Replacement of wooden batten tile roofing with RCC slab roofing and renovation of quarters in FF block and G- block in remaining Quarters in Nangal Township.

Amount

Civil Items

Dismantling roofing Second class mud roofing (CSR item No. - 8.8(b))

Dismantling brick work tile masonry or tile lining. (In cement) (CSR item No. - 8.5 b)

Removing R S beams from structures or trusses (CSR item No. - 8.25)

Dismantling wood work from roof. (CSR item No. - 8.9)

Dismantling concrete (e) Reinforced cement concrete (CSR item No. - 8.6 e)

Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base (CSR item No. - 8.17)

(i) Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. (CSR item No. - 8.26a)

(ii) b)Windows of area 3 sqm and below (CSR item No. - 8.26b)

(iii)Clerestory windows of area 3 sqm and below (CSR item No. - 8.26c)

Scraping c) Cement Plaster (CSR item No. - 8.31 ( C ))

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (CSR item No. - 10.20)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (CSR item No. - 9.8)

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete (CSR item No. - 18.18)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body). a) Size 600x600 mm (CSR item No. - 14.113 (a))

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR item No. - 14.126)

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. (CSR item No. - 14.72)

Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (v) Pink plain marble Marble Tiles of various sizes 12mm to 15 mm thick (b) Slabs sizes above 0.50 sqm.. (CSR item No. - 14.74 (v) (b))

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (CSR item No. - 11.4(i))

12.5 mm thick cement plaster 1:5 (CSR item No. - 15.1)

20mm thick cement plaster 1:5 in two coat work (CSR item No. - 15.21)

Plastering on underside of ceiling 6 mm thick cement plaster 1:3 (CSR item No. - 15.41)

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 (CSR item No. - 13.45)

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (CSR item No. - 13.55)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4.00kgf / cm²) conforming to IS : 4985, including jointing with seal ring (i) Single socketed pipes. (i) U-PVC pipes (working pressure 4.00 kgf. / sqcm) Single socketed pipe 110 mm dia. (CSR item No. - 13.74 a (i))

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. a) UPVC 110 mm bend (CSR item No. - 13.75 a)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish (CSR item No. - 16.65)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade (CSR item No. - 16.10)

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm (CSR item No. - 16.59)

(i) Carriage of material by manual means, Stone(building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Including loading and unloading (metaled roads)With lead 0-1.0 km. (CSR item No. - 5.2(i) & 4.2 (A))

(ii) Carriage of Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone Boulders, Kankar and Building Rubbish, Earth.0.5 to 1.0 km including Stacking within 15 metres of the unloading points into stacks of specified sizes.(V) Timber (CSR item No. - 5.2 (i) & 4.2 A)

(iii) Carriage of MS Bars, Steel, Coal, Lime, GI pipes and specials, CI manhole covers, steps and other castings and ancillary miscellaneous items like lead, hemp yarn etc. 0.5 to 1.0 km including Stacking within 15 metres of the unloading points into stacks of specified sizes (CSR item No. - 5.2(IV) 4.9 )

(iv)Carriage Tiles (30.48 cm x 15.24cm x 5.08cm) including loading, unloading including Stacking within 15 metres of the unloading points into stacks of specified sizes With 1 km. lead (CSR item No. - 5.2(vii) 4.4(i) )

Scraping e) Bricks dismantled from brick work in lime or cement. (CSR item No. - 8.31e)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR item No. - 6.6)

Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type (CSR item No. - 10.6 b (ii))

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material (CSR item No. - 14.7)

Floating coat of 1.5mm thick neat cement laid in one operation to the topping (CSR item No. - 14.4)

Providing & fixing glass strips 4mm thick in floors. a) 50 mm wide (CSR item No. - 14.105 a)

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973c (Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick (CSR item No. - 17.27 b (iv))

Deodar wood doors shutter with 12mm thick phenol Bonded BWP ply (Anchor Kit ply, Nova teak , or National or any other ISI approved quality) I/C hinges, screws, chocks & cords etc. Complete fixed in position (Single leaf) a) Phenol Bonded Ply Panel (II)35mm thick (CSR item No. - 17.10 (ix) a (ii))

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position (a) Panelled, glazed or glazed and panelled. (ii) 35mm thick (CSR item No. - 17.10 (I) a (ii))

Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf)a) 35 mm thick (CSR item No. - 17.11 (i) i)

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc. (CSR item No. - 16.16)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR item No. - 16.17)

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing (CSR item No. - 13.13 (i))

Scraping (g)Tiles dismantled from the work in lime or cement(CSR item 8.31(g)) (CSR item No. - 8.31 g)

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete. (b) Iron Helical spring (CSR item No. - 17.41 (b))

Providing and fixing 0.50mm thick aluminium sheet including cost of necessary fittings i.e. screws, etc. complete. (CSR item No. - 17.44)

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (B) 300mmX16mm (CSR item No. - 17.49 (A))

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm. (CSR item No. - 17.23 (ii))

Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect a) for Single rebate (CSR item No. - 18.29 a)

Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect b) for double rebate (CSR item No. - 18.29 b)

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. (CSR item No. - 18.27)

WATER SUPPLY ITEM

Dismantling Sanitary fixtures such as Eurpoean /Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. a) Eurpoean/Indian/Orissa W.C., (CSR item No. - 30.88 a)

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (a) 15mm internal diametre pipe line. (CSR item No. - 28.63.a)

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. a)15mm dia i/d (CSR item No. - 28.35 a)

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. a) 15mm i/d GI Union (CSR item No. - 28.40 a)

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75mm x 75mm (CSR item No. - 30.85 a)

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75mm x 50mm (CSR item No. - 30.85 c)

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. (CSR item No. - 30.2)

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. (iv)Brass Bib cock/Stop cock 15mm x 400gm (CSR item No. - 30.65A (iv))

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. (CSR item No. - 30.80)

Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. (CSR item No. - 30.56-A)

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugsembedded in walls with brass screws complete in all respect. (c) Acrylic towel Rails size 20mm dia 600mm long (CSR item No. - 30.58 (c))

Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. (b) Through wall 22.86 cm thick (CSR item No. - 28.56 (b))

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. (b) C.P.brass 15mm Concealed stop cock with flange. (CSR item No. - 30.66 (b) )

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. c) C.P.brass 15mm Angle valve without flange (CSR item No. - 30.66 (c) )

Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. e) Aluminium khunti with 4 pegs (CSR item No. - 30.63 e)

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. (CSR item No. - 30.64 A)

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect. b) Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm (CSR item No. - 30.47 b)

ELECTRICAL ITEM

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface) Wiring fan point (Without fan box) (CSR item No. - 34.05(i)(a))

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface) Wiring light point (CSR item No. - 34.05(ii) )

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface) Wiring call-bell point (CSR item No. - 34.05(iii) )

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface) Wiring 6 Amp. Plug control comprising wall socket point (CSR item No. - 34.05(v) )

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface) Wiring 16/20Amp. power plug control point (CSR item No. - 34.05(vi) )

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C) (CSR item No. - 34.16 A (ii) )

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (iii) MCB Single Pole 40amp. (10kA, Curve-C) (CSR item No. - 34.16 A (iii))

SHEET METAL IRON CLAD CHANGEOVER SWITCHES: supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:-(i) ICDP Changeover Switch 32amp., 415volts (CSR item No. - 34.19(i))

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (ii) SP&N Double Door Distribution Board 8 way each (CSR item No. - 34.17 (ii))

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4sq.mm (Un-sheathed) (CSR item No. - 34.09(iv))

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) (CSR item No. - 34.09(iii))

NON-SCHEDULE ITEM

Racking of joints in lime or cement, mortar and preparing the surface for re-pointing or re-plastering including disposal of rubbish to the dumping ground within 50m lead (excluding the cost of scraping of plaster and re-plastering). (AOR)

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (without cost of bricks) (AOR)

Providing & fixing of J-hooks (MR)

Bidder Name

Amount in Words

ANMOL KATYAL CONTRACTOR

VINOD KUMAR SHARMA

SUBASH CHAND

SUDHIR ANAND

SUBASH CHAND

SUDHIR ANAND

ANMOL KATYAL CONTRACTOR