PROVN OF TOILET BLOCK IN TRG AREA OF 5682 ASC BN (MT) AND LPG STORE BEHIND COOK HOUSE OF 102 INF BN (TA) PUNJAB AT MIL STN KALKA UNDER GE JUTOGH

Amount

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5m in depth for foundation etc. and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc. 1.5m above the starting point in soils complete all as specified and directed.

M & L for PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.

M&L for RCC 1:1.5:3, Type A-1, using 20mm graded crushed stone aggregate as in foundation of coloumn footings, plinth beams, bases for columns , basement slabs etc. complete all as specified and directed.

M&L for RCC 1:1.5:3, Type A-1, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts & struts complete all as specified and directed.

M&L for RCC 1:1.5:3, Type A-1, using 20mm graded crushed stone aggregate as in beams cantilevers bressumers lintels over 1.5 m span etc. complete all as specified and directed.

M&L for RCC 1:1.5:3, Type A-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC 1:1.5:3, Type A-1, using 20mm graded crushed stone aggregate as in chajjas/ shelves etc. complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation and plinth beams and similar work vertical or batter for rough finish surface complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns & stanchions incl fair finishes of surfaces complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, n. exc. 200m thick (Horizontal or sloping) rough finish surface complete all as specified and directed.

Use and waste of form work to sides & soffits of floor or roof beam beam haunchins girders bressumers lintels cantilevers shelves including over hang supports etc. rough finished surface complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas trough and similar items complete all as specified and directed.

M&L for 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirmining complete all as specified and directed.

M&L for 6 to 8mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirmining complete all as specified and directed.

M&L for 5mm dia and over up to 10mm dia TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirmining as in strirups, spacers and binders etc complete all as specified and directed.

M&L for brick work with Sub class 'B' brick straigth or curved on plan exc. 6m mean radius built in cm 1:6 complete all as specified and directed.

M&L 40mm thick Damp proof course horizontal surfaces incl necessary form work in PCC (1:2:4) type B-0 (using 12.5 graded crushed stone aggregate) mixed with and including water proofing compound as per manufacturers recommendation complete all as specified and directed.

M&L for rendering 15mm thick in cm (1:4) on fair faces of brick work or concrete surfaces finished & even and smooth mixed with and including water proofing compound as per manufacturers recommendation complete all as specified and directed. Note : WPC will be measured and paid separately.

M&L for rendering 15mm thick in cm (1:6) on other than fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for rendering 5mm thick in cm (1:3) on fceiling surface is to be finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L hard core broken stone boulders of guage not exc. 63mm deposited spread & levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggreate) as in plinth protection, the plinth protection shall be laid in alternate bays, laid in slope, including finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper including priming coat on plasterred surface complete all as specified and direceted.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and direceted.

M& L for preparing new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F 100 mm long medium weight mild steel but hinges complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section hinges complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 350X250X7mm/ 450X350X7mm thick, as on vertical surface of wall in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles fixed over and incl 10 mm thick plastering in CM 1:4 complete all as specified and directed.

.M & L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F, vitreous China wash hand basin, white, flat back size 550 x 400mm including 32mm CP waste coupling and HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F Vitreous China squatting pan, ORISSA patteren of size 580x440mm white with integral foot rests, excluding flushing cistren and flush pipe complete all as specified and directed.

S&F Vitreous China floor mounted elongate shape western type EWC of size 170x390x360mm white with 'P' or 'S' trap, front or back inlet and excluding flushing cistern and flush pipe complete all as specified and directed.

S & F for 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S& F vitereous china bowl urinal flat back size of 465x355x235 mm white (minimum) with grating and union for discharge pipe (excluding flushing cisteran flush pipe and waste pipe) back or corner wall type complete including providing and fixing plugs bedding urinal againest wall in cement mortar 1:2 securing urinal to plug with and including 60 mm long brass screws pointing around urinal back in cement fixing with brackets flush pipe grating and union for discharge pipe complete all as specified and directed.

S&F towel Rail 600mm long of CP brass fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms), complete all as specified and directed.

S&F bib taps, 15 mm dia, cast copper alloy, chromium plated, fancy type, complete all as specified and directed.

S&F fancy type CP stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipes or for unions of 15mm dia complete all as specified and directed.

S&F soap dish, 'oval' type stainless steel approximate size 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT Nuts of length 450mm long complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes ingle socketd, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes ingle socketd, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F salt glaged stoneware gully trap 125x100mm type P setting and jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) bends with oval access door 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends with oval access door 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends plain 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends plain 75 mm bore complete all as specified and directed.

S F PVC (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 15 mm bore water tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20mm bore water tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 500 litre capacity rotational Moulded polyethylene water storage tank three layer (cylindrical or vertically with closed top) hoisted and fixed in position all complete all as specified and directed.

S&F ball valve 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight - 2 1 0 g m s complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement mixed with and incl water proofing compound of approved make as per manufacturers instructions complete all as specified and directed.

M & L for cleaning of roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M & L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/Sqm (b) M & L applying bitumen @1.20kg/Sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /Sqm reinforced with polyester non woven fabric weight not less than 150gm/Sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed (d) Applying one coat of aluminium paint @ 0.2 kg/Sqm

M&L for providing concrete bed to 150mm dia drain pipe in PCC 1:4:8 type D-2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested including necessary earth work complete all as specified and directed.

S & F 150mm bore salt glazed stoneware drain pipes Grade 'A', laid in trenches and jointed in cement and sand mortar 1:1 complete all as specified and directed

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

M&L for Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of BOQ').

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggreate as in floor finishing the surface even & smooth without using extra cement complete all as specified and directed.

Supply only glass dividing strips 3mm thick 38mm wide complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F 0.63mm thick mild steel plain, black sheet in hearths; covering to door shutters; covering to door chowkhats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams, including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete including taking down all as specified and directed.

S & F steel window of profile rectangular tube section with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with galzing bars dovetailed or welded complete all as specified and directed.

S & F steel window of profile rectangular tube section with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without galzing bars dovetailed or welded complete all as specified and directed.

S&F 3 mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M & L for machine pressed precast interlocking paver block of any size any shape conforming to IS -15658 - 2006 of 80mm thick, M-40 Grade, with grey cement and pigment set over sand cushining as required complete all as specified and directed.

M&L for precast cement concrete curved stone 1:3:6, type C-1, using 20 mm graded crushed stone aggregate, laid continuous set in cement mortar 1:4 as in edging laid on end vertically including necessary earth work and excavation in any type of soil and tamping earth around the block and removal of surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires complete all as specified and directed .

One light /fan/bell point controlled by one, switch complete all as specified and directed .

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed .

One 5 pin 5/6 Amp socket on independent board complete all as specified and directed .

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 2.5 Sqmm complete all as specified and directed .

S & F switch piano type 240 V, 6 Amp , single pole one way flush type complete all as specified and directed .

S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified and directed .

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed .

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed .

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder pvc body with back plate complete with and incl 9/10 Watt LED lamp complete all as specified and directed .

S&F sheet metal enclosures for MCB distribution board SPN 8way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed .

S&F MCB SPN 06 to 40 Amps 240V incl all termnials, fitting etc complete all as specified and directed .

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc complete all as specified and directed .

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-5 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed .

S&F exhaust fan heavy duty, MS body, 300 mm sweep, 900 RPM including fixing arrangement with fastner, nut , bolt, washers etc complete with louver shutters and making opening in wall of suitable size including making good to the disturbed surface of wall complete all as specified and directed. Make: Usha Model :AEROCLEAN PLUS/ CROMPTON: TRANS AIR/ BAJAJ

S&F LED Mirror Light 10 Watt with diffuser, Decorative type, complete all as specified and directed . Make :- CG cat part no. LCL-10-CDL & equivelent in Phillips/Havells/Bajaj/Polycab .

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings complete all as specified and directed . Make : Havells Cat part No ENDURALINEARNEOBS20WLED840SPCWH/ Polycab Cat part No LDO0103023/ Crompton cat part No LCCLB-24-CDL/ Bajaj Cat ref BCLSBAL 20W CW.

Supply, Laying and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core , complete all as specifed and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40 mm dia confirming to IS , approved colour complete with fittings for cable protection complete all as specifed and directed.

m/s jupiter builders

AAR PEE ENTERPRISES

M/S Jaswant Kumar Aggarwal