REPAIR /MAINTENANCE OF PLASTERED WALL SURFACE AND PERIODICAL SERVICES, LED TUBE LIGHT AND BULB INCL FITTING AND FIXTURES ,MONOBLOCK PUMP 7.5 HP WITH STARTER AND GI PIPE IN DAD STAFF QUARTERS (LEKHA NAGAR) AT PACHMARHI

Amount

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM 1:6 & top layer of 5mm thick in CM 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)

Supply only Integral water proofing compound

M&L for complete removal of existing treatment & preparation of old cement based surfaces of walls and applying two coat of cement based paint complete all as specified and directed.

Preparation of old surfaces wooden of any description not other described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new surface of cementious surface and applying two coat cement base paint complete all as specified and directed.

M&L bands, straps, supports or stays for rainwater (stack clamp), ventilating pipes , including bolts, if required, hooks (stays), heavy for large gates, hooks and pintle hinges large hasps and staples, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts two way and three ways straps, plate washers and similar articles conforming to Fe-290(Gde-E-165) complete all as specified and directed.

Taking down Tube light fittings any wattage and any typecomplete all as specified and directed.

Fixing only serviciable tube light frame 1 x 36 / 40 / 28 watt box type including minor repair by using serviciable parts of other unserviciable fittings and provision of 3 core copper cable of reqd length from ceiling rose to connector and two Nos of round block as per site requirement complete.

Supply and fixing of CRIST GLASS LED TUBELIGHT (DOUBLE SIDE CONNECTOR) 18 Watt LED tube ultra bright Made of soda glass tube coated with water based silicon adhesive to provide glarefree uniform light distribution with high efficiency long life SMD LED module is mounted on MCPCB with lumen efficacy of 140 lm/w with surge protection upto 3kv for directly mounting on existing T8/T12 FTL complete all as specified and directed. Make Havells Cat NoCRYSTAL1213LEDSTL18WLED865SGLASS,C&S ,Crompton greaves.

Supply and fixing in repair Lamp holder PVC / Polycarbonate type with back plate suitable for battan / angular fittings complete all as specified and directed

S&F LED tube light fitting Lumiline 1 x 18Watt surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver with High efficient long life LED with lumen efficiency of 130 lm/w with view angle 120 degree with white finish ABS end caps with decorative circular coloured fixture size 1150x25x40 for 18W connector block etc. with all assoceries internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75x75mm -2 Nos etc complete all as specified and directed. Make Havells Cat No LUMILINEBS18WLED865PCWH ,C&S ,Crompton greaves..

Supply and fixing LED buld 10 watt lumen 950 lm 6500K in existing unsv CFL of any watt including taking down complete all as specified and directed Make: Havells code No LHLDERHEML8X010 ,C&S ,Crompton greaves.

Supply and fix in repair switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix in repair switch socket combination 2 in 1, 3/5 pin 5 Amps flush type universal complete all as specified and directed.

Supply and fix in repair switch socket combination 2 in 1, 3/5 pin 5 and 15 Amps flush type universal complete all as specified and directed.

Supply and fix in repair socket outlet 2 in 1 , 3/5 pin 5 Amps flush type complete all as specified and directed.

Supply and fix in repair Stepped type electronic fan regulator 230 volts flush type complete all as specified and directed.

Dismantling / taking down old insulator any type and size for 1100 volts grade complete all as specified and directed.

Supply and fixing Pin type porcelain, vitreous white brown or green insulators including one galvanised mild steel spindle, two galvanised iron washers, and one galvanised iron nut, 100 mm height, 65 mm dia for working pressure 1100 volts grade complete all as specified and as directed.

Supply and fixing Shackle type, porcelain, vitreous, white brown or green insulators, including galvanised mild steel straps, washers, insulator bolts, washer and nut, 100 mm height, 115 mm dia, including galvanised mild steel straps, washers, insulator bolts etc suitable for working pressure 1100 volts grade complete all as specified and as directed.

Dismantling / taking down old Aluminium conductor steel reinforced any type and size from steel / PCC poles complete all as specified and as directed.

Supply, fixing / stringing Aluminium conductor steel rainforced of any type and size on existing steel tubular / PCC poles including winding, jumpering with alkathine / PVC pipe etc complete all as specified and as directed.

Taking down old U/S danger notice Plate any type and size complete all as specified and directed.

Supply and fixing Danger Notice Plate of 1.6 mm thick mild steel sheet, vitreous enamelled white with letters in English and regional language, figures and conventional skull and bones in signal red colour and fixed with 2 Nos MS clamp of size 25 x 3mm , bolts and nuts of approved size for LT, 20 x 15 cm size complete all as specified and as directed.

Dismantling and taking down carefully security light fitting of any wattage of existing bldg (peripheri).

13. Supply and fix LED street light 25 W 5700K made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover having Iop opening seperate driver comparment with IP 66 protection and impact resistance of IK07 with lumen efficacy of LED 140lm/w and PC lens with Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal ,with suitable lamp, with provision of GI bracket made out of GI pipe of required size (as per fitting fixing clamp size), clamp, nuts, bolts grounded in wall incl all fixing arrangement complete all as directed.(in building peripheri) Make Havells Cat No ENDURACITYLITEPLATSL25WLED757SASYBOPC ,C&S ,Crompton greaves.

M&L for cross arms , bracing, support clamps and back plates fabricated from structural steel section including nuts bolts, Washers, welding, bending cold or hot, drilled holes for bolts in any shape or size as indicated or directed and inclusive of two coat of aluminium paint over one coat of red oxide zinc chrome primer including removing old unserviceable rusted cross arms etc., complete all as specified and directed.

Preparing existing painted steel surfaces and applying to complete steel surfaces such as MS cross arms, brackets, anticlimbing devices, clamps, nut fixed on PCC poles and passing LT line, with one coat of red oxide and two coats of aluminium paint as specified and directed.

M & L for dismantling and removing the centrifugal pump set monoblock type of 7.5 HP capacity installed at pump house from the pump base / foundation after disconnecting electrical and water pipe line (suction / discharge) connections and keeping aside for testing / chaking motor for serviciability complete all as specified and directed.

M & L for taking out old unserviciable burnt winding of centrifugal motor 7.5 HP capacity, 3 phase, 415 volts, 50 Hz, AC supply and rewinding by using super enamelled copper conductor of existing gauge and size by maintaining existing turn ratio, applying insulation varnish and drying up to specified period to achieve desired insulation value including reassembling of motor after rewinding complete all as specified and as directed.

M & L for assembling centrifugal pump set 7.5 HP capacity after repairing and testing at workshop by technician complete all as specified and directed.

Supply and fixing foot valve for 80mm dia ISI Marked,GI/ CI body, heavy duty having one eng flanged or internal screwed suitable to fix in suction pipe and other side strainer with leather flape and counter weight including all fixing arrengements as new nuts, bolts, washers and gasket including testing complete all as specified and directed .

Taking down old MCCB from existing panel of any capacity

Supply and fixing MCCB 3 pole 415 volts fixed type 63 Amps with breaking capacity 16 KA in the existing panel board including making connections and taking down old U/S MCCB complete all as specified and as directed.

Supply and fixing MCCB 3 pole 415 volts fixed type 125 Amps with breaking capacity 16 KA in the existing panel board including making connections and taking down old U/S MCCB complete all as specified and as directed.

Taking up or down old GI tubing & connection including cleaning for re-fixing or removal to store for 80mm dia complete all as specified and as directed.

Supply, fixing / laying, jointing and testing of GI pipes, medium grade, ISI marked for 80mm dia with all fittings fixed on wall / roof or laid in trenches / floors complete all as specified and as directed for 80mm dia with all fittings complete all as specified and as directed.

GHASI RAM SAHU

MODI CORPORATION

SUBIR KUMAR ROY