SPECIAL REPAIRS TO NC(E)s Md ACCN AT AFS THANJAVUR PH-I

Amount

Demolition of cement concrete of any description and any position not otherwise specifically provided for complete all as specified

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in filling in sunken floors complete all as specified and directed.

M&L for PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.

M&L 12 mm thick Plaster on RCC roof slab with CM 1:4 including water proofing compound @ 3% by weight of cement shall be carried out complete all as specified and directed. Note :- WPC shall be measured and paid separately.

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying snadwich tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3kg/sqm including removal of existing water proofing treamant on sunken slabs, edges and vertical surfaces complete all as specified and directed.

M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over APP membrane surface complete all as specified and as directed.

Supply only water proofing compound complete all as specified and directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and directed.

M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM 1:6 on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified. Note:- WPC shall be measured and paid separately.

M&L for 10mm thick plaster in CM 1:6 on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 5mm thick plaster in CM 1:3 on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of chalk white primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat cement base paint over a coat of chalk white primer complete all as specified and as directed.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat chalk white primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying one white wash including filling of cracks, holes etc. with cement putty complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M&L for ATT post construction bldg along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for ATT providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

M & L chequered cement concrete coloured tiles heavy duty glassy finish 300X300X20 to 25mm thick, set jointed and pointed with grey cement and pigment fixed usign spacer 3mm thick over 20mm thick screed bedin CM 1;4 complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exe 1.0 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exe 1.0 Sqm and n.exc 2 Sqm each & refixing in same/other opening complete all as specified and as directed.

S&F flush shutter 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed.

S&F 30mm thick, 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc.(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a) complete all as specified and directed.

S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and directed.

S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick (style)with 2,4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and directed.

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.

All as per Srl item No 30 here-in-before but 75mm long complete all as specified and directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing old wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Hacking out old broken glass (any thickness size, quality description) form wooden frame or stone concreteor brickssorrounding glazed with putty or fixed in beads n.exc. 1.5 Sqm in each pane complete all as specified and directed.

S&F in repairs 4mm thick sheet glass ordinary quality and glazing with oil putty in square/ rectangular n.exc 0.5sqm each pane complate all as specified and as directed.

S&F in repairs 4mm thick Figured glass ordinary quality and glazing with oil putty in square/ rectangular n.exc 0.5 Sqm each pane complate all as specified and as directed.

S&F floor door stopper of aluminium alloy body and double tongue, anodised with hard drawnspring of 140mm size fixed in floor complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S & F in repairs stain less steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed of CM (1:4) with 20 mm thickness laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spcified and as directed.

All as per srl item No 41 here-in-before but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed.

All as per srl item No 45 here-in-before but as in skirting / dados etc but excluding 15mm thick screed bed in cement mortra 1:4 including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed.

All as per srl item No 50 here-in-before but 25mm dia steel tubing connection, including cleaning for refixing or removal to store

S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F Rotational moulded Polyethylene (HDPE) Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 500ltr capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed.

Dismantling of 110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd complete all as specified and directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified and directed.

S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

Dismantling of 90 mm dia cast iron / PVC pipes incl bends / branch pieces jointed in cement mortar and taking out if reqd complete all as specified and directed.

S&F for 110 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc complete all as specified.

S&F for 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

Dismantling of 75mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd complete all as specified and directed.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed.

S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and directed.

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius complete all as specified and directed.

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia complete all as specified and directed.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.

S&F in repairs vitreous china counter wash hand basin ovel shape of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repairs for bib taps 15 mm dia long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type complete all as specified and directed

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cart Part No PIS-12 H)

S&F in repairs stop cock (15 mm bore dia) cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union with long shank and cup Complete all as specified and as directed.

S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed.

S & F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm incl waist fittings 32mm dia complete all as specified and as directed.

S& F in repairs 20mm dia, Harrison rails, powder coated anodized aluminium alloy with fixing curtain brackets, stops, rollers etc complete all as specified and directed.

S&F in repairs wardrobe aluminium hooks set of six, 50mm to 60mm width complete all as specified and as directed.

S&F in repairs for plate rack of stainless steel of size 750X900X250 mm with steel slalbs & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag or equivalent)

S&F in repairs chromium plated overhead shower rose for 15 mm bore dia & shower arm with or without swivel joints fixed to 15mm bore of pipe complete all as specified and as directed.

M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including necessary form work all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and directed.

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified.

M&L for preparing old plastered surfaces of walls and applying one white wash including filling of cracks, holes etc. with cement putty all as specified complete all as specified and directed.

Taking down chowkats/frames without removing shutters area exc 1.5 but n.exc 4sqm complete all as specified.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC, extruded glazing beads, uPVC extruded interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass/board or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete. The rate includes necessary cutting of existing shelf / addl brick work up to the thickness of the frame to accomdate frame in position.

Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed/board & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete. The rate includes necessary cutting of existing shelf / addl brick work up to the thickness of the frame to accomdate frame in position.

S & F veneered decorative plywood termite proof 19/20 mm thick, grade 1 (with BWR resin) with decorative face lamination on one face fixed as in cupboard partion complete all as specified.

S & F UPVC insulated board profile to fill opening for item no 96 and 97 above 6 mm/ suitablle thickness, fixed as in cupboard partion/shutter complete all as specified.

S & F Modular kitchen cabinet uint with 18mm thick PVC/WPC board water proof and termite proof in any colour glossy/matte finish at one side and other side white complete all as specified.

S&F SS 304 Auto hinges for cup board shutters all as specified anf ditected make Hettich or equivalent.

S&F SS 304 Handles 250 mm long as specified anf directed.

S&F Magnetic catch for cupboard shutter as specified anf directed.

S & F SS 304 cutlery Basket tray of size 17"x20"x4" of make Hettich or equivalent.

S & F SS 304 cup and saucer of size 17"x20"x6" of make Hettich or equivalent.

S & F SS 304 plain basket of size 17"x20"x8" of make Hettich or equivalent.

S & F SS 304 Oil Basket 3 Tier with minimum width of 150 mm make Hettich or equivalent.

S&F 500 mm long SS 304 slider for Basket fixing above make hettich or equivalent.

NITHYASRI AND CO

S.T.S.CONSTRUCTIONS AGENCIES

M/S. SRI RAMANUJA CONSTRUCTIONS

SUPER COOL