SPECIAL REPAIRS TO BLDG NO. P-87 (SMC) AT GV CAMP UNDER

Demolition of cement concrete (un-reinforced) of any description as in sunken slabs, existing roof treatment any type complete all as specified and directed

M & L for PCC 1:2:4 type B1 using 20mm graded aggregate 40mm thick as in sub base/roof padding concrete in roof etc complete all as specified and directed.

M & L for rendering 10 mm thick in CM 1:3 finished even and smooth using without extra cement and with liquid water proofing compound slab treatment as in sunken slab plaster/roof slab treatment complete all as specified and directed. Note : Water proofing compound measured and paid seperately.

Supply only integral liquid water proofing compound .

Providing and applying HS TPO membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with terminatin strip and fix it by screw at 300 mm c/c and sealed with HS Jointseal PU on top including surface preparation like remove all loose gravels,dirt,oil,grease,and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO completely as per specification and direction.( Note:- work to be carried out by authorities applicator of M/S Asian or equivalent company.)

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above GL) all as specified and directed.

M & L for 25mm thick cement concrete type B-1, 1:2:4 (20 mm grade aggregate) as in levelling course in flooring finished even and fair under floor finishes.

M & L for Double Charged Vitrified Ceramic Colour tiles 9 to 10 mm thick light shade(Square / Rectangular) polished , area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and as directed . Make : Somany, Johnson, AGL, Kajaria

Ditto as item above but as in skirting over cement mortar backing plaster in CM1:3 10 mm thick including dismantling of wall tiling of any thickness ncluding cement mortar bedding ( but not backing) removing tiles and rubbish off the premises.complete all as specified and directed. Make : Somany, Johnson, AGL, Kajaria

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe. Make : Somany, Johnson, AGL, Kajaria

M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces 350 x 250 x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat including dismantling of wall tiling of any thickness ncluding cement mortar bedding ( but not backing) removing tiles and rubbish off the premises complete all as specified and as directed. Make : Somany, Johnson, AGL, Kajaria

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed.

M & L Granite (of any type) tiles 20 mm thick machine cut, laid over cement screed bed 15 mm thick in CM 1 : 4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) tiles machine cut, in skirting , step raising or cooking platform, similar work etc including 10 mm backing coat in CM 1 : 4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed .

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed .

S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

Taking down steel windows completely of size not exc 1.00 Sqm each

Taking down steel windows completely of size exc 1.00 Sqm but nexc 1.5 Sqm each

Taking down steel windows completely of size exc 1.50 Sqm each

S & F Powder coated Anodised aluminium Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. complete all as specified Note : Glass pane and SS wire mesh shall be measured and paid separately in supply only item.

S & F in repairs Brass 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each refixing in same opening resecuring , adjusting including necessary repair shutters/door shutters all as specified and directed

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty including taking down of onld one and fixed . complete all as specified and directed.

S & F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked

S & F in repairs 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed.

S & F Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

S & F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as specified and as directed. Make : Parryware, Nirali, Kajaria sanitary ware,

S & F in repairs CP brass,Sink cock with pipe swinging spout ( wall mounted model ) with wall flange , swan neck tap for kitchen sink,all as specified and as directed.Make : Jaquar (CAT Part No COP-347PM) and equivalent of Hindware. Cera, Parryware

S & F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605 mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling ceiling baords of any description of any thickness incl cover fillets complete all as specified and directed .

S & F PVC waste pipe, 32 mm dia, 750mm long, suitable for Kitchen sink,fixed in repairs all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F in repairs Bib taps, CP brass, fancy type, long body with flange, screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, all as specified and as directed. Make : Jaquar (CAT Part No COP-107PM ), and equivalent of Hindware. Cera, Parryware

S&F in repairs fancy type CP brass angle cock of brass chromium plated with ling shank screwed for pipe and fixed 15mm bore fixed to iron pipen all as specified Make : Jaquar (CAT Part No COP-057PM) and equilent of , Hindware. Cera, Parryware

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ® all as specified and as directed.

S & F in repairs S/S Toilet paper holder with flat recessed type complete all as specified. Make : Jaquar , Hindware. Cera, Parryware

S & F in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm ling between flanges complete all as specified and directed. Make : Jaquar , Hindware. Cera, Parryware

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repairs Mirror cabinet 622x422mm all as specified and as directed.Make : Jaquar , Hindware. Cera, Parryware

S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brakcet guard and railing 60cm long complete all as specified and directed. Make : Jaquar , Hindware. Cera, Parryware

S&F in repair Vitreous china wash hand basin, white, counter top/ flat back of size 580 x 450 mm white excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling 32 mm dia as suitable complete all as specified and directed by the Engr-in-Charge.

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floorcomplete, including fixing of PVC flush tank and seat cover as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

Supply only Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed all as specified and as directed. (Note: Seat cover make should be same as of WC make) Make : Jaquar , Hindware. Cera, Parryware

Supply only PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware.

S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed.

S & F in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S&F in repairs 32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S&F in repairs 40mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted 1000 litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank 1000 litre capacity complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted 500 litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank 500 litre capacity complete all as specified and directed.

S & F in repairs 40 mm outer dia ball/gate valve screewd both ends for CPVC pipes and fixed complete all as specified and as directed

S&F in repairs 32 mm outer dia ball /gate valve for , screewd both ends for CPVC pipes and fixed complete all as specified and as directed

S & F in repairs Ball valves high 25mm bore pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed.

S&F in repairs PVC bends of 110 mm dia complete all as specified and directed.

S&F in repairs PVC bends of 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cementbends of 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) junction (Single T) equal or unequal fixed to 75mm bore of pipes with access door all as specified and as directed.

S&F in repairs PVC (SWR) junction (Single T) equal or unequal fixed to 110mm bore of pipes with access door all as specified and as directed.

S&F in repairs PVC (SWR) vent cowl fixed to 110mm bore of pipes all as specified and as directed.

S&F in repairs PVC (SWR) vent cowl fixed to 75mm bore of pipes all as specified and as directed.

S & F Stainless steel gratings with frame, 100 mm dia, with/without hole for waste pipe connection all as specified and as directed.

M&L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed.

M&L for preperation of newly plastered surfaces of ceilings and applying two coats of oil bound distemper on ceiling surfaces over a coat of alkali resistant primer ocomplete all as specified and directed.

M&L for preperation of old decorated surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, oil and gresy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and directed.

M & L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfaces over a coat of alkali resistant primer complete all as specified and as directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron ) having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over newly plastered surfaces of wall surfaces complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Removing material or debris retrives from above demolition or cleaning to a distance exceed 1.5 Km and not exceeding 5.0 Km and depositing where directed complete all as specified and directed

Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified.

M & L Rolled sections as in main and cross beams, hip and jack rafters; purlins, post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete ll as specified and directed

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.complete all as directed and specified.

Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for two layer (15 mm thick ) Rendering of top layer 5 mm thick with WPC over a 10 mm thick base layer rendering in CM 1:4 on concrete masonary or surfaces other than fair face of brick work finished fair and even without using extra cement.Note WPC shall be measured and paid separetely in supply only item.

M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M& L for rendering 10 mm thick cement plaster in CM 1:3 on fair faces of brick work on concrete surfaces on ceiling including finished even and smooth all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in all as specified

M & L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) in PCC 1:3:6 type C1 using 20mmgarded aggregate and setting in mortar 1:6 complete, in walls complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

M & L RCC Slabs type B1 (20 mm graded aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like cooking platform etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) ® fair finished surface complete all as specified and directed.

M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

M & L for Mild steel TMT bars 6 to 8mm dia and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed

Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane all as specified and as directed

Supply only 4mm thick figured galss, pin head type as in louvers, fixed glazing not exc 0.5 Sqm in each pane

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed.

Taking down carefully copper/aluminum sub main wiring of any size including casing and caping / conduit and making good the disturbed surface of walls as directed.

Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed.

Taking down carefully DB box including mcb, mccb of any size and any type complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as ceiling fittings, bulk head fittings, tube light fitting etc. for reuse at site or carrying to thestore complete all as specified and directed.

Taking down ceiling fan/exhaust fan,sealing cable end,dismantling blades and removing fan and handing over to MES store complete all as specified and directed

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:- (a) One light point /Fan point controlled by one switch.

(b) One 5 Amps socket point on independent board.

(c) All as per item No.06 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .

(d) All as per item No.06 above but wiring complete with 4 Sqmm forAC and Geyser point

(e) One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed

S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed

S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed.

Supply and fixing 35/36 W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free/shadow less homogenous illumination including LED driver complete all as specified.

Supply and fixing 20 W LED Fitting, 1 x 1 recess / Surface LED flat panel with high brightness LED for glare free/shadow less homogenous illumination including LED driver complete all as specified.

S&F Lumiline LED tube with box type fitting , 2 feet, 10 watts alongwith tube complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan

Fixing only exhaust fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan

Suply & fixing Fan Regulator 120W , 2 module complete all as specified and directed.

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge.

Supply and fix ceiling rose suarface bakelite three terminals 65x50mm complete all as specified.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

S & F MCCB DB Vertical TPN 4 way 'A' frame,including MCCB TPN 63 Amp breaking capacity 16 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed.

S & F MCCB DB Vertical TPN 8 way 'A' frame,including MCCB TPN 100 Amp breaking capacity 25 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed.

M & L for sub main wiring complete with four runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. NOTE : Four runs of cable , one run of conduit & one run of earth conductor shall be mweasured as one unit length

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 70 sqmm 3½ core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. NOTE : Eartthwork & excavation, Cable protection & sand cushioning shall be measure & paid seperately

Taking up underground unservicable cable of any size from existing trench including bricks, etc and removing of materials from work site all as directed by Engr-in-charge.

Taking up underground unservicable cable of any size from existing trench including bricks, etc and removing of materials from work site all as directed by Engr-in-charge.

Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete.

Returning, filling IN, including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick each complete all as specified.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified.

Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified. ( Punned thickness shall be measured & paid)

Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified.

M & L for G.I. tubing light grade of size 40 mm bore for protection of cables to be laid under roads, crossings/culverts complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore light gradeGI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron.