineer in charge.
Material & labour for Writing letters of figures (Block,Roman,Italic, or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level) complete all as specified and directed by Engineer in charge.
Material & labour for one coat of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaning the surfaces with water complete all as specified and directed by Engineer in charge.
Cleaning of non accessable roof including removing accumulated vegetation plant with roots and making good the surface with cement mortar (1:3) and mouths of rain water pipe and removal of debris outside MoD land complete all as specified and directed by Engineer in charge.
M/s. MAYUR ENTERPRISES
RAMESH ENTERPRISES
Unity Enterprises
Anil Industrial Corporation
Nilesh Construction
AGRAWAL ASSOCIATES
Shetty Construction Co
SHREE JAGDISH FURNITURE CO.
Genius Construction Co.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .