REPAIRS / REPLACEMENT OF GATES, FENCING, SIGN BOARDS, HARD STANDING AND MISC WORKS AT VARIOUS LOCATIONS UNDER GE (I) R nd D (WEST), BENGALURU

Amount

Dismantling of unserviceable sign boards of any type / description including frame work, fixed over gates, columns, walls, etc., complete all as directed.

Demolition of Brickwork or stone/block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and disposing of debris outside MD land complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) as in ground floors and pavings, not exceeding 15 cm thickness (below or above ground level), disposing of debris outside MD land complete all as specified and as directed.

Demolition of cement concrete un-reinforced of any description and in any position; including reinforcement cut as required to facilitate demolition, and disposing of debris outside MD land complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position; including reinforcement cut as required to facilitate demolition, and disposing of debris outside MD land complete all as specified and as directed.

Dismantling posts or struts (RCC / STEEL / WOOD) any section in Concrete, brick work masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified and as directed. Note : Excavation required will be measured separately under respective item.

Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance not exceeding 50 m and making good surface

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, for shafts, wells, cesspits, manholes, pier holes, laying of pipes, cables, etc. not exceeding 10 sq m on plan and getting out in hard / dense soil complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide, exceeding 1.5 m and not exceeding 3 m in depth; for foundation, for shafts, wells, cesspits, manholes, pier holes, laying of pipes, cables, etc. not exceeding 10 sq m on plan and getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in with excavated soils, including spreading, leveling, watering and well ramming soil in layers not exceeding 25 cm complete all as specified and as directed

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

Dismantling old drying system, Supply and fixing clothes drying pull it pulley system type, 9 feet, 4 rows kit size 5 feet, weighing 3.1 Kg, and load carrying capacity of 40 Kg, made of aluminium pipes of external dia 22 mm and internal dia of 19.8 mm, channels (with mounted pully system), 24 inch length, Pulley system - Delrin, Rope - 4 mm dia HDPE double core, channel mounting screws - 38 x 8 self tapping as per Easy Dry Systems Limited or techno commercial approved makes in MES.

Material and labour for, Plain Cement Concrete, (1:3:6), type C2 ,using 40 mm graded stone aggregates as in foundation concrete including necessary formwork if required complete all as specified and as directed.

Material and labour for, Plain Cement Concrete, (1:4:8), type D2 ,using 40 mm graded stone aggregates as in foundation concrete including necessary formwork if required complete all as specified and as directed.

Demolition of existing PCC kerb stone, and providing material and labour for, factory made special shaped precast machine pressed kerb stone using M-25 grade concrete, set in CM 1:6 and disposing off rubbish outside MD land complete all as specified and directed.

Material and labour for, Reinforced cement concrete (1:2:4) type B1, using 20 mm graded stone aggregates, as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for, Reinforced cement concrete, (1:2:4) using 20 mm graded stone aggregates, as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for, Precast reinforced cement concrete (1:2:4), type B1, using 20 mm graded stone aggregates as in cover slabs for manholes, gully traps, drains and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement bars will be measured and paid under respective items.

Material and labour for, Plain Cement Concrete, (1:2:4), type B1 ,using 20 mm graded stone aggregates as in coping including necessary forms and moulds, finishing the surfaces fair and even, complete all as specified and as directed.

Material and labour for, Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for, Brickwork with sub class ‘B’ bricks, built in CM 1:4, straight or curved on plan exceeding 6 m mean radius etc., complete all as specified and as directed

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finishing the surfaces fair complete all as specified and as directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions and finishing the surfaces fair complete all as specified and as directed.

Material and labour for, TMT steel bars of 10 mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and directed.

Material and labour for, TMT steel bars of 8 mm dia and over, as in stirrups, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and directed.

Taking down unserviceable barbed wire fencing of any description and in any position, Supply and fixing new Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. Note : Each line wire to be measured.

Taking down unserviceable chain link fencing and supply and fix new Chain-link fencing with MS galvanized wire dia not less than 2 mm, 1 mm thick PVC coated, mesh Size 75 mm x 75 mm fixed to fencing post with nut ,bolt ,MS washer and flat iron/angle iron etc., complete all as specified and directed. Note:- Flat iron/angle iron, nut and bolts etc., shall be measured and paid for separately under respective item.

Supply and fix Expanded metal, weighing not exceeding 4 Kg / Sq m, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified and as directed.

Taking down existing chain link fencing of any mesh, size, re-fixing same with and including line wires, rails, straining bolts, nuts, mild steel washers, flat iron, etc., to any type of standards, fencing post etc., complete all as specified and directed. Note:- Flat iron/angle iron, nut and bolts etc., shall be measured and paid for separately under respective item.

Supply and fabrication of mild steel structural work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed. Note:- Flat iron fillets (for securing wire mesh etc., ) will be measured and paid for separately under respective item.

Material and labour as in flats, fillets, etc., drilling holes, bolting or riveting for securing wire mesh, chain link fencing and similar work, steel sections conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

Material and labour for Mild steel, framed work (including fabrications) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe.410-W.Gde-E-250 complete all as specified and as directed.

Supply and fabrication of mild steel framed work such as grills, gratings,ladders, balusters, walk ways, railing, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Fixing only, mild steel framed work such as grills, gratings and similar works of angle or other sections with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors, etc., prepared for hanging or sliding with and including either hooks and hinges or hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete all as specified and as directed.

Supply and fix, one side retro reflective sign boards, made of 3 mm thick coloured ACP (aluminimum composite panel) sheet of make Alstrong / Aludecor/ Alucobond/ Eurobond/ Armstrong as approved by GE, including writing / pasting of words / figures / numbers / logos of any size / pattern & height with self adhesive reflective transparent prismatic engineering grade tape (Radium tape) of approved make complete all as specified and as directed. Note:- i) The words / figure / number / logos, shall be computer aided machine cut, ii) Frame work shall be measured and paid for separately under respective items, iii) Earthwork & excavation / demolition if necessary will be measured and paid for under respective items. iv) Quoted rate shall include for necessary scaffolding, hire charge of cranes etc for fixing of board at required heights.

Supply and fix, two side retro reflective sign boards, made of 3 mm thick coloured ACP (aluminimum composite panel) sheet of make Alstrong / Aludecor/ Alucobond/ Eurobond/ Armstrong as approved by GE, including writing / pasting of words / figures / numbers / logos of any size / pattern & height with self adhesive reflective transparent prismatic engineering grade tape (Radium tape) of approved make complete all as specified and as directed. Note:- i) The words / figure / number / logos, shall be computer aided machine cut, ii) Frame work shall be measured and paid for separately under respective items, iii) Earthwork & excavation / demolition if necessary will be measured and paid for under respective items. iv) Quoted rate shall include for necessary scaffolding, hire charge of cranes etc for fixing of board at required heights.

Material and labour for, hollow stainless steel frame work for sign boards, using stainless steel sections of grade SS - 304, including bends, elbows, etc., necessary welding and fixing arrangement, complete all as specified and as directed.

Material and labour for, mild steel frame work for sign boards, using mild steel sections of grade E-165, including bends, elbows, etc., necessary welding and fixing arrangement, complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in sub-bse, pavings, hardstanding, etc., finishing surfaces of concrete fair and to receive tiles, complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in pavings / plinth protection laid in panels, and joints filled with bitumen and sand mixed in 1:3 by weight, finishing the surfaces even and fair complete all as specified and as directed.

Demolition of stone slabs of any thickness and in any position, providing material and labour, plain cement chequered concrete tiles 30 cm x 30 cm x 20-22 mm thick, with pigments, set, jointed and pointed in neat cement slurry in floor including 20 mm thick screed bed in cement mortar 1:6 with grey cement and pigments complete all as specified and as directed..

Demolition of stone slabs of any thickness and in any position, providing Machine pressed rubber moulded (laminated), topping thickness not less than 5 mm, in white cement and non fadable glossy pigment, precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50 mm thick, sand filling as in sand cushioning to interlocking paver tiles, watering and consolidating complete all as specified and as directed.

Demolition of stone slabs of any thickness and in any position, providing Machine cut Kota stone slab 20 mm - 25 mm thick as in flooring, over and including screed bed in cement mortar 20 mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of stone slabs of any thickness and in any position, providing material and labour, for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4), complete all as specified and as directed.

Demolition of existing tiles, and providing material and labour, for DIGITAL elevation tiles, (Make : Kajaria or technocommercial equivalent in Orient / Somany / Johnson) of size 300 x 450 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 15 mm thick in CM 1:4, complete all as specified and directed.

Material and labour, for rendering 15 mm thick in Cement mortar 1:4, on brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement based primer, complete all as specified and as directed.

Preparation of new or previously untreated concrete surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel over a coat of primer, complete all as specified and as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old plastered surfaces of any description and applying one coat of cement based paint complete all as specified and as directed.

Lucky Enterprises

Meghana and Gowda Enterprises

Ravees Enterprises

C R R CONSTRUCTIONS

M/S Suresh Raju

M/S Bhagyawanticonstruction

SREE SIDDESHWARA TRADERS

Aditya Associates