PROVN OF RCC UNDER GROUND WATER SUMP OF CAPACITY 0.75 LAKH LTR WITH PUMPING FACILITIES INCLUDING ALLIED WORK SERVICES IN THE AREA OF AGE U WS NO I UNDER GE U WS DELHI CANTT 10

Amount

Sch 'A' Sec-I ( Building Work) Construction of RCC,Semi Under ground sump for capacity 75000 Ltr as shown in drawing sheet No 1/1 of dt 23 Aug 2022 complete all as specified and directed.

Sch 'A' Sec-II (Part-II ) (Miscellaneous B/R Work) M&L for 75mm thick base of cement concrete 1:4:8 type D-2 using 40 mm graded aggregate complete all as specified and directed.

M&L for 40 mm thick base of cement concrete 1:4:8 type D-2 using 40 mm graded aggregate complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for rolled mild steel work curved or straight as in joist, channel, angle, tee sections, flats, fixed independently, rivetting or welding, with/without connecting plates etc, (cut to ordinary length within 20 mm of the length indicated) using Fe-290 (Gde 165) including painting with one coat primer and two coat synthetic enamel paint complete all as specified and directed.

M&L for brick work with sub-class-B bricks, straight or curved on plan to any radius built in CM 1:6 complete all as specified .

M&L, rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) & finishing the surface even & smooth without using extra cement, complete all as specified.

M&L for preparation of new plastered surface of walls and M&L for apply two coat of cement base paint over a coat of primer applying complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment (plastic coated) complete all as specified and directed.

M&L for sand filling for cushion under interlocking pavers 50mm thickness including watering and ramming and levelling complete all as specified and directed.

Sch 'A' Sec-III (External Water Supply )Excavation in trenches not exc 1.5 metres wide and not exc1.5 metres deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed.

Supply, installation , testing and commissioning of centrifugal pump set , split casing type electric driven having bronze impeller and stainless steel shaft mounted on common base frame having energy efficient motor TEFC EFF-1 running at 1440 RPM, conforing to IS-12615, coupling guard ,coupling etc complete suitable for 20 LPS , 30 meter head ,415 V +_ 10% , 3 phase 50 Hz confirming to IS-5199 2002 including MS channel Base, PCC work for base, vibrating pads,MS bolts with nuts complete all as specified and directed.

Supply, laying jointing,testing DI pipe with spigot socketed ends , class K-7, conforming to IS-8329-2000 laid in trenches of the following sizes complete all as specified and directed. Note ;- Joint will be measured and paid seprataly.

100 mm bore

150 mm bore

Material and labour for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe of following size/bore :-

100 mm bore

150 mm bore

Material and labour for DI specials such as Tees, bends of any size and radius, collars, tapers, tail pieces, caps and plugs etc upto 200mm bore

Material and labour for CI specials such as Tees, bends of any size and radius, collars, tapers, tail pieces, caps and plugs etc upto 200mm bore

Supplying , laying , jointing, welding and testing MS Pipe (Heavy duty class 'C') IS : 1239/3589, of followiing sizes laid in trenches or in Horizontal/Vertical/inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, for following size :- Note:- MS Flanges incl fabrication work will be measured and paid separately.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Supply and fixing of MS flange ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasket joint of following size :

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Supply and fixing PVC insulated multistranded copper conductor wire of 10 Sqmm size, single core, 1100 volts complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core including connecting up and thimble, nut bolts washer etc complete all as specified and directed.

Supply & fixing , install testing and commissioning of feeder pillar box, outdoor type cubical shape,three phase, 4 wire, copper bus bar for phases and neutral made out of CRCA sheet 3.15 mm thick ,factory fabricated, CPRI approved, powder coated ,dust and vermin proof, provn for ventilation , angle iron frame and four legs of 50x50x6mm thick angle iron, 2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level, grouting properly, and of suitable size to accomodate the items mentioned below and having seperate compartment /chambers for cable gallery busbar ,switch gear etc and comprising of following including necessary cable connections to the MCCBs, voltmeter,Ammeter and cable lugs etc complete all as specified and directed.

Copper bus bar with PVC sleeve suitable for 200 amps for phase & 200 Amp for neutral - 01Set.

Phase indicating lamps LED type ( red , yellow, blue) 01 set

Incoming MCCB 160 Amp 4 pole 25 KA with adjustable thermal and fixed magnetic release -01 No

outgoing MCCB 63 Amp 3 pole 18 KA with adjustable thermal and fixed magnetic release -02 No

Stater for 15 HP , relay range 20-32 ,ML-2 FASD , Volt 415, 50 Hz, 3 phase complete -02 No

Material and labour for Earthing complete with GI earth plate electrode 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.6 mtr below normal ground level surrounded form all sides by 15 cm thick and packed layer of charcoal dust and salt and common salt fitting in alternater layers and elsc connection by using GI strip 25 x 4 mm by means of bolts, nuts, check nuts & washers of galvanised iron and protected by light grade 40 mm dia GI pipe connected to main switch board of main control board and GI pipe light grade 20 mm dia for watering and including funnel, wire mesh, PCC pit cover and PCC chamber pit with PCC 1:2:4 type C2 incldinging excuvation and earth work, disposal of surplus soil to a distance not exceeding 50 mtr connection complete all as specified and directed.

Construction of valves pit chamber having intermal dimention 120 cm * 120cm*120 cm (internal height) using PCC (1:4:8) 40mm graded stone aggregate for foundation 15 cms. Thick, 23 cm tick wall in CM (1:4), 10mm tick rendering all around the brick work with 1:6 cement mortar, PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 3mm tick MS top sheet cover with locking arrangement including 50mm pad lock with double key angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers including necessary excavation in any type of soil, returning filling in and removal of surpuls soil to a distance not exceeding 50 mtrs complete all as specified and directed.

M&L for fabrication (welding work ) of MS Header/ any size upto 200mm MS pipe for connection on header complete all as specified and directed.

Excavation in trenches by cutting of road crossing, PCC hard standing for laying of pipe lines including PCC (1:2:4) type B-I (with 20 mm graded aggregate) as in coping, grouting, finished even and smooth without using extra cement as on brick work/flooring complete including demolition making good the existing surface complete all as specified and as directed.

Supply & Laying of GI pipe mediun grade ISI mark including all fittings in new positions in trenches/wall/floor complete and making good the disterbed surfaces complete all as specified and directed of following sizes.

25mm bore

50mm bore

Supply & Fixing of Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes complete all as specified and directed

25mm bore

50mm bore

Material and labour including jointing and testing of cast iron sluice valves class PN-1.0, conforming to IS-14846 flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets for the follwing sizes complete all as specified .

80 mm bore

100 mm bore

150 mm bore

Supply Fixing Jointing and testing of size cast iron Non Return valve without by pass arrangement, Swing type confirming to IS-5312 flanged ends pressure rating PN 1.0 comlete all as specified and directed. Note :- Complete with jointing material shall deemed to be included in the unit rate of this items.

100 mm bore

150 mm bore

M&L for CI water meter Woltman type magnetic drive class-B flanged end suitable for pipe including all as specified and directed

100 mm bore

150 mm bore

Supplying and fixing CI strainer flanged ends of the followings including jointing materials such as packing , nuts bolts and washer etc complete all as specified and directed

100 mm bore

150 mm bore

Supply, install, lowering, testing and commsissioning of open-well submersible pump set for 03 phase ,415 Volt , head range 24 to 52 mtr head , discharge range 1344-672 LPM for suitable 15 HP of pump set , inlet/outlet 80X65 mm dia as per manufacturer standard including connection complete all as specified and directed.

S & F Fully automatic star delta motor starter of maximum motor output 30 Hp of motor rating AC 3 duty 415V 50 Hz 3 phase, MN-25, relay range 14-23 Amps including connection complete all as specified and as directed

Supply and fixing submersible PVC insulated multistranded copper conductor wire 1100 volt, three core of size 4.00 Sq mm complete all as specified and as directed.

S&F rotational moulded polythylene water storage tanks of capacity 5000 ltr triple layer cylindrical vertical with closed top hoisted and fixed in position complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-2 (with 40 mm graded aggregate) as in coping, grouting, finished even and smooth without using extra cement as on brick work etc including demolition of existing PCC complete all as specified and directed

M&L for DI flange fittings of all flagged Tee, double flaged Bend and DI flange Socket Piece of size 80 to 100mm dia bore including required cutting to existing pipe and connections complete all as specified and directed

Boring holes under Road pavement by Bocky manually in any type of soil up to 200 mm Bore complete all as specified and directed

Schedule of credit amount is NIL

M/s R. K. Bhambri