REPAIR/MAINT BUILDINGS AND SUB STATION BUILDINGS OF 33/11 KV INSTALLATIONS AT BB CANTT SRINAGAR

Amount

Taking down shutters exc 1 sqm and n.exc 2 sqm each all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each all as specified and directed.

S&F for 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated all as specified and as directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with or without glazing bars, dovetailed or weldedall as directed.

S&F mild steel butt hinges medium weight 100 mm size etc complete all as specified and directed.

S&F stainless steel butt hinges medium weight 75mm size etc complete all as specified and directed.

S&F 150 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 100 mm size Aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 including dismantling of plain or corrugated steel sheeting, any gauge thickness complete all as specified.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , fixed with coach screws and washers, in roof, wall etc including dismantling of plain or corrugated steel sheeting complete all as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet (any pattern) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges, grill gates, guard bars etc cut to shape, drilled and ountersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Steel work in tubular trusses/stanchoins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F mild steel Steel rolling shutters, thickness of laths 1.25mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type, including running channel, sefety lever locks complete all as specified & directed.

All as per item No 23 above but with gear operated type with bevel gear box, chain and crank handle.

Dismantling of timber scantlings 40 sqcm and over in section, in any position unframed work complete all as specified.

M&L for wrought second class hard-wood in scantlings frame work complete all as specified.

M&L for 4mm thick plywood grade BWR type BB fixed with screws/ nails to timber frame work for wall panelling /flooring/ ceiling including dismantling old wall & ceiling boards all as specified and as directed.

M&L for 12mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including required teak wood lipping, including 1.5mm thick decorative laminate in one face complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners, joining cleat of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM etc complete all as directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium door, window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on brick work or concrete surfaces finished even and fair all as specified and directed.

M&L for rendering 10mm thick in CM (1:4) on brick work or concrete surfaces finished even and fair wall as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm /300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections all as specified.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore including taking up or down steel tubing and connections all as specified.

S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes & all fittings complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes & all fittings complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks, three layer (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I complete including dismantling of old unserviceable PVC water tanks all as specified and directed.

S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks, three layer (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I complete including dismantling of old unserviceable PVC water tanks all as specified and directed.

S&F in repairs PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement of 75 mm dia etc complete all as specified and directed.

S&F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 40mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water (for WHB/sink/wall) screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor & pavings n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over and including sand layer as per site requirement complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in copings in roof kerbs or mud stops, rounded or chamfered on edges including use and waste form work complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished top surface even & smooth without using extra cement complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M&L for RCC (nominal mix), 1:2:4, Type B-1 (using 20mm graded crushed stone aggregate) asin slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply only MS Galvanised chain link fencing (not less than 1.75 Kg/Sqm) any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

S&F Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples or welded to steel frame, size of mesh 25mm complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls, apply two coats of oil bound distemper over a coat of suitable primer complete all specified and directed.

M&L for preparation of old treated plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F for 2mm thick acrylic sheet any colour cut to required size and fixed with coach screws complete all as specified and directed.

S&F stainless steel block capital letters 200-250mm height, 20-25mm thickness fixed to iron frame/acrylic board with adhesive/welding as required for display sign board complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces complete all as specified and as directed.

M/S Tajamul Ah Buchh