Paver blocks work and construction of store room at Kanipura OHT Premises.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 meter including removal and disposal of top organic soil not exceeding 150 mm in thickness if required and as per relevant clauses of section-200. In area of light jungle 2.2/14Vol- 3

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Moorum/Hard copra 150*1*0.5 2.18.1/19Vol-2

Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of Stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge. 11.43.2/136

Providing and laying in position Plain cement concrete (PCC) of specified grade excluding the cost of centering and shuttering Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate 18.14/229 V-I

Providing & fixing corrugated Galvanised steel (CGS) sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 4Nos*10*3.7+10*10 = 248 m2 12.1/143

Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length in M 20 cement concrete, excluding the cost of steel reinforcement but including the cost of boring, cement concrete, all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles 16.1/183

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. Thermo-Mechanically Treated bars. (Fe 500 D or more) 5.11.4/47

Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes 10.15/118