CWE/FZR-41/2019-20 SPECIAL REPAIR TO BLDG NO NP-17 (OR MD ACCN) OF INF BDE CAMP AT KL ZONE AND BLDG NO P-03/1 TO P-03/8 (JCOS MD ACCN) OF RAJ RIF BN AT NEEL BHAWAN UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegetation, complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L 80 mm thick average, consolidated thickness, mud phuska on flat roofs,including 25 mm thick mud plaster complete all as specified.

M&L for Screeding 10 mm in cement mortar (1:4) brick/concrete surfaces of roof, finished even and smooth without using extra cement etc, complete all as specified.

S&F 150 micron thick (transparent) polythene film with 150mm end & side laps, laid over a coat of bitumen primer @ 0.30 kg to 0.50 kg per sqm, bonded with a coat of 85/25 industrial bitumen @ 1.20 Kg/sqm and laid on roof, complete all as specified.

M&L 40 mm thick brick tiles laid over a layer of 25mm thick mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified.

All as per item No 6 herein before but using old brick tiles retrieved from dismantling (Item No 1 hereinbefore) including cleaning and removal of mortar from tiles, complete all as specified.

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified

Demolition of un-reinforced cement concrete of any description and in any position, complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) complete all as specified.

Dismantling CI pipe alongwith fittings of 50/75/100mm bore, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floor,aprons,etc laid in bedded and pinted in any surfaces complete all as specified and directed.

M&L for 25mm thick PCC type B-0 (1:2:4) using 12.5 mm graded stone aggregate for levelling course of floor, complete all as specified.

M&L for PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation filling and mass concrete, complete all as specified.

M&L for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in 50mm thick plinth protection, surfaces finished even and fair without using extra cement, including provision of construction joints, complete all as specified and directed

M&L for Flush pointing to roof in cement mortar (1:3) including racking out joints brick,complete all as specified.

Excavation in trenches in hard/dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm and getting out,compete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

Demolition and breaking up drain pipes of 150mm dia of pipe(Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar, complete all as specified.

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D-2, complete all as specified.

M&L 150 mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm pipe, complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

Supply only integral water proofing compound ISI marked, complete all as specified.

M&L Preparation of newly plastered surfaces of walls & applying two coats of white wash, complete all as specified.

M&L Preparation of old decorated plastered or unplastered by brooming down with steel wire brush, scarping down smoke soot, mould,moss and efflorescent salts and trading oil, greasy spots and applying two coat of white wash on walls including cornices, pillasters etc, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of 2 mm thick wall care putty, and a coat of primer, complete all as specified and as directed.

M&L Preparation of old decorated plastered or unplastered by brooming down with steel wire brush, scarping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying two coats of oil bound distemper, over a coat of 2 mm thick wall care putty, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of ceiling & applying two coats of white wash, complete all as specified.

M&L Preparation of old decorated plastered or unplastered by applying one coats of white wash on ceiling including cornices, pillasters etc complete all as specified and as directed.

M&L Preparation of new plastered surfaces walls etc and applying two coats of cement base paint over a coat of primer, complete all as specified.

M&L Complete removal of existing treatment and preparation of old plastered surfaces of walls after applying two coats of cement base paint over a coat of primer, complete all as specified.

M&L for Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,making good jambs with plaster in CM(1:4) to match with existing finish, complete all as specified.

All as per item No 38 herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

Taking down door shutter of any description, exc 1 Sqm but not exceeding 2 sqm each and refixing in the same opening after resecuring, or easing & adjusting, complete all as specified.

Taking down door shutter of any description, exc 1 Sqm but not exceeding 2 sqm each, complete all as specified.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified in MES Schedule Part-I (2009), including making good jambs in CM (1:4) with finishes to match with existing, complete all as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site, complete all as per specification in MES Schedule Part-I (2009) & drawing.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

M&L Cement concrete (1:2:4) type C-1 (20 mm graded stone aggregate) as in lintel 1.5 m clear span cills, steps, sesmic and other similar bands, plinth course string courses lacing course, paraphets and railing upto 60cm in height coping kneelers apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified.

S&F Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 9 mm thick B.W.P. commercial ply or 12mm thick BWR grade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24(a) of MES Schedule Part-I section-8 complete all as specified.

S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F partly pannelled and glazed or gauzed shutters 35mm thick 2nd Class HW, divided into Squares with plain, chamfered or rounded,mitred and rebated with sash bars any nubmers, provided with stiles and rails, size at members of shutters as specified in SSR Part I, Sec 8, clause 8.20(a), complete all as specified.

S&F Small articles of 2nd class hard wood (hollock, sheesham wood may be used without financial adjustment), such as hinge blocks, door and window stops, articles not exceeding 200 cubic centimeter each and fixed with steel screws, complete all as specified.

S&F in repair, 300 mm mild steel helical door spring including roller and roller plate complete all as specified.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified.

S&F extruded Aluminium handle, aluminium anodized, 150 mm long fabricated type and fixed with steel screws complete all as specified.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified.

S&F Extruded Aluminium alloy tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified .

S&F in repair, galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified .

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified.

M&L Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, complete all as specified.

M&L Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified.

S&F factory made PVC cup coards/shelfs/partition of required size consisting of panel of 18mm thick Celuka PVC ply and for supporting the hold of shelf/partition and sahft provided 3 edge in size 18x18mm as per required length. The front side of the edge visible in front of the shelf/partition to be edge lipped by the 18mmx1mm width PVC sheet using solvent cement etc, complete all as specified.

S&F extruded Aluminium handle, aluminium anodized, 125 mm long fabricated type and fixed with steel screws complete all as specified.

S&F continious piano hinges mild steel, bright finish or electrogalvanised width of flap 25mm, complete all a specified.

S&F in repairs, magnet catchment of specified shape and size for cupboard selves in kitchen ect, complete all as specified.

M&L for welding in running for thickness of metal to be welded n.exc 6mm, complete all as specified.

S&F Hasp and staple of aluminium anodized, safety type, 125mm long, fixed with screws complete all as specified.

S&F 140mm dia PTMT grating with waste hole of (Minimum weight 50gms) fixed over trap with cement, complete all as specified.

S&F 60 mm thick (M-35 Grade) factory made, machine pressed,precast cement concrete interlocking paver block any shape with grey cement and pigment, confirming to IS-15658:2006, set and joints grouted in fine sand, laid over and including 25 mm thick layer of sand cushioning, complete all as specified and as directed.

All as per item 71 above, but except tiles, complete all as specified and as directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified.

Demolition of reinforced cement concrete in any position, complete all as specified.

M&L precast reinforced cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in cover slab shelves and similar articles and setting in CM (1:4), complete all as specified.

S&F Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia FE-500/550 confirming to IS-1786-1985 all as specified.

S&F Mild steel TMT bars 6 mm to 8mm dia cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends, as in stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete, FE-500/550 confirming to IS-1786-1985 all as specified & directed.

M&L Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

Hacking out old broken glass (any thicknesss, size,quality or description) n exc 1.50 Sqm from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

Dismantling CI pipe alongwith fittings of 50/75/100mm bore, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F 3mm thick, frosted sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

Taking up or down existing steel water tubing, 20 mm bore alongwith connections fixed/laid in any situation, complete all as specified.

Taking up or down existing steel water tubing, 15 mm bore alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised iron steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

S&F Galvanised iron steel water tubing, 15 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

Re-Fixing only, steel water tubing, 15mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors complete all as specified.

Re-Fixing only, steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles, any shape, 7mm to 8 mm thick area of each tile exc 0.06 sqm and not exc 0.11 sqm as in flooring, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6) laid over, complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles, any shape 7mm to 8 mm thick area of each tile exc. 0.11 sqm and not exc 0.18 sqm as in flooring set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6) laid over, complete all as specified.

