Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹42.5 L+₹4.1 L (10.6%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹43.2 L+₹4.8 L (12.6%)Rejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Srinath P L
GE I Kanpur Cariappa Road Kanpur Cantt 208004
WELCOME MAINTENANCE AND OTHER MISC B R WORKS UNDER AGE B R II OF GE I KANPUR CANTT
2022_MES_532322_1
GE(I)/KAN/T-32 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
KANPUR
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE I KANPUR
₹90,000
Yes
30 Aug 2022
20 Jun 2022
4 Aug 2022
20 Jun 2022
30 Jul 2022
4 Jul 2022
Amount
Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level).
M & L for Preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coats of white wash, complete all as specified and directed by Engineer –in-Charge.
M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white washing on wall complete all as specified and as directed.
M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of colour washing on wall complete all as specified and as directed.
M & L for Preparation of old painted wooden surfaces over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint of approved shade, complete all as specified.
Preparation of old steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint (of approved shade) complete all as specified.
Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying One coats of oil bound distemper (of approved shade), complete all as specified and directed by the Engineer-in-Charge. Make of wall putty:- Birla/JK/Kamdhenu
M & L complete removal of existing treatment and and applying two coat of oil bond distemper over 1 mm thick wall care putty , complete all as specified and directed. Make of wall care putty JK/Birla
Cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 250 litre to 500 litre capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distance of not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘Date of cleaning the tank ’, complete all as directed by Engineer-in-Charge.
All as per Srl item No-9 here-in-before but capacity of tank 501 to 1000 litres
M &. L for cutting chases for concealed water tubing and making good in CM (1:3), cutting not exc 10 CM girth in brick wall complete all as specified and directed
Dismantling water tanks and remove to store capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed.
S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. Make: Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE(I).
Dismantling water tanks and remove to store capacity exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.
S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. Make: Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE(I).
S&F in repair tubular towel rail 20mm dia D type 60cm long between flanges brass CP complete all as specified...( Make -L&K , Hindware or eqivelant )
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store, complete all as specified.
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store, complete all as specified.
M & L for GI tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.
M & L for GI tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.
All as per Srl item No 19 above but except pipe and complete all as specified and directed.
All as per Srl item No 20 above but except pipe and complete all as specified and directed.
S & F in repair Stop valves, 20 mm bore cast copper alloy screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe, complete all as specified.
S & F in repair 20mm ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified. Make : PRAYAG, COMMANDER, PRINCE,Pearl
S&F in repair PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, complete all as directed by Engineer -in-Charge.
Taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc and complete all as specified and directed.
M & L for Rendering 15 mm thick cement plaster in Cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth w/o using extra cement and complete all as specified and directed.
M & L for Rendering 15 mm thick in two coats. First coat 10 mm thick in CM (1:6) & top layer 5 mm thick in CM (1:4) with mixing integral water proofing compound as per manufacturer's instruction & finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing compound shall be measured and paid separately.
M & L for Rendering 10 mm thick cement plaster in Cement mortar (1:3) on RCC Ceiling ,finished even and smooth w/o using extra cement.
Supply only water proofing compound ISI marked and complete all as specified and directed.
M&L, applying two coats of distemper oil emulsion over a coat of primer on new surfaces including preparation of new surfaces, finished even and smooth using chalh whiting/ JK wall putty complete all as specified and directed by Engg in charge.
M & L Applying three coats of white wash on celing including preparation of new surfaces, complete all as specified.
M & L for preparation of new plaster surface and Applying one coat Primer and two coat of colour wash on walls ,complete all as specified.
S & F in repair 15 mm bore central hole basin mixture , chromium plated, without popup waste system with 450mm long hoses pipe fixed in repair, complete all as directed.
S & F in repair 15 mm bore Wall mixture with 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe connecting legs & wall flanges complete all as specified .
S&F in repair Mirror cabinet (PTMT Alloy etc complete all as specified.
S&F in repair CP hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber as approved by GE(I)
S&F 125mm dia shower rose, Brass , chromium plated with swivel joint complete fixed in repair.
S&F in repair looking Mirror screwing with high quality screw (size 900x600mm complete all as specified.Pryag Cat No-BLM -01
S&F in repair, oval counter type vitreous china wash hand basin of size 56x41 cms, white including waste coupling of PTMT 32 mm.complete all as specified and directed by Engineer- in-Charge
S & F in repair for cascade type China ware closet pedastal pattern of superior special colour including fixing bolts, Fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and directed by Engg-inCharge.
S&Fin repair full glass shelf ,chromium plated , complete all as directed Engineer -in-Charge.Pryag Cat No-BEA -45
S&F in repairToilet paper holder ,chromium plated , complete all as directed Engineer -in-Charge.Pryag Cat No-BA-18
S&F in repair Towel Rack ,chromium plated , complete all as directed.Engineer -in-Charge.Pryag Cat No-BA -12
S&Fin repair Towel Ring , chromium plated ,complete all as directed by Engineer -in-Charge.Pryag Cat No-Ba-11
S&Fin repair Tumbler Holder , chromium plated ,complete all as directed by Engineer -in-Charge.Pryag Cat No-BA-16
S&Fin repair Soap dish , chromium plated , complete all as directed by Engineer -in-ChargePryag Cat No-BA-45
S&Fin repair full Corner shelf ,chromium plated complete all as directed Engineer -in-Charge.Pryag Cat No-BEA -52
S&F, 15mm Bip taps, cast copper alloy(chromium plated) with crutch handle or butter fly handle screwed down , screwed for iron pipe and fixed in repair.
S & F 15mm Angle valves cast copper alloy , cast copper alloy ,chromium plated ,screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified .
S&F in repair Conceeled stop cock,15 mm bore, cast copper alloy ,chromium plated ,screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified .
S& F in repair CP Sink mixture with swinging casted round shape spout (wall mounted model) with connecting legs &wall flanges.
S & F in repair CP Two Way Bib cock with wall flange.
S &F in repair Wall Mixer Non Telephonic Shower Arrangement with connecting legs & wall Flanges .
Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, including C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.
S & F in repair15 mm Pillar taps, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.
S& F in repair for Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest (exclusive flusing cistern& flush pipe) fixed in repairs including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 complete all as specified.
M & L for 50 mm thick, plain cement concrete 1:3:6, type C-1, using 20 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.
Dismentling floors, hearth or wall tiling including cement morter bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed .
M&L Vitrified tiles , light shade,10 mm thick( square/rectangular) polished ,area of each tile not exceeding 0.36 sqm , laid in floors over 15 mm thick screed bed in cement mortar 1:6, including pointing in white or coloured cement to match the shade of tiles,complete all as specified and directed.Make:KAJARIA/JOHNSON/SOMANY/BELL/ ORIENT
All as per Srl item No 60 above but as in skirting, dados, laid over 10 mm thick rendering of CM(1:4) and -ditto-.
M & L for First quality ,Non skid coloured ceramic tiles 7to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, laid in floors over 15 mm thick screed bed in cement mortar 1:6, including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed.Make:KAJARIA/JOHNSON/SOMANY/BELL/ ORIENT
M & L for First quality glazed ceramic coloured tiles of size (450x300mm)x7 mm thick,laid on vertical surface such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set in cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Labour only for making rounding to edges of granite slab in cooking platform.
S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .
S&F in repairs Vitreous china wash down water closet pan pedestal pattern (EWC) including P or S trap, plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed by EIC.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and over and mild steel chromium plated or aluminized hinging device fixing in repair( Make Parry ware and equivalent)
S&F stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495mm x420mm, with bowl size 405mmx 355mm x 178mm with including waste coupling, waste pipe complete all as specified and directed (Make " Nirali, blue star or equivalent)
S&F in repair sinks with drainage board of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling.
S&F low density polyethylene pipes (LDPE) of pressure rating 6KGF/Sqm cm 32 mm bore in repair
S&F Ball and catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.
S&F 40mm width Continuos (piano) hinges,brass
M&L 20 mm thick PVC board made out of 18 mm thick PVC ply and 1 mm thick PVC ply free from rigid one side prelaminated and one side palin colour, PVC sheet stuck on both side with solvent cement adhesive to make the board of 20 mm thick for cub board & wardrobe .
S&F 40mm dia,brass polished cupboards knobs fixed with nut,screw and washer of mild steel,bright finished in repairs.
Taking down chowkhats or frames n. exc 1.5 sqm each with shutters (without taking of shutters from the frames ) and complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames ) and complete all as specified and directed.
Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each, from chowkats, complete all as specified.
S&F, mild steel 300mm, ordinary rat tail door spring etc complete all as specified.
S&F Galvanished mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperature 1.18 mm & fixed with tinned tacks, galvanised wire staples, complete all; as specified and directed by E-I-C.
S&F as in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples
S&F, Aluminium anodised barrel tower bolts, 150mm long , of extruded section and fixed .
S&F, aluminium alloy anodised sliding door bolts , 16 mm diaof 250 mm long with hasp,staple(bolt type) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section and fixed.
S&F MS Butt hinges medium weight cold rolled of 100 mm size and fixed .
S&F, aluminium handles , 150 mm size, cast type .
S&F, repair Fency type stain less steel curtain rods of 20 mm dia , as in doors/ windows pelmets including SS brackets and SS funnels.
S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Hacking out old brocken glass of any thickness , size and description n exc 0.50 sqm in each pan matal frame glazing with oil putty or fixed with beadings etc.
S &F Figured glass, pin head type and glazing with oil putty in squares n exc 1.0 sq.m. in each pane
S&F, 3 mm thick sheet glass , ordinary quality with oil putty in square n exc 1.0 sqm in each pan.
S&F PVC connections 15mm size with PTMT nuts of length 450mm
S&F. PVC connection 15 mm size with PTMT nuts of length 600 mm.
Dismantling of Asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and as directed by the Engineer-in-charge.
M&L pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with screws complete all as specified and as directed.
M & L for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L joist channel, angle,or tee section sections, fixed independently, without conctecting ,plates, etc cut to ordinary lenths i.e within 20mm of the length indicated)complete all as specified and as directed
Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height complete all as specified and directed.
Supply & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 X 600 X 12 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38-41%.The steel angle should be of “Armstrong” make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32, 27 and 27mm and a load carrying capacity of 7.5 Kgs/Sqm. The T Sections have a Galvanizing of 90 grams per Sqm & passed through 500 hrs of Salt test ,Perimeter trim to be Armstrong wall angles of size 30x19x19mm, secured to walls at 450 mm maximum centre to centre hanging with 4 mm GI wire copmlete all as specified and directed according to manufacturers instruction and Complete including taking down od false ceiling all as specified and as directed by ENGR-IN-CHARGE.
S& F in repair for Aluminium body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed
S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.Note: Nirali/Blue star/Prayag/Neelkanth as approved by GE (I).
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire radiantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S & F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely.
S&F of 100 mm long PVC butt hinges, complete all as specified and directed.
S&F of 150 mm long PVC handles, complete all as specified and directed.
S&F of 150 mm long PVC barrel tower bolt complete all as specified and directed.
S & F factory made uPVC white colour two track two panels sliding glazed window upto 1.50 m height made of small series frame50x44mm & sash 32x60mm both having wall thickness of 1.9+- 0.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm ) comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profile duly reinforced with 1.6+-0.2mm thick galvanized mild steel section made from roll forming process of required length shape & size according to uPVC profile), appropriate dimension of uPVC extrudedglazing beads and uPVC extruded interlocks, EPDM gasket,wool pile,zinc alloy white powder coated touch locks with hook, zinc alloy body with single nylon roller weight bearing capacity to be 40 kg ),GI fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screw etc profile of frame & sash shall be mitred cut and fusion welded at al corner, including galvanised mild steel wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and including drilling and including 5.0 mm thick tinted glass with necessary beading / packing and necessary fittings &fixtures , fixed with tinned tacks or galvanised wire staples drilling and complete all as specified and directed.
S&F 3 track window frame(124mmx50mm) is shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 2 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is clear to translucent PC sheet Or 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails,Mosquito net is fixed with SS wiremesh jali using S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look and complete all as specified and directed.
S&F, aluminium chequered grills as on aluminium windows, wight n.exc .0.50 kg / sqm and fixed all as specified and directed by Engg- in Charge.
M&L for rigid PVC foam profiles ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass and SS Jalli as per requirement.
M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
M&L for complete removal of old treatment and applying smart care damp block 2k waterproof coating cementitious powder as per manufacturing instruction of Asian paint, for damp treatment of wall and applying two coat of oil bound of distemper complete all as specified and directed by Engr-in-charge.
S & F in repair second class hardwood boarding 25 mm in flooring ,skirting Planed one side, with butt joints and fixed with nails supplied and fixed French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats
S&F Door chaukhat frame (Single rebate) shall be made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin which are workable like wood normal carpentry tool and skill chaukhat frame has 71 mm width & 45 mm thickness suitable to fix 28/30/35 mm thick door shutter and shall be fixed to wall as per instruction of engineer in charge using full threaded 100x8 sheet metal screw and roll plugs to avoid gaps between wall frame cover moulding of size 46mm x 15 mm is provided. Vertical and horizontal style joint to gather with special UPVC solvent adhesive and 75 x 8 mm full threaded sheet metal screw for additional corner joint strength GI 'C' stiffener 40 mm x 19 mm x19 mm x 0.6 mm thick is provided for additional strength. Chakhut frame can be made in natural finish as per direction of Engineer-in-Charge.
Supply & Fix door shutter shall be made solid UPVC foam profile with homogenous fine cellular structure smooth outer integral skin having 35 mm width & 25 mm thick as vertical & horizontal stiles. Joints are made using solvent adhesive and infill panel shall be filled with 250 mm wide & 6 mm thick on both side which are adhered together with specialty adhesive to EPS sheet in between as per manufacture' guideline. MS pipe frame is fitted inside the outer frame to impart additionl strength 8" wide X 12 mm thick ecolink sheet /plywood is provided as the center for holding hardware more securely. Normal hardware & fitting shall be fixed Door Shutter can be made in natural finish design as per instruction of Engr-in-Charge.
KALI CHARAN PANDEY
ESKEY COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .