B/R MAINT AND PERIODICAL SERVICES OF ACCNS IN RAKHMUTHI MIL STN AND ITS OUTSTATIONS UNDER GE (SOUTH) AKHNOOR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron filletsincluding embeding in concrete and screwing etc. wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-In-Charge.

All as per srl item No 2.00 above but except mild steel iron ( fixing only). Note : Old mild steel iron sheet of shall be use as retrieved from dismantling under respective item of BOQ.

Preparation of old/ decorated plastered or unplastered surfaces of walls and applying one coat of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/ decorated plastered or unplastered surfaces of ceiling and applying one coat of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/ decorated plastered or unplastered surfaces of walls or AC roof top surfaces and applying one coat of cement paint, of any tint, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old painted wood/ wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old painted steel surfaces of any description except roof top, not otherwise described, over 10cm width or girth including and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge.

M &L for preparation of old surfaces of walls plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion after preparing of surfaces, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls and facia including complete removal of existing treatment and applying one coat of exterior emulsion weather proof paint (Apex paint), complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment, making surface even by filling weather proof putty in small holes, cavaties, cracks and applying two coats of exterior emulsion (Apex paint) over one coat of primer, complete all as specified and as directed by Engineer-In-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Glazed ceramic jointless tiles in vertical surface/ dado, size 350x250x6/7mm thick or 350x450x6/7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/ colour of tiles including laid over 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Non-skid, coloured, ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.

Non-skid, coloured, ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, set and fixing in skirting/ dado or any other vertical surfaces and pointed in white or coloured cement to match and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Non-skid, coloured, ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.

Non-skid, coloured, ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and fixing in skirting/ dado or any other vertical surfaces and pointed in white or coloured cement to match and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, non-skid, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.

Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, non-skid, area of each tiles not exceeding 0.36 Sqm, set and fixing in skirting/ dado or any other vertical surfaces and pointed in white or coloured cement to match and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick,over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 20 mm thick screed bed in CM 1:4 for laying Kota Stone all as specified and as directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick as in riser of steps ,skirting, dado and pillar ,over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 10mm thick plaster in CM 1:3 for laying Kota Stone all as specified and as directed by Engr-in-Charge.

M & L Granite (of any type) work 20mm thick (table rubbed and polished) in steps of staircase,jambs,pilllars and kitchen platform (Single Piece of slab for cooking Plateform) incl Dado/skirting and like in cement mortar (1:4) inclduing pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including 15mm thick screed bed/base in CM 1:4, all as specified and as approved by the GE/Engr-in-Charge. Note- A hole in slab will be drilled for gas pipe after laying.

Chequered cement concrete coloured tiles size 300mmx300mmx20/25mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 laid over and including 75mm thick sub base of Nominal Mix PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, complete all as specified and as directed by Engineer-In-Charge.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), ncluding cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed by Engineer-In-Charge.

M&L for providing 75 mm thick PCC 1:3:6, type C-2, using 20 mm graded aggregates as in plinth protection etc, laid in bays (not exc 2 Sqm each) finished even and fair at top without using extra cement and providing 6 mm wide joint throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight. complete all as specifiedand as directed by Engineer-In-Charge.

Plain cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregate), nominal mix, 40mm thick, as in floors, finished even and smooth without using extra cement and including Glass dividing strips, 3.0mm thick and 38mm wide, as in flooring, complete all as specified and as directed by Engineer-In-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed by Engineer-In-Charge.

M & L for Preparation of old plastered or new plastered surfaces of walls and applying wall care putty 3.0 mm thick, as preparation of surfaces before applying any paint or oil emulsion, complete all as specified and directed

Rendering 10mm thick on bricks or concrete masonry surfaces, on walls, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed by Engineer-In-Charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra lime or cement), complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whiting, preparatory to distempering, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint, complete all as specified and as directed by Engineer-In-Charge.

Sheet glass, 3.0mm thick, ordinary quality and glazing with oil putty or with wooden beadings, fixing in square not exceeding 0.50 Sqm in each pane including hacking out old broken glass fo any description, complete all as specified and as directed by Engineer-In-Charge.

Sheet glass, obscured or frosted, on one side, 3.0mm thick, ordinary quality and glazing with oil putty or with wooden beadings, fixing in square not exceeding 0.50 Sqm in each pane including hacking out old broken glass fo any description, complete all as specified and as directed.

Door seal metallic, powder coated, at least 25mm in wide and 1.0mtr in length with nylon fibre brussels, complete all as specified and as directed by Engineer-In-Charge.

Curtain rod, 20mm dia, mild steel, fancy type, any colour coated with fixing and inlcuing end knobs, clamps, fixing brackets, stops, round rings to hold the curtain, fixing in repairs with wall plugs and screws, complete all as specified and as directed by Engineer-In-Charge.

M&L 18/19 mm thick veenered plywood glued together for cupboard/Almirah , exterior grade, Pre -laminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter all as specified and as directed by Engineer-in-Charge.

M&L external teak wood lipping 6 mm thick fixed with nails for 18/19 mm thick board.

Repairs to balcony/Facia and soffit of chajjas etc by taking down old rendering 15 to 20 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm cm in width or girth incl preparation of suface and two coat of cement base paint /apex as reqd over one coat of primer/scaffolding work upto height of 7.0m complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.

Tubes, 'medium grade' galvanised, 15mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

Old tubes, 'any grade' galvanised, 15mm bore, with all new fittings such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

Taking up or down steel tubing of 20mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.

Tubes, 'medium grade' galvanised, 20mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

Old tubes, 'any grade' galvanised, 20mm bore, with all new fittings such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

Cutting holes in brick walls exc one brick but not exc two brick wall, Superficial area n exc 150 sqcm built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) floor/Nahani trap of 75mm dia outlet, plain with grating including jointing with solvent cement, complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) 'P' or 'S' trap of 110mm dia outlet, including jointing with solvent cement, complete all as specified and as directed by Engineer-In-Charge.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, etc including concrete bedding layer complete including making good to dismantled floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repair, complete all as specified and as directed by Engineer-In-Charge.

Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making good to dismantled/ damaged floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F Plastic water closet seat, of reuired colour as directed for pedestal pan, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device), fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, capacity 10.0 litres and making good to dismantled/ damaged floor/ surfaces, fixing in repair, complete all as specified and as directed by Engineer-In-Charge.

Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, complete all as specified and as directed by Engineer-In-Charge.

Vitreous China urinal, half stall, flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern and flush pipe but including of waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

PVC connections 15mm size with brass nuts of length 450mm, complete all as specified and as directed by Engineer-In-Charge.

PVC connections 15mm size with brass nuts of length 600mm, complete all as specified and as directed by Engineer-In-Charge.

Bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Bib taps, long body, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Bib taps 2-way, long body, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Bib tap, long body, standard of PTMT any colour high pressure screwed for iron pipe and fixed for 15mm bore pirpe, (Minimum weight 15mm-120gms), fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Angle valve/ cock, 2-way, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F angle valve/ cock, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Stop valves (concealed type), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, fixed in repairs, complete all as specified and as directed by Engineer-In-Charge.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 20mm bore pipe, fixed in repairs, complete all as specified and as directed by Engineer-In-Charge.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 20mm dia with iron wheel head, both ends screwed for iron pipe including taking down of old one complete all as specified and directed for following bore of pipes.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 15mm dia with iron wheel head, both ends screwed for iron pipe including taking down of old one complete all as specified and directed for following bore of pipes.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe, fixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed for 15mm bore iron pipe (Minimum weight 15mm-90gms) fixing in repair, complete all specified and as directed by Engineer-In-Charge.

S&F Chromium plated shower rose 150mm square size, fancy type, fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair waste pipe for SINK/WHB/Urinal for 32/40mm dia all as specified & as directed.

S&F in repair Chromium Plated stainless steel towel rail 20mm dia 'D' type 60 cm long between flanges fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Tubular towel ring 20mm dia, brass chromium plated, universal type, including end brackets, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc . All as specified.

PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-In-Charge.

S & F PVC SWR 75mm dia ( pressure not less than 6 kg /cm2)pipes in any length fixed to walls with PVC/MS holder but clamps and conforming to IS-1729 complete all as specified and directed.

PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-In-Charge.

S & F PVC SWR 110mm dia ( pressure not less than 6 kg /cm2)pipes in any length fixed to walls with PVC/MS holder but clamps and conforming to IS-1729 complete all as specified and directed.

Waste coupling of PTMT (half or full threaded) for 32mm bore/ 40dia of discharge pipe used for wash hand basin and Sink etc, complete all as specified and as directed by Engineer-In-Charge.

Centre hole basin mixture for hot and cold water, chromium plated, with round sport without pop up waste system for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. Make: Cat Part No-F1013451 of Cera/ Jaquar/ Parko/ Hindware.

S & F CP Brass wall mixer with provision for overhead shower arrangement with 115mm long bend pipe on upper side,for mixing hot cold water supply screwed down incl connecting legs,CP Extension nipple & wall flanges for iron pipe 15mm dia bore fancy type in repair complete all as specified and directed. Make-Jaquar Make-SOL-6273UPR.

S&F Soap dish, fancy type, fixed to plugs with chromium plated brass screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F Glass corner shelf, made with 6 to 8mm thick transparent glass, three teirs including anti rust screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified

S&F Toilet paper holder, fancy type and chromium plated, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F Stainlees steel grating, chromium plated, size 125mm, heavy duty, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Providing and fixing Single piece water closet snow of white (66CM X 35CM X 71CM) universal type viterous china wash down water closet pan , incl soft closet cover finished with 'S' trap of 30CM disatnce (Green Bldg Certificate) with 10 ltrs flushing cistern with twin flush system, complete all as specified and directed by Engineer-In-Charge. Make : Cera Model No CLAIR or Equivalent makes in Jaquar/Kerovit

Sheet glass shelf assembly, consisting 5.50mm thick sheet glass, 120mm wide including anti rust screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S & F bathroom mirror cabinet 400 x 500mm fixed to wall including complete accessories. Make : Prayag CAT No - 554/Equivalent.

Rotational moulded polyethylene water storage tanks of 1000 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-in-Charge.

Rotational moulded polyethylene water storage tanks of 500 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-in-Charge.

M&L for Cleaning and removing all scale and dirt, etc, from 500 Ltrs tanks and from mouths of circulating pipes,etc complete all as specified and as directed by Engineer-in-Charge

M&L for Cleaning and removing all scale and dirt, etc, from 1000 Ltrs tanks and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-Charge

S&F ball valve/ float valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia bore. Make-Prayag, Shakti, Jainko.

S&F ball valve/ float valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball 15mm dia bore. Make-Prayag, Shakti, Jainko.

S&F Water storage tank lid, PVC lid , suitable for rotational moulded polyethylene water storage tanks of 500 liters capacity, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F Water storage tank lid, PVC lid , suitable for rotational moulded polyethylene water storage tanks of 1000 liters capacity, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F Sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Plate rack (kitchen stand) stainless steel, size 780x900x250mm, thickness of stainless steel sheet not less than 0.80mm, weight not less than 7.50Kg each, fixing by means of electrical drill machine, fasteners and screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Plate rack (kitchen stand) stainless steel, size 600x750x250mm, thickness of stainless steel sheet not less than 0.80mm, weight not less than 7.50Kg each, fixing by means of electrical drill machine, fasteners and screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

M & L for 12 mm thick ply wood, grade BWP type BB fixed with screws to timer frame work such as kitchen cabinet including self drawer, shutter, partitions, etc all as directed.

M & L for SS Plain basket of size 370mmx485mmx150mm with 6mm rod thickness complete of superior quality all as directed.

M & L SS Cup saucer basket of size 370x485mmx100mm with 6mm rod thickness complete fixed to receive shutters in loose position SS of grade AISI 304 complete all as directed.

M & L SS cutlery basket of size 370x485mmx100mm with 6mm rod thickness complete fixed to receive shutters in loose position SS of grade AISI 304 complete all as directed.

M & L SS Thali basket of size 370x485mmx200mm with 6mm rod thickness complete fixed to receive shutters in loose position SS of grade AISI 304 complete all as directed.

S & F ball bearing drawer channel 550mm black powder coated for sliding drawers complete all as directed

S & F magnetic catches for cabinet of size 50mm complete with striking plate and magnetic studd complete all as directed

S & F square hollow section SS of grade AISI 304 complete all as directed.

S & F SS soft close kitcken door auto hinge of grade ISI 304 complete all as directed.

S&F 125mm dia oval shape brass handle fancy type bright finish complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each, complete all as specified.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each, complete all as specified.

Taking down shutters of any descriptions area exceeding 1.00 Sqm but not exceeding 2.00 Sqm, complete all as specified and directed by Engineer-In-Charge.

S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S &F powder coated aluminium Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,door seal at bottom,anodised aluminum snap beading screws etc.(thickness of powder coating should not less than 50 micron) complete all as specified.

S & F aluminium powder coated Anodised aluminium window ( including glazed and skelton shutter ) and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.)suitable handle (1 no.) (thickness of powder coating should not less than 50 micron) complete all as specified and as directed by Engineer-in-Charge.

Door closer, aluminium extruded body section, hydraulically regulated, designation No-01, universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Brass mortice lock, vertical type, size 100 mm, 4-levers fixing in repair, complete all as specified and as directed by Engineer-In-Charge.

Mild steel square bar framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staging for of water tanks, cooler stand and similar work conforming to Fe-290, Gde-E-165, including cutting and welding, complete all as specified and as directed by Engineer-In-Charge.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 125x60mm, complete all as specified and as directed by Engineer-In-Charge.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 105x60mm, complete all as specified and as directed by Engineer-In-Charge.

Factory made, plain framed, paneled shutter (two panel) 35mm thick, 2nd class hardwood with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed by Engineer-In-Charge.

M&L Flush shutters 30 mm thick,for door solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by Engineer-In-Charge.

Glazed and skeleton shutters in second class hardwood, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats including 0.56mm nominal dia of wire cloth with average width of aperature 1.18mm fitted with staples etc, complete all as specified and as directed.

Factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and glass sheet 3.0mm thick, 4mm thick frosted glass jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD/1517/15, sheet No- 1/3 to 3/3 and as directed by Engineer-In-Charge. Note :- Cost of all items/elements eleborated in the specification and in Drawing shall be deemed to inlcude in quoted rate.

Factory made steel Ventilator, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and glass sheet 3.0mm thick, 4mm thick frosted glass jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD/1517/15, sheet No- 1/3 to 3/3 and as directed by Engineer-In-Charge. Note :- Cost of all items/elements eleborated in the specification and in Drawing shall be deemed to inlcude in quoted rate.

Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing in SSR, complete all as specified and as directed.

Butt hinges, size 100mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engineer-In-Charge.

S&F 100 mm long mild steel butt hinges, medium weight cold rolled and fixed in repair complete all as specified

Aluminium handles, cast type, anodised, size 150mm, complete all as specified and as directed by Engineer-In-Charge.

Aluminium handles, cast type, anodised, size 150mm, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed, complete all as specified and as directed by Engineer-In-Charge.

Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Aluminium anodised, barrel tower bolts of extruded Section, size 200mm long and fixed fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Aluminium alloy, anodised, sliding door bolt, size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Aluminium alloy, anodised, sliding door bolt, size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed by Engineer-In-Charge.

Aluminium alloy, anodised, sliding door bolt, size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, cverall length of cover plate 140mm, fixed in floor, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed by Engineer-In-Charge.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs, complete all as specified and as directed by Engineer-In-Charge.

Resecuring or easing and adjusting with out taking down shutters of any descriptions, area exceeding 1.00 Sqm but not exceeding 2.00 Sqm and re-fixing in the same openning, complete all as specified and as directed by Engineer-In-Charge.

Resecuring or easing and adjusting with out taking down shutters of any descriptions, area not exceeding 1.00 Sqm re-fixing in the same openning, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified and as directed by Engineer-In-Charge.

S& F Hasp and staple 100 mm long safety type of aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw as a cupboard locker all as specified and as directed .

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed by Engineer-In-Charge.

Cement sheeting, grey, 6mm thick, non-asbestos, corrugated or semi-corrugated sheets in roofs, walls etc., walls etc, fixed with 'L or 'J' type hooks or cranked hook bolts, complete all as specified and as directed by Engineer-In-Charge.

Non-asbestos cement two piece plain angular ridge 6mm thick, serrated ridge for corrugated or semi-corrugated sheets, fixed with 'L or 'J' type hooks or cranked hook bolts, complete all as specified and as directed by Engineer-In-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including any pattern roof coverings, complete all as specified and directed by Engineer-In-Charge.

Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed by Engineer-In-Charge.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-In-Charge.

Description all as per serial item No- 156.00 here-in-before but except Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-In-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed.

Providing and fixing Ceiling board of 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, and hangers 6mm dia, galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 4.0mm dia, length as required at site and expansion hold fasteners 12.50mm dia, 40mm long incl dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed by Engineer-In-Charge.

Providing and fixing solid PVC wall lining/panelling consisting of 5mm thick prelaminated wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame incl dismantling of wall lining and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed by Engineer-In-Charge.

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-In-Charge.

Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan exceeding 6.0mtrs mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.

Description all as per srl item above but except bricks.

S&F stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw all as specified and directed.

S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain including brackets and knobs complete all as specified and directed.

Plain cement concrete M-15(1:2:4), type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and as directed by Engineer-In-Charge.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of colour wash complete all as specified.

M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper (any tint) complete all as specified.

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint on Over Head Water Tank upto 18.00 mtr height of any tint to match existing shade of walls complete all as specified.

M &L for preparation of old surfaces of walls plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather proof exterior emulsion paint (Apex or equivalent), complete all as specified and as directed by Engineer-In-Charge.

M & L for complete removal of existing treatment applying two coats of 100% Premium acrylic emulsion paint, UV Resistance, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) and including priming coat of exterior primer all as speicfied and directed.

M & L for Preparation of old plastered or new plastered surfaces of walls and applying two coats of wall care putty, as preparation of surfaces/grinding of surafce as required before applying any paint or oil emulsion, complete all as specified and directed

M & L rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement.

M&L for rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement.

M & L preparing new plastered or unplastered surfaces of Ceiling and applying three coats of white wash.

M & L for applying two coat of cement base paint different colour in different shape in camouflage pattern to match the existing colours on new plastered surface of wall all as specified.

M & L Preparation of new plastered and unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint, UV Resistance, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) and including priming coat of exterior primer over new surfaces all as speicfied and directed.

Amount of Schedule of credit of for Rs 91,289.62 shall be deducted from quoted amount.

M/s Vishal Engineers (BID ID -3164769)

KRISHNA BUILDERS (BID ID -3160745)

d d builders (BID ID -3160901)

RAMA CONSTRUCTION COMPANY (BID ID -3160788)