Jaitu Rural

Amount

5.2 (i)/Carriage of Material Jallalabad Sand Lead upto 70 km 0 km to 70 km

5.2 (i)/Carriage of Material Pathankot Sand Lead upto 270 km 0 km to 270 km

4.1 + 5.2/Carriage of earth and Stone sand, earth, fly, ash, bajri, shingle, spals, brick blast etc.

8.5(b)/Dismantling brick work tile masonary or tile lining.

9.8/Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

10.21/Reinforced cement concrete M-20 mechanicaly batch mixwd using batch type concrete mixer as per IS 1791 & vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

15.67/Cement pointing 1:2 flush on flat brick flooring

16.7/Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

16.13/Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade.

17.10(xvii)/Hollock wood doors and window including iron hold fast, corner straps, hinges, screws chocks, cleats, stop and chords etc. but excluding chowkhats complete fixed in position

18.18/Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

18.24/Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter

19.2/Dressing side slopes and preparation of sub grade for lining.

19.15/Extra allowence for scaffolding for side slopes only

Compaction :-- 24.5/(b) (i)/Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing but excluding cost of rolling.

(b) (ii)/Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

28.24/Supplying and laying CI Specials as per IS:1538 complete as desired by Engineer-in-charge confirming to ISI specifications. (a)/CI Specials upto 300 mm i/d

28.27A/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (a)/80mm i/d Sluice Valves flanged

(b)/100mm i/d Sluice Valves flanged

28.31/Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. A/Class PN-1.0 as per ISI with rubber Flap (b)/ 100mm i/d Non-return valve

28.51/Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- (a)/Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

28.65/CONSTRUCTION OF V-NOTCH HAUDI. (size 1.80 m x 0.90 m) excluding cost V-notch as per standard design & drawings of public health department.

28.90/Supplying, fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

29.26/First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

29.34/Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). A/560 mm i/d RCC manhole cover with frame as per ISI (ii)/Heavy duty

29.36/Providing and fixing RCC manhole covers only A/560 mm i/d RCC manhole cover only as per ISI (ii)/Heavy duty

NS/Providing and placing LDPE Film 250 micron on side slope and in bed including overlapping over 25mm thick mud plaster.

NS/Extra for additional 4mm thick cement plaster in 1:5 on LPDE film on side slope and bed.

NS/Supplying and fixing 150 mm i/d Galvanized iron sheet floating arm of 2.60mtr with Sluice Valve complete.

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect. (a)/Top Layer

(b)/2nd to Bottom Layer

NS/Providing and fixing Aluminium Ladder

NS/Provision for Plinth Protection for OHSR

NS/Providing and fixing New Expansion Joints for OHSR

NS/Repair of Expansion Joints for OHSR

NS/Providing and fixing Railing for OHSR

NS/Repair of Pump Chamber Roof & Floor

NS/Providing and installing a clear water horizontal centrifugal pumping set confirming to IS 1520-1972 with latest amendments capable of delivering 5.10 lps against head of 35m and coupled with a 3-phase 3.75 kw (5.00 B.H.P.) electric driven motor fitted on a common base plate complete in all respects including control pannel at New water works site

NS/Repair of Raw Water Motor and Pump of 3.00 BHP

NS/Providing and Fixing New Control Panal

NS/Construction of masonary Gate Pillars including cost of M.S. Steel Gate 1.83 m x 1.41 m complete in all respects as per standard drawing

NS/Construction of Foot Path with masonary toe wall & earth filling inside water works as per drawing D-10 & analysis of rate A-10 of P.H. Deptt. Book

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/Providing, installing, testing & commissioning one no. Electronically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivery pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification. (Make Milton roy)

NS/Painting on Sign Board at Water Works Site.

NS/Credit of old bricks and bats in S&S Tank.

NS/Credit of Old Sluice Valves in Filter Beds.