Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.4 L+₹79,370 (2.43%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹35.9 L+₹3.3 L (10.1%)Rejected-Finance 122 SAMHARIYA ASOPUR TANDA AMBEDKAR NAGAR UTTAR PRADESH 224190 | AMBEDKAR NAGAR | UTTAR PRADESH | 224190 | L3 | Rejected-Finance L3 | |
| 4 | L4₹36.1 L+₹3.4 L (10.5%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹37.5 L+₹4.9 L (15.0%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹39.0 L
EMD Value
₹78,100
Closing Date
29 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JAIPUR
Garrison Engineer, Military Engineer Services, Khatipura road, Jaipur 302012
ADDN/ALTN OF 50 STABLE AT BLDG NO P-637 to P-641 OF 61 CAVALRY AT ZONE-I AREA AT JAIPUR MIL STN
2022_MES_528175_1
GE/J-06/2022-23
Open Tender
Civil Works
Item Rate
180 days
JAIPUR
As per NIT
5 documents required · 5 mandatory
₹500
GE JAIPUR
₹78,100
Yes
18 Jul 2022
3 Jun 2022
1 Jul 2022
3 Jun 2022
29 Jun 2022
16 Jun 2022
3 Jun 2022 - 15 Jun 2022
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M&L rendering 10 mm thick on ceiling in CM(1:3) finished even and smooth without using extra cement
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement.
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement.
M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6
M&L preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed
M&L preparing new plastered wall surfaces and applying three coats of white wash complete all as specified and directed
M&L preparing old plastered surfaces and applying one coats of cement base paint on wall
Dismentaling Concrete of any description and in any position not otherwise specifically provided for
Excavating in trenches, n.exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sq m on plan and n.exc 1.5m in depth and getting out in soft/loose soil
M&L returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point.
M&L cement concrete in foundations filling and mass concrete 1:4:8 type D-2 using 40mm graded aggregates
S&F 150 mm bore reinforcement cement concrete pipe class NP2 laid and jointed complete with collar all as specified and as directe.
M&L concrete bed in PCC 1:4:8 type D-2 to drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested.
M&L cutting into existing man holes for connecting new drains of 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqd.
M&L precast RCC 1:2:4 type B-1, using 20mm graded stone aggregate for manhole cover including placing over manhole all as specified including demolition of old RCC manhole covers. Note :- Reinforcement shall be measured and paid separately.
M&L Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
Dismantaling of floor hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises.
M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick screed bed in CM 1:6 complete
M&L for Glazed ceramic coloured tiles ( 450 x 300 mm) x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over and including 10 mm thick cement plaster in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for vulcanized rubber stable mat for flooring (13mm - 15mm thick) of 3mpa tensile strength and min 250% elongation at break and weight 18-20 Kg/sqm including fixing on surfaces as specified and directed.
M&L for vulcanized rubber stable mat for vertical surface (8mm-10mm thick) of 3mpa tensile strength and min 250% elongation at break and weight 8-10 Kg/sqm, including fixing on vertical surfaces as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strenght, thickness & size/ shape, made by table vibratory method using PU mould laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as directed.
M & L Tibba Sand filling in floors of horse stables complete all as directed.
Taking up or down steel tubing and connections, 15 mm & removing the same from site complete all as directed
Taking up or down steel tubing and connections, 20mm & removing the same from site complete all as directed
Taking up or down steel tubing and connections, 25mm & removing the same from site complete all as directed
S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as directed
S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as directed
S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as directed
S&F rotational moulded polyethylene water storage tanks of capasity 500 litre double layered, (cylindrical vertical with closed top) hoisted and fixed in position all as specified & directed.
Dismantling water tanks,exc 250 and n.exc 500ltr and removing from site complete all as directed
S&F stop valves, 15mm bore cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F in repair stop valves, 25mm bore cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms
Taking down shutters exc 1.00 Sqm each but not exc 2.00 sqm each & removing from site complete all as directed.
S&F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood ( two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003 complete as directed by Engineer-in-Charge.
S&F 300mm long aluminium anodized alloy aliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and slinding bolts etc.
S&F 150mm long aluminium handles, cast type anodised complete
S&F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete
S&F 100mm butt hinges medium weight cold rolled stainless steel and fixed complete.
M&L for preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of pink primer
Dismentaling of structural steel work as in doors gates but excluding framed trussess etc.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including welding Fe -290 Gde E-165
M&L steel work in tubular shape incl special shapes washer etc complete using ERW or induction butt welded tubes conferming to IS 1161-1979 gde St. 240. as in paddock of horse stable.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface
M&L Cement concrete in foundations, filling and mass-concrete in PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate).
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.
M&L Two coats of synthetic enamel paint (1st quality) over red oxide primer to steel surfaces exc 10 cm in width or girth including preparation of surfaces.
S&F Stainless steel sink (without drainage board) made of stainless steel 1mm thick with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, over all approx size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
M&L for Providing cement concrete in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates) stones, bed plates as directed
M&L for precast cement concrete louvers and jallies, 35 mm thick ( measured solid) including all mouldings but excluding frame type B-0 1:2:4 (12.5 mm graded stone aggregate) set in CM 1: 4
M&L plain cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregates) as in plinth protections , stable ramp finished even and fair complete all as directed
M & L wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth ( metallic hardner will be measured and paid under supply only)
Supply only mettalic floor hardner
Taking down carefully surface aluminum or copper point wiring from exisitng PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into existing concealed conduit and terminated in and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, sockets, fan regulators as required for one light point controlled by one switch.
All as per item No. 59 here-in-before but one fan point controlled by one switch.
All as per item No. 59 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per item No. 59 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into into existing concealed conduit and terminated in and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover one socket point 16 Amps controlled by one switch.
S&F switch piano flush button single pole one way 6 Amp complete.
S&F switch piano flush button single pole one way 16 Amp complete.
S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.
S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.
S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete.
S&F ceiling rose 3 plates polycarbonate body complete.
S&F in repair LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 115 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete Make : Cat part No. Philips- BN 308C LED 205-6500 L120 PSU WH or equivalent as approved by GE
M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth Wire 4.0 mm dia , by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point , PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore medium grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.
Taking down MCB distribution boards with incoming and out going controls, any make, any size & removing from site complete all as directed
S&F MCB distribution board, TPN, 4 ways, 415 volts powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as directed
S & F MCBs SP, 6 to 32 Amps of 'C' series having breaking capacity 10 KA ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs complete all as directed
S & F MCBs SPN, 40 tp 63 Apms of 'C' series having breaking capacity 10 KA ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs complete all as directed
Supply and fixing miniature circuit breaker (MCB) TPN, 40 to 63 Apms, 415 Volts, 10 KA 'C' curve and current carrying capacity in the DB complete with connection testing and commissioning complete all as directed
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size & length complete all as directed Make : Cat part No. Philips-WT 202W LED GS PSU S2 PC or equivalent as approved by GE
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil complete all as directed
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as directed
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete. (Punned thickness of 18cm will be measured for payment puspose)
M&L for bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete
Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed.
S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm nominal cross section 4 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store
Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality, renewal of ball bearing (2 Nos in each fan) including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.
Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.
Renewal of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required.
M&L for painting of ceiling fan of any sweep and make with two coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc
Renewal of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.
Renewal of PVC canopy suitable for ceiling fan of any size and make as required.
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan
Taking down and re fixing Air Circulator fans after minor repair, oiling, nut bolts etc of 230 volts single phase oscillating 600 mm sweep suitable for wall mounting complete.
Schedule of Credit
UMA TRADERS
Shiv Construction Company
UNIVERSAL INFRAPROJECT PVT LTD
SAI MAX INFRAPROJECTS
Smita Constructions
JAGDAMBA CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .