Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹1.1 Cr+₹78,146.92 (0.74%)Rejected-Finance | L2 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 3 | L3₹1.1 Cr+₹3.4 L (3.24%)Rejected-Finance | L3 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 4 | L4₹1.2 Cr+₹13.3 L (12.5%)Rejected-Finance OPPOSITE GHOOM DRC PO GHOOM DISTT DARJEELING WB PIN 734 102 | DARJEELING | WEST BENGAL | 734102 | L4 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 5 | L5₹1.2 Cr+₹16.0 L (15.1%)Rejected-Finance | L5 | Rejected-Finance HIGHER THEN L1 BIDDER |
Tender Value
₹98.4 L
EMD Value
₹1.8 L
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ 136 Works Engineers Pin -914136 C/o 99 APO
AUGMENTATION OF EXTERNAL WATER SUPPLY DISTRIBUTION SYSTEM AT LEBONG UNDER AGE(I) DARJEELING
2023_MES_574406_2
CWE/136-WE/55 OF 2022-23
Open Tender
Civil Works - Water Works
Item Rate
280 days
Darjeeling
Class C, Category a(ii)
8 documents required · 8 mandatory
₹1,000
Yes
AGE (I) DARJEELING
₹1.8 L
Yes
13 Apr 2023
24 Feb 2023
14 Mar 2023
24 Feb 2023
13 Mar 2023
3 Mar 2023
24 Feb 2023 - 27 Feb 2023
Amount
Excavation in trenches in hard/dense soil not exceeding 1.5 mtr width and not exc 1.5 mtr deep incl removing vegitation, shrubs, roots etc in plane/terrain surface as per site for laying of pipeline etc and getting out all as specified and as directed.
Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick soft/hard soil all as specified and directed.
Removing surplus soil to a distance 150mtr and deposit where directed at alevel not exceeding 1.5 mtr above the starting point.
Removing surplus rocks to a distance 150mtr and deposit where directed at alevel not exceeding 1.5 mtr above the starting point.
Supply and laying pipe galvanised iron medium grade ISI marked in plane/terrain trenches or fixed to wall/ceiling/rockey surface etc as per site incl all types of fittings fixtures complete all as specified and as directed of following sizes.
(a) 80mm dia pipe
(b) 50mm dia pipe
(c) 40mm dia pipe
(d) 150mm dia pipe incl bends (for wash out of sedimentatation tank and suitable wash out lines shall be kept in each chamber during casting of sedimentation tank as and where directed)
Supply and fixing Gun metal gate valve/glove valve ISI marked with Iron wheel head screwed both end for GI tubing of following sizes :-
(a) 40mm dia
(b) 50mm dia
(c) 80mm dia
Taking down Old unserviceable GI flanges from the existing GI Pipe of size 80 mm dia
S&F Flange GI of size 80mmm bore, threaded type, ISI marked complete all as specified and as directed.
Taking out old unserviceable Sluice Valve /Non return valve/Air release valve/foot valve of size 40/50/80 mm bore, and removal from site all as specified.
S&F Cast iron Sluice Valve ISI mark (PN-1.6) of size 80 mm bore confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and as directed.
All as per Sl item No. 17.00 above but of size150mm bore complete all as specified and as directed. (for wash out line of sedimentatation tank)
S&F Cast iron Non Return valve w/o bypass arangement, Swing type, of Size 80 mm bore, confirming to IS 5312, PN 1.6 flanged ends with nuts bolts, washers complete all as specified and as directed.
S&F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 40 mm dia bore and fixing up in water supply mains any type incl fittings complete all as specified and as directed.
S&F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in water supply mains any type incl fittings complete all as specified and as directed.
S&F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 80 mm dia bore and fixing up in water supply mains any type incl fittings complete all as specified and as directed.
Supply, install, testing and commissioning monoblock pump set incl base frame foundation suitable for 415V, 3 Phase, 50Hz system, head range 18 to max 30 mtr (rated head as per site, discharge range 250 to 800 LPM (rated discharge as per site) incl inlet/oulet as per site requirement of capacity 5HP, IP-55 including starter with enclosure fixed to wall duly connected with rated copper connection cable etc complete all as directed.
Supply, install, testing and commissioning monoblock pump set incl base frame foundation suitable for 415V, 3 Phase, 50Hz system, head range 25 to max 45 mtr (rated head as per site, discharge range 200 to 1200 LPM (rated discharge as per site) incl inlet/oulet as per site requirement of capacity 10HP, IP-55 including starter with enclosure fixed to wall duly connected with rated copper connection cable etc complete all as directed.
Taking out unserviceable MS sheet tanks from existing position after dismantling and diconnecting all inlet and outlet connections and deposited to MES stores complete all as specified and directed.
Supply, installation, testing and commissioning of SMC Panel Tank of capacity 28KL confirming to IS: 14399 Part (1&2): 1996 & IS 4249:1967 of Size 4Lx2Bx3.5H complete all as specified and as directed.
The sizes of panel should be : Roof Panels : 1000 x 1000 mm Side Panels : 500 x 1000 mm, 1000 x 1000 mm, 1000 x 1500 mm, & 1000 x 2000 mm Bottom Panels : Convex shape 1000 x 1000 mm Drain Panel : 1000 x 1000 mm at bottom for complete drain of water Manhole Panel dia. 600mm lockable lid of hot pressed moulded made out of SMC. Non-Toxic PVC foam sealant gasket sealant tape : 3 mm thick with high level of resistance to ageing and superior recovery from compression
Fasteners utilized for the panel joints of 8.8 grade Steel HDG Bolts nuts M12 x 40mm External reinforcement ‘C’ channel at every 1-meter except in the corner of steel with anti-corrosive paint and it is tie with top external tie rods. (If tank height is more than 1 meter) Internal roof supports should be of FRP/GRP 5 mm thick hollow square section. Air-vent dia 100mm with mosquito proof mesh insect proof. Aluminium body water level indicator with clear tube type and brass nozzle (For Tank height more than 1 Meter) Internal FRP ladder with wall mounting arrangement inside (For Tank height more than 1 Meter). External G.I. ladder with complete fixing arrangement outside. Complete fixing of Inlet/Outlet/overflow/drain should be G.I. Flange type with 9” long Nipple.
Incl all civil foundation related work or dwarf wall/raft, Guide line drawing will be provided after receipt of advance. Base Frame / Grillage, Plumbing and piping, Nozzles/ flanges, welding machine, Scaffolding on buyers scope, Warehouse etc as required at site as per manufacturer,s design.
M&L for stagging/ pedestral grillage (HDG grill) of size 4X2 or heigher capacity for SMC Panel Tank of capacity 28 KL confirming to IS: 14399 Part (1&2): 1996 & IS 4249:1967 including all accessories and allied works and preparationof base/foundation etc complete as per manufacturer's design/ specification and gurantee of height 0.6 to 1.0mtr max to match outlet of sedimentation tank and inlet of storage tank complete.
M&L Cutting existing GI water turbing 40/50/80mmbore for alternations or addition including screwing/threading and jointing with suitable size GI socket/DI specials complete all as specified and as directed .
M & L for construction of brick masonry valve pit of size 900 X 900 X 900mm (internal dimension) one brick thick wall built in CM (1:4) on 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4) both externally and internally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including 40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x5mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil including demolition of old unserviceable existing valve pit & pit cover complete all as specified & directed.
M & L for cutting existing road /hard standing not exc 45x45 cm in wide and depth getting out excavated material for laying tubes, returning refilling and well ramming watering finish surface 10 cm from top using PCC 1:3:6 including removal of surpluse soil
M&L for PCC 1:4:8 type-D-2 using 40mm graded stone agragate as in foundation, mass filling repair to floor, path, as and where required incl necessary form work and fair finishing without using extra cement complete all as specified.
Dismantling Concrete on ground floors and pavings n exc 15 cm thickness
Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth including removing vegitation, shrubs, roots etc in plane/terrain surface as per site for laying of pipeline etc and getting out in soft/loose soil complete all as specified and as directed .
Excavating over areas, exc1.5 m & n.exc 3 m deep and getting out in soft/ loose soil complete all as specified and as directed.
M&L for RCC M 30 Design Mix using (20 mm graded aggregate) for Foundations, including rafts,footings, foundation beams;plinth beams; bases forcolumns, complete all as specified and directed.
M&L for RCC M 30 Design Mix using (20 mm graded aggregate) forColumns, pillars, piers, posts and struts complete all as specified and directed
M&L for RCC M 30 Design Mix using (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for RCC M 30 Design Mix using (20 mm graded aggregate) forSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeas specified and directed
M&L for RCC M 30 Design Mix using (20 mm graded aggregate) forWalls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressesas specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface complete all as specified and directed.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) specified and directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as specified and as directed.
M&L for Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders Complete all as specified and as directed.
Material and labour for fly ash brick work with sub-class ‘B’ bricks, set in cement morter (1:6) straght or curved on plan, exceeding 6m mean radious as in drain complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:4 with water profing compound finished even without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:3 with water profing compound finished even without using extra cement complete all as specified and as directed.
M&L for rendering 5 mm thick on fair faces of concrete surfaces of celling in cement morter 1:3 with water profing compound finished even without using extra cement complete all as specified and as directed.
M&L for water proffing compound as directed and specified
M&L Providing 20mm Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner) as completed specified and directed
M&L for Stairs (framed) (Fe 410W Gde E-250 ) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. completeas specified and directed.
M&L for two coats of Synthetic enamel paint over newwly prepared Steel Surfaces of any description, over 10cm in width or girth, not otherwise over red oxide described as specified and directed.
Mild steel plates, plain or chequered, 5mm thick or over in thickness (Fe 410W Gde E-250 ) in available sizes
S& F rubber gasket 150mm wide laid in each lift of retaning wall complete all as specfied as directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface specified and as directed
Material and labour for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded areate) as in floor and plinth protection complete and as directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil completed all as per specified
Excavating over areas (exceeding 1.5m width), n exc 1.5 m deep and getting out in soft/loose soil completed all as per specified
M&L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted, built in cement mortar (1:6)
Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm(Granite or Trap stone) to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in bond stone and coping completed all as per specified
Supplied only PVC pipe of 100mm dia as in weep hole all as specified and as directed
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upti courses in cement mortar 1:4 all as per specified
M& L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the alignment and gradient by hydraulic pipe jacking technique for trenchless eraction of pipe complete including tunneling, excavation in any type of soils including hard soil/rock etc, isertion of GI pipe medium grade of size 40/50/80mm dia in any length including jointing materials and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned state/central authorities/taking permission etc complete all as specified and as directed/ (NOTE :- PIPE WILL BE MEASURED AND PAID SEPARATELY UNDER RELIVENT ITEMS)
M&L preparation of new surface of wall and applying two coat of white wash complete all as specified and directed
Material & Labour for 2 coat colour wash onnewly prepared concrete surface specified and as directed.
Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Note 3:-Products "Make" of BOQ itemsare given in Particular Specification of Tender Documents.Bidders are advised to keep in mind of all products make as per Particular Specification of Tender Documents before quoting the rates.Note4:- RCC work to be executed for construction of RCC sedimentation tank (Water Retaining Structure) as per drawings which is kept in Office of The AGE(I) Darjeeling.Bidders are requested to study all relevant drawings taking prior appointment of AGE(I) Darjeeling during working hours which are kept in Office of The AGE(I) Darjeeling before quoting of unit rates .
SMB ENTERPRISE
AASHIRWAD ENTERPRISES
Damdoo Bhutia
KWOK YING CHIU
RAI CONSTRUCTION
BIMAL BHATTRAI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .