Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.7 LAccepted-AOC | 1 | Accepted-AOC ACCEPTED | |
| 2 | 2₹16.0 L+₹31,964 (2.04%)Rejected-AOC | 2 | Rejected-AOC REJECTED |
| Sl No | Description | Qty | Unit | RAJ ENTERPRISES L2 | RAJ ENGINEERING L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling of existing turbine pumpset form the pump house | 1 | 1Nos(One Number) | 11,088 ₹11,088 | 10,866 ₹10,866 Lowest |
| 2.00 | Supply and delivery of Vertical type water/Oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete | 1 | 1Nos(One Number) | 14,48,370 ₹14,48,370 | 14,19,402 ₹14,19,402 Lowest |
| 3.00 | Replacement at suction well -1 (3.50m dia) damaged operating platform by 6mm M.S checker plate arrangements.( | 1 | 1Nos(One Number) | 62,568 ₹62,568 | 61,317 ₹61,317 Lowest |
| 4.00 | Supply at heavy metal fabricated 210mm dia supporting clamp with required bolts and nuts for supporting to hang and hold vertical turbine pump with 35HP motor in the suction well-1 ( | 2 | 1Nos(One Number) | 27,720 ₹55,440 | 27,166 ₹54,332 Lowest |
| 5.00 | Errection changes for the above pumpset including fabrication of pipes laths works etc, | 1 | 1Nos(One Number) | 20,790 ₹20,790 | 20,375 ₹20,375 Lowest |
Tender Value
₹18.8 L
EMD Value
₹18,750
Closing Date
6 Oct 2025, 3:00 pmClosed
COMMISSIONER
113 Thamilzh Salai(Palai Road) Thoothukudi Corporation
supply and delivery and replcement of 35HP VHT motor and pump at vallanadu head work
2025_MAWS_608146_1
119/2025-26/AEE(HW)
Open Tender
Civil Works
Works
30 days
THOOTHUKUDI CORPORATION
Refer tender Notice
2 documents required · 2 mandatory
₹0
₹18,750
16 Oct 2025
24 Sept 2025
6 Oct 2025
24 Sept 2025
6 Oct 2025
1 Oct 2025
Amount
Dismantling of existing turbine pumpset form the pump house
Supply and delivery of Vertical type water/Oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete
Replacement at suction well -1 (3.50m dia) damaged operating platform by 6mm M.S checker plate arrangements.(
Supply at heavy metal fabricated 210mm dia supporting clamp with required bolts and nuts for supporting to hang and hold vertical turbine pump with 35HP motor in the suction well-1 (
Errection changes for the above pumpset including fabrication of pipes laths works etc,
RAJ ENTERPRISES (BID ID -1478873)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .