INTERIOR FURNISHING, RENOVATION, ELECTRIFICATION WORKS FOR LECTURE HALL, LIBRARY AND TOILET BLCOK AT ATAL BIHARI VAJPAYEE INSTITUTE OF GOOD GOVERNANCE AND POLICY ANALYSIS SUSHASAN BHAVAN BHADBADA CHOURAHA BHOPAL

Amount

Providing and Fixing of 12mm Thick toughened plain glass with film on Entrance gate and others doors partly fixed partly open able with necessary 'OZONE' Patch fittings like : Floor Spring FS – 8400,Bottom Door OPF – 3,Door Top OPF – 2,Pivit OPF – 1,Handle OGH - 77,Connector OGC – 44,Lock for Door OPL - 1, which ever is required as per drawing and direction of Engineer in charge including scaffolding, T & P and labour etc. complete in all respect.

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH )

Providing & fixing of plane washable wall paper high resolution including all fittings with wastage.(Spin Décor / marshell / Green)

Table 2000 x 500 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Table 1000 x 600 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Executive Chair-The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards (HAWORTH/ HERMANMILLER /GODREJ/ WIPRO/FEATHERLITE/HOF. MAKE )

Study Chair-The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm, (H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest is fixed . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI /BIFMA x5.1 standards (HAWORTH/HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/ HOF. MAKE )

Libarary Storage Unit- 1. Overall Dimensions: H1980 x W915 x D485mm 2. Material: Prime quality MS CRCA sheets 1.0mm for front, sides and shelves & 0.6 mm for back. 3. No. of shelves: No. of shelves Four forming five compartments. 4. Locking Mechanism: Two way bolting device with six levers superior quality standard make lock with duplicate keys. 5. Pedestal: Made of 1.00mm CRCA sheet. Height 125mm. 6. Doors: 3mm thick glass paneled doors with suitable framework. 7. Hinges: Double folded type hinges made of MS CRCA sheet 1.8mm to 2.0mm. Three hinges for each door leaf. 8. Finish: Glass Door Cabinet shall be powder coated after seven tanks anti corrosion pretreatment. 9. All the accessories shall be superior quality and standard make.

SITC of 4200 Ansi Lumens Projector with technology : Digital Line Processing Min Brightness : 4200 Ansi Lumens Min Contrast Ratio 3000:1 Image Size 0.78 - 9.38m (30.79" - 369.43") Diagonal 4:3 Native resolution : XGA (1024 x 768) Video Compatibility : PAL, Secam 576 i/p NTSC 480 i/p, HD 720p/1080i/1080p Aspect ratio Native 4:3 Compatible 16:9 Power supply 100 - 240V, 50-60Hz. (Make : Optoma/Infocus/LG)

Supply, Installation, Testing & Commissioning of Mounting arrangement for projector.

Supply, Installaton, Testing & Commissioning of Motorised Projector Screen - 8 x 6 Matt White, 220 V Make : Liberty/Suvira/Elite

Supplying, Installation, testing & commissioning of HDMI Switcher with 4 Nos. Of HDMI Input and 4 Nos HDMI Output Make : Aten/Fidelity/Christron

Providing, Laying and Installation of HDMI Cable.

Providing & Laying of 2-core 2.5 sq. mm. Shielded Twisted pair loudspeaker cable. Make : Liberty/Finolex/Lapp

Supply, Installation, Testing & Commissioning of Delegate Unit Long Microphone with Microphone stem length - 313mm (12.3 inch), DC Supply 24V ± 1V typical, frequency response : 125 Hz to 12.5 KHz Make : Bosch / AKG / Honeywell (NOTE:- The bidder shall quote his own rates for Item No. 1 to 16 of Item rate Part.)

Bidder Name

Amount

BONTON TECHNOMAKE PRIVATE LIMITED(GSTN-23AABCB4237A1ZH)

IMPRESSION FURNITURE INDUSTRIES PRIVATE LIMITED(GSTN-NA)

BONTON TECHNOMAKE PRIVATE LIMITED

BONTON TECHNOMAKE PRIVATE LIMITED