M&L for Glazed ceramic tiles, coloured ( colour & shade as approved), of size 300x200x7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over & including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

M&L for Kota stone slabs, 20mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:6) including rubbing, cutting and polishing (mirror type) complete all as specified.

S&F Kota stone slabs, 20 mm thick, machine cut as in shelf, skirting,steps,dado,pillars etc, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including rendering coat of 10 mm thick in cement mortar (1:4) including rubbing, cutting and polishing, complete all as specified.

M&L for (table dressed and pre-polished) green marble slab, 18 mm thick of size not less than 1.00 square metre each, as in cooking platforms, steps, jambs, pillars, window cills and like, set and bedded in grey cement slurry over & including 15 mm thick screed in cement mortar (1:4) and pointed in white cement (1:2) with admixture of pigment to match the shade of marble (mirror type polished) complete all as specified.

S&F in repair 15 mm bore bib tap of, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, complete all as specified.

S&F in repair 15mm stop cock cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type), complete all as specified.

S&F in repair 15mm bore pillar tap fancy type, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F in repair Brass chromium plated shower roses 125mm size with or without swivel joints,with shower arm 15 mm dia,195 mm long with bend of 45 degree with flange of CP brass, including fixing to steel pipe or union, complete all as specified.

S&F in repair, 100mm Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified.

M&L for 32mm bore high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm, complete all as specified.

S&F in repairs wash hand basin, flat back 550mm x400mm vitreous china (white) including PTMT waste coupling/fittings, 32 mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing, complete all as specified.

S&F in repair Vitreous china white squatting pan orrissa pattern of size 580mm x 440mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ & 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

S&F Galvanised iron steel water tubing, 40mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors/sunken floors as spout complete all as specified.

S&F in repairs PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

M&L in repair, 2nd class soft wood fillets, sectional area n.exc. 3 sqcm, rectangular in section, wrought finished, fixed with PVC rawl plug & steel screw complete all as specified.

M&L in repair, 2nd class soft wood fillets, sectional area exc 13 sqcm but n.exc.25 sqcm, rectangular in section, wrought finished, fixed with PVC rawl plug & steel screw complete all as specified.

S&F in repair, 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx160mm complete all as specified.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinges,100 mm long and fixed with steel screws complete all as specified.

S&F PTMT handle,125 mm long and fixed with steel screws complete all as specified.

S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified.

Disconnecting existing tanks, 500 litres capacity rotational moulded setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. Measured separately), complete all as specified.

S&F in repair, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F in repair 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified.

S&F Soap Dish stainless steel of type directed, fixed to walls with chromium plated brass screws and wooden/plastic cleats, complete all as specified.

S&F in repair 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy and all other connected works complete all as specified and directed.

M & L tublar Towel Rail 60cm long 'D' type between flanges of aluminium anodized 20mm dia fixed to walls, complete all as specified.

S&F Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm thickness of stainless steel sheet shall be 0.56 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

M&L for applying bond coat of epoxy bonding agent & cement 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additive upto 60 mm thicknes (Chajja's fins,border etc) Note :- (i) Quantity of polymer to used @ 15 % by weight of cement. (ii) Use of electrical mixer to get homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hrs to as required. (iv) Keep the surface moist using water fog for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scafolding for building hieght up to 24 meter complete all as specified and directed by Engineer-in-Charge. Make : Epoxy bonding agent shall be Krishna. Dr Fixit, MC Bauchenie and M/s Chemistim, Sika or Equivalent as directed by Engineer-in- Charge complete all as specified and directed.

M&L for treatment of sunken portion of WCs and bathroom as per following stages: Stage 1:- Demoletion of WC including lime concrete and cement concrete etc and preparing the surfaces of exisiting sunken portion of WCs or bath etc with wire brush to remove all loose dirt,oil grease etc. Stage 2: Providing 10 mm thick plaster in CM 1:4 with chemical of Dr fixit Pidicrete URP or plaster seal of STP Ltd. Stage 3: Applying Dr Fixit Primeseal primer or STP Ltd (and allow to dry for 8 hours) under touch dry condition. Stage 4: Applying two coats of water proofing of Dr Fixit Pidifin 2K for the sunken portions of toilets/bathrooms (The surface after painting one coat shall be allowed to dry for 6 hours before next coat) all as per manufactureres instructions. Stage 5 : Again rendering 10 mm thick in CM 1:4 mixed with Dr Fixit Pidicrete URP or plaster seal of STP Ltd. Stage 6 : All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP. Stage 7 : Making holes in wall and fixing 600mm long 25 mm dia GI spout for draining the surplus water if any.

S&F 110mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal including jointing, complete all as specified.

S&F in repairs, 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including distance pieces and incld stack clamps with nuts & bolts, complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) bends/shoe and provided with access door any radius fixed to walls including distance pieces and stack clamps ,including making good around complete all as specified.

S&F in repairs 75 mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to walls with and including suitable clamps, complete all as specified.

All as per item 129, but expect pipes, complete all as specified.

S&F in repair, 75 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with oval access cement joints, complete all as specified.

S&F in repairs 100 mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to walls with and including suitable clamps, complete all as specified.

All as per item 132, but expect pipes, complete all as specified.

S&F in repair 100 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with cement joints complete all as specified.

Taking down carefully existing copper/alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/fan point/bell controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

All as per item 136, above but one switch socket outlet multi purpose, 3pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable,insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified

S&F Switch, piano, flush type, single pole one way, 5 Amps, ISI marked, complete all as specified.

S&F Switch piano flush button type 15 Amps, single pole, one way,ISI marked, complete all as specified.

S&F Socket outlet,2 in 1, 5 pin ,5 Amp, piano flush type, ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin,5 Amp and 15 Amp, piano flush type, ISI marked, complete all as specified.

S&F Bell push, flush type, 5 amp complete all as specified.

S&F Ceiling rose, surface type, backelite 65mmx50mm, 3 terminals, complete all as specified.

S&F Lamp holder, insulated body, threaded dome pattern, suitable for bracket/batten fittings, complete all as specified.

S&F LED bulb 10 watts suitable for fixing in lamp holder, complete all as specified.

S&F bell Ding Dong AC 230 volts, single pole, complete all as specified.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified.

S&F in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, concealed in wall, TPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof,suitable for incorporation of MCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, FP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F of MCCB Thermal based release adjustable type 4 pole 63 Amps 50 Hz 415 Volts with rupturing capacity 16 KA including testing, complete all as specified and as directed.

S&F in repairs MCB, single pole, 240 Volt, 32 Amps,10 KA 'B' series, complete all as specified.

S&F in repairs MCB, SPN, 40 Amps, 240 volts 6 to 32 Amps10 KA 'B' series, complete all as specified.

S&F in repair of regular batten for LED tube 20W, 4 feet long indoor decorative batten with extruded aluminium housing & Opal diffuser energy efficient 230 Volts IP-20 fixed to walls/ceiling etc, complete all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified..

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V , drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

M& L Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, as in repairs and as specified including the following :-(i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

Supply & Fixing LED Bldg security light 40 watts lens type, pressure die cast aluminium housing, heat resistane toughened glass with frame, IP 66 protection with bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.0 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts, nuts, and washers, complete all as specified and directed.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan,for laying of cable and getting out, compete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

S&F in repair cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/laid under floor/road crossing/walls complete with and including clamps socket & elbow etc complete all as specified.

M/s Vishant Construction Co

Guru Kirpa Trading Company

M/s Bansi Lal

M/S M H Builders

RAKESH KUMAR SATISH KUMAR

ABHISHEK AND COMPANY