EAV-13/2025-26

New 11 KV Line Works -

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Competent Authority as per TS.

Erection of ACSR Weasel Conductor (30 mm² Al. Area) as per approved drawings, scope of work and TS.

Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in Soft Rock as per scope of work, approved drawings and TS.

Grouting of 8.5 Mtr/180 kgs PCC Pole for(0.268 cmt) 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Supply & Erection of Stone pad (300x300x75)

Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, DP top channel, top clamp, belting angle, cross bracing, Channel & Clamps, strain plate, 50x8 mm stay clamp, guarding channels, Eye Bolts, back clamps, MS angle, MS flats pole extension channel with welded plate, anti climbing device clamp etc. complete as per TS & approved drawings.

Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply & Erection of 11 KV 5 KN Polymer Pin Insulators

Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.

Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.

Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply & Erection of stay guy insulator (1 Nos.), as per TS

Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set

Grouting stay set 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Supply & Erection of 8 SWG GI wire for Protective guarding as per TS

Supply & Erection of 6 SWG GI Wire for Protective guarding & Earthing as per TS

Supply & Erection of Barbed GI wire 12 SWG

Supply & Erection of PG Clamp suitable for ACSR Weasel/Rabbit conductor as per TS

Supply & Erection of 11 KV danger board

New Distribution Transformer 25 KVA 11/0.433KV

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in Soft Rock as per scope of work, approved drawings and TS.

Grouting of 8.5 Mtr/180 kgs PCC Pole for(0.268 cmt) 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Supply & Erection of Stone pad (300x300x75)

Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, DO fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.

Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply & Erection of 11 KV 5 KN Polymer Pin Insulators

Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.

Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel/ Rabbit conductor as per TS.

Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply & Erection of stay guy insulator (1 Nos.), as per TS

Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set

Grouting stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Supply & Erection of 6 SWG GI wire for earthing as per TS

Supply & Erection of Barbed GI wire 12 SWG

Supply & Erection of PG Clamp suitable for ACSR Weasel conductor as per TS

Supply & Erection of 11 KV danger board

Supply & Erection of 11 KV, 3-Pole, 3-Ph, TPMO Switch as per TS

Supply & Erection of 11 KV, 3-Ph, DO Fuse as per TS

Supply & Erection of 3-Phase, 11/0.4 kV, 25 KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS BIS Level - 1

Supply & Erection of LT Distribution box with suitable rating MCCB for incomer & Kit-Kat fuse for two no outgoing feeder suitable for 25 kVA, Dist1ibution Transformer suitable for pole mounting as per TS

Supply & Erection of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)

Supply & Erection of Earthing complete for T/F neutral, L.A. & Body (3 nos. 40mm dia 3 mtr. Long GI Pipe earthing) with charcol, salt etc as per approved drawing and TS.

Supply & Erection of Earthing complete for T/F neutral, L.A. & Body (3 nos. Chemical pipe earthing including electrode, chemical, with 2000mm long, 50 mm diameter GI pipe, in hard rock locations only. ) as per approved drawing and TS.

Supply & Erection of 1-Core 35 mm2, Al. LT XLPE Cable as per TS

New Distribution Transformer 63 KVA 11/0.433 KV

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in Soft Rock as per scope of work, approved drawings and TS.

Grouting of 8.5 Mtr/180 kgs PCC Pole for (0.268 cmt) 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Supply & Erection of Stone pad (300x300x75)

Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, DO fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.

Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply & Erection of 11 KV 5 KN Polymer Pin Insulators

Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.

Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.

Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply & Erection of stay guy insulator (1 Nos.), as per TS

Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set

Grouting stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Supply & Erection of 6 SWG GI wire for earthing as per TS

Supply & Erection of Barbed GI wire 12 SWG

Supply &Erection of PG Clamp suitable for ACSR Weasel/ Rabbit conductor as per TS

Supply & Erection of 11 KV danger board

Supply & Erection of 11 KV, 3-Pole, 3-Ph, TPMO Switch as per TS

Supply & Erection of 11 KV, 3-Ph, DO Fuse as per TS

Supply& Erection of 3-Phase, 11/0.4 kV, 63 KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS BIS Level - 1

Supply of LT Distribution box with suitable rating MCCB for incomer & Kit-Kat fuse for two no outgoing feeder suitable for 63 kVA, Dist1ibution Transformer suitable for pole mounting as per TS

Supply & Erection of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)

Supply & Erection of Earthing complete for T/F neutral, L.A. & Body (3 nos. 40mm dia 3 mtr. Long GI Pipe earthing) with charcol, salt etc as per approved drawing and TS.

Supply & Erection of Earthing complete for T/F neutral, L.A. & Body (3 nos. Chemical pipe earthing including electrode, chemical, with 2000mm long, 50 mm diameter GI pipe, in hard rock locations only. ) as per approved drawing and TS.

Supply & Erection of 1-Core 70 mm2, Al. LT XLPE Cable as per TS

New Three Phase LT Line AB Cable

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Competent Authority as per TS.

Erection of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting) . as required as per technical specification, approved drawings and scope of work

Supply of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in Soft Rock as per scope of work, approved drawings and TS.

Grouting of 8.5 Mtr/180 kgs PCC Pole for(0.268 cmt) 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Supply & Erection of Stone pad (300x300x75)

Supply & erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.

Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply & Erection of stay guy insulator (1 Nos.), as per TS

Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set

Grouting stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Supply & Erection of 6 SWG GI wire for earthing as per TS

Supply & Erection of Three phase SMC Distribution box with clamps

Supply& Erection of Single phase SMC Distribution box with clamps

Supply & Erection of 4Cx35 SQMM Stranded XLPE Unarmoured Cable, (Al Conductor ) for charging Three Phase DB

Supply & Erection of 2Cx25 SQMM Stranded XLPE Unarmoured Cable, (Al Conductor ) for charging Three Phase DB

Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS

Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS

Supply & Erection of 35 Sqmm PG Clamps as per TS

Supply & Erection of LT Insulation piercing connector 50 -50 sqmm size for phase connection as per TS & approve drawing

Supply & Erection of LT Insulation piercing connector 50 -35/25 sqmm size for DB phase connection as per TS & approve drawing

Supply & Erection of LT Insulation piercing connector 16-16/4 sqmm size suitable for Street light connection as per TS

Supply & Erection Pre-Insulated Compression connectors size 16 sqmm suitable for AB XLPE cable

Supply & Erection Pre-Insulated Compression connectors size 50 sqmm suitable for AB XLPE cable

Service Cable

Supply & Erection of 2Cx6 sqmm Armored service cable

Supply & Erection of 10 SWG G.I Wire

Multi Infrastructure And Engineering Pvt. Ltd. (BID ID -5325306)