Improvement of A T Road by widening with concrete pavers block on both side from junction of ASTC Tini Ali towards Phonidhar Chaliha Road at Ward No. VI, VIII, IX, XI and X of Sibsagar Municipal Board under NCAP

Amount

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirments of lines grades and cross-sections and transporting to the embankment location with a lift up to 1.5 m and lead up to 1000 m as per Technical Specification Clause 302.3.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification Clause 401

WBM Grading 2, Using stone screening Type-B 11.2 mm for Gr. II Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the requires density grading 2 as per Technical Specification Clause 405.

WBM Grading 3, Using stone screening Type-B 11.2 mm for Gr. III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the requires density grading 3 as per Technical Specification Clause 405.

ICBP Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot appllied thermoplastic compound 2.5 mm thic including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusiv of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specification

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mm x 125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/ 3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician).

SIGN BOARD

HITESH DUTTA

KESHAB GOGOI

BIPIN BORUAH

A.B.J Enterprise