Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹54.8 LAccepted-AOC H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹64.0 L+₹7.8 L (13.9%)Rejected-AOC | L-2 | Rejected-AOC Other than L-1 | |
| 3 | L-3₹65.9 L+₹9.7 L (17.3%)Rejected-AOC 112 SHIV NAGAR II MURALIPURA SIKAR ROAD JAIPUR RJ | JAIPUR | RAJASTHAN | 302001 | L-3 | Rejected-AOC Other than L-1 | |
| 4 | L-4₹68.4 L+₹12.2 L (21.8%)Rejected-AOC | L-4 | Rejected-AOC Other than L-1 | |
| 5 | L-5₹69.8 L+₹13.7 L (24.3%)Rejected-AOC | L-5 | Rejected-AOC Other than L-1 |
Tender Value
₹94 L
EMD Value
₹1.7 L
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Chandimandir
HQ CWE Chandimandir PIN-134107
CWE/KAS-28/2024-25 COMPREHENSIVE B/R AND E/M MAINT OF MD ACCN AND OTM ACCN AT MIL STN DAGSHAI UNDER GE KASAULI
2024_MES_660031_1
CWE/KAS-28/2024-25
Open Tender
Miscellaneous Works
Item Rate
270 days
GE Kasauli
Class C cate a(i)
9 documents required · 9 mandatory
₹1,000
GE Kasauli
₹1.7 L
18 Oct 2024
15 Jun 2024
22 Jul 2024
15 Jun 2024
20 Jul 2024
6 Jul 2024
15 Jun 2024 - 22 Jun 2024
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each including iron mongries complete all as specified and as directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each including iron mongries complete all as specified and as directed by Engineer-in-charge.
Taking down shutter of any description exe 1.00 Sqm but n.exe 2.00 Sqm each complete all as specified and as directed by Engineer-in-charge.
Dismantling timber scantlings 40 sqcm and under in section, in any position framed / Unframed work complete all as specified and as directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified and as directed by Engineer-in-charge.
Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed including demolition of brick masonry built in cement mortar including all quoins arches pillars complete all as specified and as directed by Engineer-in-charge.
M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No. 8.00 here-in-beore but in CM 1:6.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper of any approved tint over a coat of primer complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and as directed by Engineer-in-charge.
M&L for Non-skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc 0.11sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed with cement mortar 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.
M&L for Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in cement mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No 14.00 her-in-before but as in skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
Material and labour for Glazed ceramic coloured tiles in vertical surfaces exc 0.08 sqm and n exc 0.16 sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.
M&L for 16 to 18 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps, jambs, pillars, windows cills, cooking platform and similar work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 20 mm thick in cement mortar 1:6, including dismantling of old unsv granite stone complete all as specified and as directed by Engineer-in-charge.
M&L for Rounding to edges of stone slabs to one edge, such as in steps and other similar situations complete all as specified and as directed by Engineer-in-charge.
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm with plugs, washers and wastes; including waste coupling and waste pipe bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe etc complete all as specified and as directed by Engineer-in-charge.
S&F in repair stop valve 15 mm dia, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified and as directed by Engineer-in-charge.
All as per Serial item no 20.00 here-in-before but 20 mm dia.
S&F in repair 15 mm bore Bib taps, fancy type, chromium plated, screwed down for iron pipe or for brass ferrule etc complete all as specified and as directed by Engineer-in-charge.
All as per Serial item no 22.00 here-in-before but long body.
S&F in repair 15mm bore angle cock, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union etc complete all as specified and as directed by Engineer-in-charge.
S&F in repair 15mm bore Pillar tap fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butter fly handle etc complete all as specified and as directed by Engineer-in-charge.
S&F in repair 15 mm bore wall/ basin/ sink mixer, brass Chromium plated for mixing hot & cold water screwed down for iron pipe etc complete all as specified and as directed by Engineer-in-charge.
