PROVISION OF CABLE DUCT AND SHIFTING OF LT CABLES AT COMCEN AND SPECIAL REPAIRS REPLACEMENT OF LIGHTS AT LWS WAREHOUSE (P-14) WITH LED LIGHTS AND CONNECTED WORKS AT MO (KAR) AT NAVAL BASE KARWAR

Amount

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for foundation and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 m deep and not exc 1.5 m wide and getting out including forming bottom surface to required levels/ gradients/ slopes for foundation/ laying of cable etc complete all as specified and directed including taking out existing cable protection brick cover.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in harde/dense soil complete all as specified and directed.

Removing excavated soil material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Surface dressing not exc 15 cm deep and getting out in hard / dense soil complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation & filling in mass concrete complete all as specified and directed.

M & L for precast cement concrete block masonry type C1 1:3:6 using 20 mm graded stone aggregate with solid blocks exc 10 cm in width and setting in CM (1:6) complete all as specified and directed.

M & L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 using 20 mm graded aggregate as in slabs supported on wall complete all as specified and directed.

M & L for formwork (rough finished surfaces) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L for formwork (rough finished surfaces) to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M & L for formwork to soffits of suspended slab such as roof slab, floor slab etc. not exceeding 200 mm thick fair finished complete all as specified and directed.

S & F mild steel TMT bars 10 mm dia & above cut to length, bent to shape required including cranking bending etc TMT bars complete all as specified and directed.

Description all as per item No 14.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and directed.

M & L for filling under floor with moorum / red bajari in floor laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:6 on fair faces of concrete surfaces and rendering is to be finished smooth and even without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick (10 mm + 5 mm) in two layers using WPC on block masonary surfaces in CM 1:4, finished even and smooth (without using extra cement) complete all as specified and directed. NOTE: WPC shall be measured and paid separately under respective item of Sch.

Supply only water proofing compound all as specified and directed.

M & L for cement concrete as in plinth protection type C-2 1:3:6 (using 40 mm graded aggregate) 75 mm thick complete all as specified and directed.

S & F low density poly ethylene pipe 50 mm dia for rain water complete all as specified and directed.

M & L for preparing newly plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of self primer on wall surfaces complete all as specified and directed.

Disconnecting, taking out carefully old serviceable underground LT cable of any description and in any position complete and relaying the same into newly made duct complete all as specified and directed for the following sizes:

LT aluminium conductor cable of size upto 35 Sqmm, 3 1/2 core/ 2 core

LT aluminium conductor cable of size over 35 Sqmm upto 70 Sqmm, 3 1/2 core.

LT aluminium conductor cable of size over 70 Sqmm upto 150 Sqmm, 3 1/2 core.

LT aluminium conductor cable of size over 150 Sqmm upto 240 Sqmm, 3 1/2 core.

LT aluminium conductor cable of size over 300 Sqmm upto 400 Sqmm, 3 1/2 core.

S & F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3 1/2 core / 4 core XLPE, armoured, Al conductor cable of size 10 to 70 Sqmm, 3 1/2 core/ 2 core, indoor/ outdoor type complete all as specified and directed.

S & F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3 1/2 core XLPE, armoured, Al conductor cable of size 70 to 150 Sqmm indoor/ outdoor type complete all as specified and directed.

S & F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3 1/2 core XLPE, armoured, Al conductor cable of size 150 to 240 Sqmm indoor/ outdoor type complete all as specified and directed.

S & F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3 1/2 core XLPE, armoured, Al conductor cable of size 300 to 400 Sqmm indoor/ outdoor type complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75 x 75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, GI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed.

S & F 32 mm x 6 mm, GI earth strip all as specified and directed.

Taking down carefully existing highbay luminaire light fitting of any capacity from ceiling of any height and offering credit to contractor complete all as specified and directed. NOTE: Contractor shall take the old light fittings complete with all accessories such as ballast, starter, capacitor, bulb etc as credit.

S & F in repairs energy saving environment friendly 150 W LED IP65 industrial medium bay luminaire complete all as specified and directed. MAKE: Havells Cat Part No. SAUCERNEOP150WLED75790DLTG or equivalent in Bajaj/ CG/ Philips

M/S SUMEET MADHAV ASNOTIKAR

sanjay prabhu

M/S VERNEKAR AGENCIES

Bidder Name

sanjay prabhu

M/S VERNEKAR AGENCIES

H S krishna Electricals

M/S SUMEET MADHAV ASNOTIKAR