WBPWD/AE/DESD /eNIQ-12/2025-26

Amount

Supply of 1.1KV grade 4C x 50 sqmm XLPE insulated Al. armoured cable. Make- Polycab/KEI/RR

Supply of 1.1KV grade 4C x 10 sqmm XLPE insulated Al. armoured cable.Make- Polycab/KEI/RR

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire. a) upto 4C x 50 sqmm

Laying of cable upto 4Cx50 sqmm on wall/surface incl. S&F MS saddles with earthing attachment in 2x10 SWG GI (Hot Dip) Wire, making holes etc. as necy, mending good damages and painting

Laying of one No. cable upto 50 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos. bricks per metre, includingfilling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

S&F of 40mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below a) 4C x 50 sqmm

b) 4C x 10 sqmm gland

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. a) 4C x 50 sqmm

b) 4C x 10 sqmm Alu. sockets

S&F of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. a) 300x50x1.25mm (18SWG) with 25x25x3mm angle iron support

S&F LT Suitable size pillar box complete set including foundation , must be contructed by CPRI approved manufacturer and having the following features as per direction of EIC: a) Box should have both side openable and locking arrangemet. b) Hylum sheet for fixing MCCB, Isolator, Timer DB and other necessary equipments. c) Incomer 100 A 4P MCCB - 1 No, Busbar : 100A capacity with 4 nos copper bar. d) Outgoing : 1no timer box consisting with ML-3 contactor with 32A capacity, analog clock, bypass toggle switch, 32Amp 4 pole MCB- 4nos etc accessiories, danger plate - 1 no, e) Panel should be dust , water and vermin proof, should be properly interconnected with copper wire/ Bar , should be gasketted with Rubber.

Dismantling of old battery and Supply & Installation of new 12V 18Ah Sealed Lead Acid Battery. (Make: Exide, Luminous/Amarraja Model: EP 18-12)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required a) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes of following sizes: a) 2.5 sqmm

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

S&F 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Excavation of soil for installation of Earth Electrode and filling & ramming. (b) Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S& F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: i) By TATA-Medium GI pipe

Connecting the equipments body to earth busbar including S&F 25mmx6mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc

Labour Charges for dismentling old & damaged wiring, boards, plug sockets, panel, removing & refixing cables, shifting furniture for execution of work etc as required.

Add GST @18% On total from item no 1 to 21

Add LWC @1% On total from item no 1 to 22.

SADHAN ELECTRICAL ENTERPRISE (BID ID -6911882)

SASTIK ENTERPRISE (BID ID -6910970)