S&F in repair Vitreous China wash hand basin, white, with pedastal, flat back, of size 550 x 400mm including brackets and waste coupling, complete all as specified and as directed by Engineer-in-charge.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts) complete incl PVC P or S trap 110 mm dia and making good to floor to match with adjoining surfaces including plastic water closet seat cover, white, closed pattern with flat bottom mild steel chromium plated of aluminium hinging device etc complete all as specified and as directed by Engineer-in-charge.
Supply and fixing vitreous china squatting pan, “Orissa” pattern of size 580 mm x 440 mm, white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including waste pipe, waste coupling and PTMT urinal spreader fixing with 15 mm dia pipe complete all as specified and as directed by Engineer-in-charge.
S&F in repair 10 ltr capacity PVC valveless, syphonic action type, low level flushing cistern, white with inlet ball valve float and handle including bracket fixed etc complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC connection 15 mm bore of length 450mm with PTMT nuts etc complete all as specified and as directed by Engineer-in-charge.
S&F in repair 20 mm dia, D type, 60cm long aluminum anodised towel rail, complete all as specified and as directed by Engineer-in-charge.
S&F in repair 15 mm bore PTMT ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed, complete all as specified and as directed by Engineer-in-charge.
S&F 15 mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/ roofs etc including taking up or down steel tubing and connections upto 15mm bore complete all as specified and as directed by Engineer-in-charge.
All as per Serial item no 36.00 here-in-before but of size 20 mm bore.
Supply and fixing 500 litres capacity rotational moulded HDPE water storage tanks ISI marked (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20 mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.
All as per Serial item no 38.00 here-in-before but of capacity 1000 Litres.
M&L for precast RCC (1:2:4) type B-1 using 20 mm graded mechanically crushed stone aggregate as in landing cover slab for kittchen platform manholes, septic tank set in cement mortor (1:6) including necessary formwork complete all as specified and as directed. (Reinforcement shall be measured separately) including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.
S&F mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and directed by Engineer-in-charge.
S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall complete all as specified and as directed including taking up or down waste and vent pipes of any type complete all as specified and directed by Engineer-in-charge.
All as per Serial item no 42.00 here-in-before but of size 110 mm dia PVC (SWR pipe)
S&F in repair 75 mm dia PVC (SWR) floor trap, with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-charge.
S&F in repair PVC (SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engineer-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed by Engineer-in-charge.
S&F Factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and fixing as per manufacturer's instructuctions complete all as specified and directed by Engineer-in-charge.
S&F 35 mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-charge.
S&F 35 mm thick 2nd class hard wood glazed and skleton shutter, open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), complete all as specified and directed by Engineer-in-charge.
M&L for 2nd class hardwood as in plain, solid straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-charge.
S&F 100mm butt hinges, cold rolled mild steel, medium weight complete all as specified and directed by Engineer-in-charge.
S&F Aluminium anodized barrel tower bolt 150 mm long of extruded section complete all as specified and directed by Engineer-in-charge.
S&F handles, fabricated type, of 100mm longth, extruded aluminium alloy anodized complete all as specified and directed by Engineer-in-charge.
S&F 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair complete all as specified and directed by Engineer-in-charge.
S&F 250 mm long Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed by Engineer-in-charge.
S&F Powder Coated Anodised aluminium frame for doors, windows, parttions, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 9mm thick pre-laminated particle board, interior grade, both side lamination of approved colour and pattern fixed to wooden/ aluminium frame work as in door/ cupboard shutters and necessary fittings complete all as specified including dismantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards, and cover fillets etc, any thickness complete all as specified and as directed by the Engineer-in-Charge.
M&L for PVC edge strip of 18/ 19 mm wide, colour and pattern as approved, fixed with adhesive complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised, bright finish, with 30 mm width of flaps (when open) complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm long extruded stainless steel handles, fabricated type, anodised, complete all as specified and as directed by the Engineer-in-Charge.
