SPECIAL REPAIR AND ADDITION AND ALTERATION TO SECURITY COMPOUND WALL AND ENTRANCE GATE AT OLD OTM COMPLEX ICGS TUTICORIN UNDER GE(I)(CG)CHENNAI

Amount

Demolition of brick work or stone masonry built in cement mortar including all quions,arches,pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and rubbish off the premises to a distance not exc 100m and depositing where directed and serviceable items taken as credit complete all as specified and as directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh any type and taken as credit complete all as specified and as directed.

Demolition of reinforced cement concreteof any description and in any position not otherwise specially provided including removal of debris outside MD land complete all as specified and as directed

Dismantling structural steel work in any position complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation, shafts, wells, cesspits, manholes , pier holes et.and not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Removing excavated soil to a distance not exceeding 50 meter depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including necessary formwork complete all as specified and as directed.

Material and labour Plain cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in surface channels and drain complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solding hearted retaining walls, abutments and similar work built in CM 1:6 complete all as specified and as directed

labour for walling of random rubble, uncoursed, well bonded, bedded and solding hearted retaining walls, abutments and similar work built in CM 1:6 complete all as specified and as directed Note: Stone will be used by demolished Stone Masonary.

Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of10mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of 5 mm dia bar and overupto including 10 mm dia , cut to length, bent to shape required, including stirrups, spacers and binders with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for RCC M30 Design Mix Concrete(using 20mm graded stone aggregater) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses. complete all as specified and as directed.

Material and labour for RCC M-30 (Design mix) ( using 20 mm graded stone aggregate ) as in columns,pillars,piers, posts and struts complete all as specified and as directed

Material and labour for RCC M-30 (Design mix) ( using 20 mm graded stone aggregate ) as in beams, cantilevers,bressummers, lintel over 1.5 m span complete all as specified and as directed

Material and labour for providing cement concrete type B1 1:2:4 using 20 mm graded aggregate as in lintels over 1.5M clear span ,cills, steps, seismic and other similar bands, parapet and railing upto 60 cm in height coping including wethering slightly rounded or chamfered angles and thoarting including necessary form work complete all as specified and as directed

Material and Labour for Steel formwork to sides of concrete foundations, footings, bases of column, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter in flat with rough finished surfacesof concrete complete all as specified and as directed

Material and labour for Steel formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide; with rough finished surfaces of concrete, complete all as specified.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also beams, etc.plays between floors and beams etc complete all as specifed

Material and labour for Steel formwork to sides of pillars, posts, struts, piers, columns etc complete all as specifed and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Grade Fe 410-0W (gde E-240) quality B. complete all as specifed and as directed.

Supply and fix Mild steel flat,angle etc of suitable size as in pickets brackets,post and struts in fencing including cutting top as shape as directed,drilling holes,notching forwire etc flat iron fillets (for securing chain link fencing) and including Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n.exc 5cm long and diameter of shank 11 to 15 mm ends including all necessary drilling ,bolting, rivetting etc and similar work conforming to FE 290 Gde E-165 complete all as specified and as directed.

Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n.exc 5cm long and diameter of shank 11 to 15 mm ends including all necessary drilling ,bolting, rivetting etc and similar work conforming to FE 290 Gde E-165 complete all as specified and as directed.

Supply and fix Galvanised steel Barbed Wire 2 stranded, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of stranded rails straining bolts including securing, or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete, all as specified and as directed (each line wire to be measured) Make :Tata/RINL

Material and labour for Brick work with sub class 'B" brick, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specifed and as directed

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

Material and labour for 15 mm thick Rendering in CM 1:4 on fair faces of brick work surfaces finished inished even and smooth without using extra cement complete all as specified and as directed

Material and labour for Granite stone 20mm thick (black galaxy) work (table rubbed and polished) in single piece in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a backing coat of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Material and Labour for rounding off edges of stone slab one edge, such as in steps , cooking platforms etc and other similar situations complete all specified and as directed.

S&F letters made with titanium gold metal, 1mm thick sheet and suitable width according to the fon & 30cm height and in ARIAL Font etc fix in granite slab with necessary arrangement incl drilling holes and using suitable filler materials and making good complete all as specified.Note : Placement of letters in required shape and design will be approved by Engineer in charge

S & F Indian coast Guard Emblem/Logo 60cm height and 60cm wide made out of 1mm thick titanium gold metal sheet all as per drawing incl fixing arrangement to granite slab / MS gate etc complete all as specified.

Material and labour for flush pointing in CM 1:4 to random rubble masonary, uncoursed or brought upto courses complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick wall or stone masnory , mixed with water proofing compound as per manufacturer’s instruction , finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Supply only Intergal Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

M&L for 40 mm thick Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in sub base of flooring including even and smooth without using extra cement complete all as specified and directed

Supply and spread Moorum/Red Bajri filling in pavings,laid in layers not exceeding 15 cm thick spread and levelled to the shape of mound and ramming including watering complete all as specified and as directed.complete all as specified and as directed.(Measurement after cosolidation)

Material and labour for hardcore of guage n.exc 63mm, broken stone aggregate deposited, spread & leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and Labour for M-Sand Under floors as cushioning to tiles including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be measured and paid

Material and labour for Providing and laying Machine pressed rubber moulded precast concrete interlocking paver block any shape and size of 60mm thickness, M-35 Grade confirming to IS-15628-2006 complete all as specified and as directed., Make: M/S ULTRA TILES / M/s Topaz tiles /M/s Godrek Boyce Mfg Co Ltd , M/s NitcoTiles PVT LTD.

Material and labour for Providing precast cement concrete type B1 1:2:4 using 20 mm graded aggregate as in landing, cover slab(for drains etc) including making of perforated holes including necessary form work complete all as specified and as directed.

Material and labour for Preparation of newly plastered surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Material and labour for complete removal of exisitng treatment on walls including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Material and labour for Preparation of new Steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc primer complete all as specified and as directed..

Material and labour for Preparation of old Steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for Preparation of new plastered or unplastered surfaces of Wall and applying two coat of White wash complete all as specified and as directed.

Material and labour for Preparation of old plastered surfaces of Wall and applying one coat of White wash complete all as specified and as directed.

Material and labour for Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site girth of tree exc 30 cm and n exc 100 cm complete all as specified and as directed.

Removing building Materials etc to distance of 100m or over, beyong the lead included in the rates including loading, unloading and stacking at the destination complete all as specified and as directed.

Supply and fix in repairs LED Post top light fitting 29W, 400K made up of aluminium die cast housing with acrylate reflector material and optical material along with stainless steel fixation material, IP 65 protection complete all as specified and as directed. Make: Philips Cat No: BGP161 LED2500/NW PSU 220-240V 7043 In equivalnet in Crompoton/Bajaj

Material and labour for point wiring with 1.5sqmm (Nominal area) PVC insulated unsheatherd cable FR grade with copper conductors, single core,multi stranded 1100 V ISI marked (IS 694) drawn in concealed conduit including provn of suitable PVC rigid conduit ISI marked (IS 9537 Part III) heavy grade with conduit accessories for one light controlled by one modular switches etcm complete all as specified and as directed.

S KUMARAN