S&F Hasp and staple, safety type, of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and as directed by the Engineer-in-Charge.
S&F magnetic steel stopper catcher holder for cup board of approprite shape and size complete all as specified and as directed by the Engineer-in-Charge.
M&L for 18/19 mm Pre-laminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails and fixed to wall with scews or necessary fixing arrangement complete all as specified and as dircted including dsmantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards, kitchen cupboard including piano hinges and handle and cover fillets etc any thickness complete all as specified and as directed by the Engineer-in-Charge.
S&F GI metal suspended ceiling system, GI lay in plain of 600 mm x 600 mm x 0.5 mm (TEGULAR) edge tiles in global white colour to be laid on strong 24 mm Tee section flanges colour white having rotary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mm x 600mm module. Cut cross tees longer than 600mm required independent support. 600mm x 600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres.
(ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x 37x 25x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete including dismantling old U/S ceiling board any thickness including cover fillets all as specified and as directed.
M&L for 6 mm Plywood, grade BWR, type BB, fixed with screws to timber frame work all as specified including dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulationboards etc, any thickness etc. including cover fillets complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc 6 sqcm & n. exc 13 sqcm, ractangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc 13 sqcm & n. exc 25 sqcm, ractangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and as directed by the Engineer-in-Charge.
S&F second class hard-wood (Hollock), timber fixed and clean sawn, in scantlings including dismantling of scantling in any position complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified.
M&L preparation of old painted NTP/ CGI/ PGI or other steel roof surfaces, eaves and gutters etc exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint as approved complete all as specified and as directed by the Engineer-in-Charge.
M&L preparation of new zinc (or galvanized) iron roof surfaces exc 10 cm width/ girth to receive paint by coating mordant solution including washing and cleaning etc. and applying two coats of of synthetic enamel paint, colour and tint as approved over a coat of primer complete all as specified.
S&F for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.
All as per Serial item no. 73.00 here-in-before but plain Galvanised sheet of 0.63mm thick, Mild steel roof sheet.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ clading to wall, fixed with self tapping screws as specified including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern complete all as specified and as directed by the Engineer-in-Charge.
All as per Serial item no. 75.00 here-in-before but plain pre-painted galvalume aluminum zinc coating GI based steel roof sheet.
S&F 2 to 3 mm thick corrugated polycabonate roof cover sheet fixed with coach screw in roof covering/ clading to wall, fixed with self tapping screws including dismantling of roof sheet any type, thickness, complete all as specified and as directed by the Engineer-in-Charge.
S&F 2 to 3 mm thick plain/ textured polycabonate plain roof cover sheet fixed with coach screw in roof covering/ clading to wall, fixed with self tapping screws including dismantling of roof sheet any type, thickness, complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 100 mm MS butt hinges, cold rolled, medium weight, complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 150mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 100mm extruded aluminium anodised alloy handles, fabricated type, complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair Hasp and staple of 100 mm size mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC tiles/ sheets 1.50 mm thick laminated plain coloured, marbled mosaic or motled finish, laid with approved rubber based adhesive in floors incl taking down old sheet complete all as specified and as directed by the Engineer-in-Charge.
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed including demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Framed work such as grills, gratings, railing etc. with ends of bars shouldered and/ or rivetted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified and as directed by the Engineer-in-Charge.
S&F Factory made box type steel window with side hung shutters with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, 2 Nos steel handle, 2 Nos steel pegs and with glazing bars, including flat iron 50 x 6 mm for cover gaps dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by the Engineer-in-Charge.
All as per Serial item No 89.00 here-in before but without glazing bar and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded complete all as specified and as directed by the Engineer-in-Charge.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by the Engineer-in-Charge.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-1 100 mm long (2 Nos) suitable handle (1 Nos). and tower bolt 150 mm (2 No) complete all as specified and as directed by the Engineer-in-Charge.
S&F sheet glass, ordinary quality 5.00 mm thick in aluminium windows of area of each pane n.exc 0.50 Sqm including glazing clips, rubber beading etc, or fixed portion complete all as specificed and directed by Engr-in-Charge.
S&F Figured glass, 5 mm thick, pin head type in aluminium windows of area of each pane n. exc 0.50 Sqm including glazing clip and rubber packing complete all as specified and as directed by the Engineer-in-Charge.
S&F of galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.
S&F powder coated aluminum grill of approved pattern/ design with approved standard section and fixed to the existing window frame with aluminum U clip of appropriate size and CP brass/ stanless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodiesd aluminium standard section around the opening complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor and in foundation including necessary form work complete all as specified and directed including demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing off the rubbish materials complete all as specified and as directed by the Engineer-in-Charge.
M&L for PCC Type B-1 1:2:4 (using 20 mm graded stone aggregates) as in mud stops, rounded or chamfered on edges as in coping, kneelers, appex stone etc including demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials complete all as specified and as directed by the Engineer-in-Charge.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade and laid over and including 50 mm thick sand cushioning complete all as specified and as directed by the Engineer-in-Charge.
All as per serial Item No. 100.00 here-in-before but interlocking paver block with pigment.
M&L for Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors complete all as specified and as directed by the Engineer-in-Charge.
Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer-in-Charge.
Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC casing-n-caping of any size/ dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-
One light / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One two way point controlled by two, two way switches 06 Amps complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 104.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 104.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/ 16 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :-
One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and as directed by Engineer-in-charge.
One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and as directed by Engineer-in-charge.
One two way point controlled by two, two way switches 06 Amps complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 107.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
All as per serial item No 107.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and as directed by Engineer-in-charge.
Supply & fixing switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing of socket outlet 3 pin, 06 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply and fixing bell push flush type , 06 amps , 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and as directed by Engineer-in-charge.
Supply & fixing switch piano flush type, 06 Amps single pole, two way, 240 volts complete all as specified and as directed by Engineer-in-charge.
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repairs LED mirror light 10W, of two feet length, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs of 9/ 10 W LED bulk head luminairies incl LED light with clear prismatic diffuser, driver holder connecting up with three core flexible copper conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge.
S&F in repairs, LED light fitting, 12 watt, Round, surface mounted LED with aluminium housing and high translucent frosted plastic diffuser, Efficiency 100 lumen/watt incl making connections complete all as specified and directed by Engr-in-Charge.
Supply & fixing of ceiling rose, 3 phase, PVC/ polycarbonate isolated body complete all as specified and as directed by Engineer-in-charge.
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and as directed by Engineer-in-charge.
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 4.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed by engineer-in-charge.
M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.0 sqmm, LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/ appropriate dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and as directed by engineer-in-charge.
Note for Serial Item No. 123 & 124.00 : 1. Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. 2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. cutting/ chases in wall including making good of the surface shall be deemed to incude in the quoted rates.
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and as directed by engineer-in-charge.
Supply and fixing sheet metal enclosure, double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/ colour washing/ distempering etc to match the existing disturbed surfaces complete all as specified and as directed by engineer-in-charge.
All as per Serial Item No 126.00 but of 08 way SPN
All as per Serial Item No 126.00 but of 12 way SPN.
S&F in repairs MCB, SP, AC, 240 volts, B curve of capacity 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB, SPN, AC, 240 volts, C curve of capacity 20 Amps to 32 Amps 10kA and making connections with suitable thimble complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB, SPN, AC, 240 volts, C curve of capacity 40 Amps to 63 Amps, 10kA and making connections with suitable thimble complete all as specified and as directed by engineer-in-charge.
Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP-43 & IK 09 protection including provision of four pole 100 Amp isolator as incomer and MCBs of cap 20 to 40 Amps as outgoing with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and as directed by engineer-in-charge.
S&F in repairs MCB 4 Pole 'C' series 63 amps capacity AC 415 V, 10kA complete all as specified and as directed by engineer-in-charge.
S&F in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/ colour washing/ distempering etc to match the existing disturbed surfaces complete all as specified and as directed by Engineer-in-charge.
Supply, laying, commissioning and testing of XLPE under ground LT cable, 1100 volts grade of size 25 Sqmm 3.5 core, armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc including taking down of old unsv cable complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No 136.00 here-in-before, but of size 16 Sqmm, 2 core.
All as per Serial item No 136.00 here-in-before, but of size 10 Sqmm, 2 core.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in any type of soil and gating out complete all as specified and as directed by Engineer-in-charge.
Supply and laying of 50 mm bore HDPE pipe PN-10 with all fittings laid in trenches for cable protection complete all as specified and as directed by Engineer-in-charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and as directed by Engineer-in-charge.
Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and as directed by Engineer-in-charge.
M&L for taking down unserviceable geyser of 25/ 50 ltr capacity from the site after disconnecting the water connection, electric connection, opening the geyser assembly and de-scaling the deposits in the inner container and outlet water pipe set complete all as specified and as directed by engineer-in-charge. Note:- 1. Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. 2. spare parts of gyser other than mentioned above shall be measured and paid for separately under respective items of schedule ‘A’ here-in-after.
Supply & fix in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers complete all as specified and as directed by engineer-in-charge.
Supply & fix in repair of thermostatic switch 11 " long ISI marked complete with electric connection suitable for geyser any Make complete all as specified and as directed by engineer-in-charge.
Supply & fix in repair of geyser element 1.5 / 2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and as directed by engineer-in-charge.
Supply and fix Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as specified and as directed by engineer-in-charge.
Supply & fix in repairs 15mm dia PVC connection 450 mm long, suitable for hot water supply, complete with 2 Nos of brass nuts complete all as specified and as directed by engineer-in-charge.
Supply & fix in repairs 15mm dia PVC connection 450 mm long, suitable for cold water supply, complete with 2 Nos brass nuts complete all as specified and as directed by engineer-in-charge.
Supply & fix in repairs of Zebra fastner of size 12 x 100 mm complete all as specified and as directed by engineer-in-charge.
Supply and fix in repair modular switch socket combination 16 A, 6 pin, 3 module complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair modular switch socket combination 6 A, 3 pin, flush type complete all as specified and as directed by Engineer-in-charge.
S&F in Replacement of Exhaust Fan 250 mm plastic body, 1400 RPM with air delivery 1050 CMH, complete all as specified and as directed by engineer-in-charge.
S&F in Replacement of Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH, complete all as specified and as directed by Engineer-in-charge.
S&F LED Light fittings 1x20 W, 220 V AC, batten type with inbuilt driver, Efficiency : 100 lumen/watt with all accessories, connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and fixing building security LED light, 35 Watt, energy saving LED, made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection including one GI medium grade 25mm dia bracket of total length 50 cm fixed with 2 Nos MS Clamp and fastners including taking down unsv light fitting complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing recess/ surface/ suspended mounting 36W Ultra modern designed architectural 2 x 2 LED luminaire which provides soft light and glare free symmetrical illumination, including all ace ssories for fixing in false ceiling/ ceiling/ in hanging position complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement to existing lamp of any capacity with LED Decor bulb 9/ 10 watt complete all as specified and as directed by Engineer-in-charge.
Supply and fix post top light fitting with LED 20 watt post top light fitting AC outdoor type with decorative post top for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and 20 watt LED lamp complete all as specified and as directed by Engineer-in-charge.
S & F in repair/ replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as specified and as directed by Engineer-in-charge.
S & F in repair/ replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of PVC Plug Top, 6 amps complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of PVC Plug Top 16 amps complete all as specified and as directed by Engineer-in-charge.
M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
Note:- Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length.
Durga Construction
m/s nemichand contractor
Sagar Builders
R. P. Suppliers and Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .