REPAIR AND MAINTENANCE OF BUILDING SECURITY LIGHTS, INTERNAL ELECTRIFICATION OF OTM, PETTYY REPAIRS OF INTERNAL E/M SERVICES AND CONNECTED WORKS AT AFS HAKIMPET

Amount

Taking down copper/ aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials for taking credit and making good disturbed surfaces of walls, floors etc. including paint tuch up to match with the existing surface as per site requirement complete all as specified and directed.

Taking down existing unserviceable MCB /MCCB (any type and capacity) and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed.

Taking down existing unserviceable distribution board, switch fuse unit, enclosureand making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed.

Taking down Existing old UNSV submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so as to match with the existing finishes all as specified.

M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through new PVC conduit of suitable size but not less than 20 mm dia on surface of stone/concrete wall /roof etc all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet with sink into the wall for mounting, 60mm deep covered including laminated sheet cover 3mm thick laminated hylam sheet fixed with cadmium plated screws/PVC gang box fully enclosed type for mounting switches,sockets,fan regulator, etc including making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified.

One light point controlled by one switch

One 3 pin 6 Amps socket point controlled by one switch on same board

One 3 pin 6 Amps socket point controlled by one switch on independent board

One ceiling fan point controlled by one switch and regulator

One bell point controlled by one switch.

All as per item No. 5 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed.

M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through existing concealed PVC/Steel conduit including FRLS, PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet box, 60mm deep covered with 3mm thick laminated hylam sheet fixed with cadmium plated screws for mounting switches,sockets,fan regulator, etc including making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified.

One light point controlled by one switch

One 3 pin 6 Amps socket point controlled by one switch on same board

One 3 pin 6 Amps socket point controlled by one switch on independent board

One ceiling fan point controlled by one switch and regulator

All as per item No. 7 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed.

S&F in replacement of switch piano flush type, single pole one way 6 Amps 240 volts complete all as specified and as directed.

S&F in replacement of bell push,flush type, 6 Amps ,240 Volts ISI marked complete all as specified and as directed.

S&F in replacement of switch socket combination 2 in 1, 3 pin 6 Amps, flush type, universal ,240 volts complete all as specified and as directed.

M & L in replacement of switch socket combination 2 in 1, 3 pin , 6 Amps/16 Amps, flush type,universal,240 volts complete all as specified and as directed

S & F in replacement of Call bell, ding dong, AC 240 Volts

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps flush type complete all as specified and directed.

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz single module size in 5 steps flush type complete all as specified and directed.

S & F in replacement of batten/angle holder, PVC/Polycarbonate type with back plate, 240 V , 50 Hz suitable for batten fittings complete all as specified and directed.

S&F in replacement of ceiling rose 6 A, 3 terminal heavy duty, 65x50mm PVC/ polycarbonate ,insulated body 240 Volt , 50 Hz all as specified and as directed.

M&L for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through existing PVC Conduit in wall/roof surfaces complete all as specified and directed. Note: Three runs of 4.0 Sqmm copper cable shall be measured as one unit length.

All as per item No. 18 here-in-before but with 3 x 6.0 sqmm FRLS PVC insulated copper conductor cable complete all as specified and directed. Note: Three runs of 6.0 Sqmm copper cable shall be measured as one unit length.

M&L for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Conduit and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed. Note: Three runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

All as per item No. 20 here-in-before but with 3 x 6.0 sqmm FRLS PVC insulated copper conductor cable complete all as specified and directed. Note: Three runs of 6.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

M&L for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including Steel Conduit and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed. Note: Three runs of 4.0 Sqmm copper cable and one run of steel conduit shall be measured as one unit length.

Supply and fix distribution board double door type(for incoming MCCB & outgoing MCBs) TPN 8 way vertical type sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed.

All as per item No. 23 above but of TPN 4 way -ditto-.

Supply and fix MCB distribution board double door type SPN 12 way sheet steel powder painted with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and directed.

All as per item No. 25 above but of SPN 8 way -ditto-.

All as per item No. 25 above but of SPN 4 way -ditto-.

Supply and fix in replacement of sheet metal powder painted double pole enclosure with a two pin and earth plug and socket flushing in wall including 20 Amps rated double pole MCB 10 KA, "C" curve complete all as specified and directed.

Supply and fix in replacement of sheet metal powder painted triple pole and neutral enclosure with a three pin and earth plug and socket flushing in wall including 32 Amps rated 415 V, three pole MCB 10 KA, "C" curve complete all as specified and directed.

S&F MCB Triple pole and Neutral (TPN) of capacity 63 Amps 415 volts ,breaking capacity 10 KA,'C' series ,fixed in proper position all as directed.

Supply and fix MCB, SPN, 40 Amps, 240 Volts

Supply and fix MCB , SP, 6 - 32 Amps, 240 Volts,10KA,'C' series

Supply and fixing MCCB 125 Amp four pole 415 Volt, 10KA, 'C' series breaking capacity 25 KA, with adjustable thermal and adjustable magnetic setting complete all as specified and as directed.

Supply and fixing MCCB 100 Amp four pole 415 Volt, breaking capacity, 25 KA, with adjustable thermal and adjustable magnetic setting complete all as specified and as directed.

Supply and Fix in replacement of following items all as specified.

(a) LED driver suitabe for 2x2 LED Panel of any company from 36 watt to 42 watt Make:-Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS / Philips/CG.

(b) LED tube rod 20 watt retofit double ended suitable for existing 36/40 watt FTL batten Make :- Havells - CRYSTAL CRYSTAL 1213T8DSTL20WLED865SGLASS or equivalent in Phillips/CG

(c) Bi-pin Holder suitable for 36/40 Watt batten

Supply & fixing in replacement of wall mounted LED batten fittings with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver for 22W/20W/18W LED (4ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make:-Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS / Philips/CG.

Supply & fixing wall in replacement of mounted LED batten, with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver for 10W LED (2ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. Make:-Havells Cat Part No LUMILINEPLUSBS10WLED865SPCSS / Philips/CG.

S&F LED light fitting in replacement of ,10 watt bulk head luminaries complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Havells Cat No RUGBYNEONFT10WLED860SSYMTOPC or equivalent in Phillips/CG.

Supply & fixing in replacement of high efficacy recess luminaire in replacement of suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 18 W LED 6000K (1ft X 1ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make :- Havells Cat No. LHEAAWP7IL1W018 or its equivalent in Philips/CG.

Supply & fixing in replacement of high efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 36/42 W LED 5700K (2ft X 2ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make :- Philips Cat No. VENUSNEO2X2PLR18-42WLED830MOD or its equivalent in Havells/CG.

Disconnecting ceiling fans of any sweep and from any height including electrical connections, bringing down, dismantling, opening up, cleaning internally and externally, overhauling by replacing unserviceable items such as split pins, bearings, bushes, copper flexible cord, cotter pins and check nuts etc, lubrication with approved lubricants, reassembling including replacement of worn-out /defective parts and refixing for smooth functioning and connecting cable from ceiling rose to fan including testing complete all as specified and directed.

S & F Capacitor 2.5 mfd capacity 240 volts. Make : CAPCO/TIBCON

S & F Ball bearing of suitable size. Make : NBC/SKF/TATA.

S & F Gun metal bush

S & F Copper flexible cord 3 core of size 23/00076

S & F Fan Clamp with rubber bush

S & F Down rod, 400 mm long

S & F Painting of Fan of any size and make.

Description all as per Ser item No.41 above but here in before exhaust fan /wall mounting fan/Padestal fan of sweep 230/300/375/450 mm complete all as specified and as directed.

S & F Capacitor 4 mfd capacity 240 volts . Make : CAPCO/TIBCON

S & F Ball bearing of suitable size . Make : NBC/SKF/TATA Notes for item No 41 & 49 :- Replacement of unserviceable spare part required for servicing/overhaulingand rewinding of fans shall be measured and paid separately under relevent items after testing and commissioning vide relevent Item of this schedule.

Taking out burnt copper winding wire from fan, cleaning the rotor shaft properly and rewinding with new super enamelled copper winding wire as per existing size/ gauge including heating/ varnishing etc complete as per manufacturer's design for the following fans:-

(a) Ceiling fan of 1200/1400 mm sweep

(b) Exhaust fan of 230/300 mm sweep

(c) Exhaust fan of 375/450/305/380 mm sweep

(d) Wall mounting/Padestal fan of 400/450 mm sweep

S & F in replacement of louvers with suitable frame work and fixing arrangements for exhaust fan of any size sweep complete including removing the existing unserviceable one all as specified and directed.

S & F in replacement of flap cover with suitable frame work and fixing arrangements for exhaust fan of size 230/300/450 mm sweep complete including removing the existing unserviceable one all as specified and directed by the Engineer-in-Charge.

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and reassembling in all respects after replacing unserviceable parts/components and testing for proper working after repairs and refixing in the original place/position duly connecting up water supply and electric supply etc.complete all as specified and as directed by the Engineer-in-Charge. Note :- Spare parts replaced shall be measured and paid separately vide 56 (a) to 56 (d) . However labour cost of replacement is deemed to be included in the rate quoted.

Supply only the following parts in repair of water heater (Electric Geyser) storage type of given make and size complete all as specified and as directed by the Engineer-in Chargre :-

(a) Thermostat suitable for 25/50 litre capacity . Make - Sphare hot /bajaj/ditz/picco/usha /racold .

(b) Heating element 1500 watt 240 volts push/thread type circular/ triangular base for any make and type Make - bajaj / Racold

(c) Heating element 2000 watt push/thread type circular /triangular base suitable for any make and size. Make - bajaj / Racold

(d) Indicator bulb 240 V suitable for given make, type and model

S & F in replacement of pressure release valve suitable for 25/50 litre capacity geyser including taking out the existing unserviceable one all as specified and directed. Make -Sphare hot /bajaj/ditz/Picco/usha .

S & F in replacement of gasket rubber suitable for geyser of capacity 25/50 litre including taking out the existing unserviceable one complete all as specified and directed.

S & F in replacement of non return valve gunmetal for 15 mm bore with suitable fittings. Make - Kirloskar / Leader /Kartar .

S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for cold water connection.

S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for hot water connection.

S & F in replacement of PVC insulated and PVS Sheathed round Copper Cable flexible 3 core x 2.5 Sq mm from Geysers to socket.

S & F in replacement of PVC insulated and PVS sheathed flexible Copper Cable 3 core x 4.0 Sq mm from Geysers to socket.

S & F in replacement of plug top 3 pin 6 Amps 240 volts. Make : Anchor/Leader/Havells.

S & F in replacement of plug top 3 pin 16 Amps 240 volts. Make : Anchor/Leader/Havells.

Supply and fixing in rplacement of Weather proof flat twin core service cable size 16 Sq mm aluminium conductor PVC insulated and PVS sheathed.

Supply and fixing in rplacement of Weather proof flat twin core service cable size 10 Sq mm aluminium conductor PVC insulated and PVS sheathed.

S & F in replacement of apparatus plate (bottom plate in which element and thermostat are fixed) complete suitable for 25 ltr capacity geyser including taking out existing unserviceable one all as specified and directed.

Maintenace of solar water heater of capacity 200/300/500 Ltr Capacity and checking the FPC collector,tank insulation and flanges all defective to be replace and paid separately under relavent item No-70 (a) to (d).

Supply only following parts of solar water heater storage type of existing make and size complete all as specified and as directed.

(a) Aluminium dummy gascut as per existing size.

(b) EPDM Hole gascut as per existing size.

(c) Brass Flange as per existing size.

(d) Threaded Flange as per existing size.

S & F in replacement of apparatus plate (bottom plate in which element and thermostat are fixed) complete suitable for 50 ltr capacity geyser including taking out existing unserviceable one all as specified and directed.

Material and labour in replacement of earthing complete with galvanised earth plate electrode 600mm x 600 mm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth strip protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, earth lead & protection pipe upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

Repairing/overhauling of TPN/SPN DBs of any size/type fixed on building wall incl cleaning with compressed air, tightening of all electric connection to the bus bar & switch gears , refixing of loosed doors with proper fixing & locking arrangement & necessary welding work as required and replacement of wornout/ burnt/rusted/ loose lugs , door lock, nut bolt,hing, washers,internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire ,repair to plaster work as require at site and including disconnection of all cable/ sub main from the bus bar and insulating the neked portion of Al conductor and re-connect the same after repair of panel and proper connection of main earth wire/lead with panel body using lugs complete all as specified and directed.

S&F in replacement of flame proof weather proof LED Tube light fitting suitable for 2 x 18 Watt (4 feet) with borosil make glass & connector suitable for 2 x 18 Watt LED tube light, including all accessories complete all as specified.

S&F in replacement of LED security light fitting 25 watts with high efficiency long life LEDs In-built replaceable electronic driver complete housed in pressure die-cast aluminium alloy covered with polycarbonate cover with IP66 degree of protection and fixing on existing bracket on OTM & Md accn duly removing existing unserviceable street light fitting complete all as specified and directed. Make: Havells Cat No. ENDURAPEARLPLUSSL25WLED757SASYTOPC or equivalent in Phillips/ Wipro

M&L in replacement of GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Security Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed.

Supply, install and testing in replacement of maintenance free chemical earthing system confirming to IS: 3043 and as per the detailed specification given below :-

(a) Earth Electrode : The Earth electrode shall be non-corrosive, solid copper round rod of size 17.20mm dia, 3000mm long, made of high tensile low carbon steel with molecularly bonded copper coating of thickness 250 microns on the outside.

(b) Bore hole : The electrode shall be installed in a 100mm dia 3000mm deep augured bore hole.

(c) Ground enhancing compound : The augured bore hole shall be filled with highly conductive and eco friendly ground enhancing carbon based backfill compound suitable for any type of soil. The quantity of ground enhancing compound shall not be less than 30 Kg per pit.

(d) Earth termination clamp : The electrode shall be provided on its top with an earth termination clamp made of electrolytic grade copper for connecting earth continuity conductor with stainless steel hardware.

(e) Earth chember : PCC chamber 300 x 300 x 300mm with cover shall be provided on the top of the earth system on 100mm thick PCC 1:3:6 bed concrete. The Chamber shall be flushed with the ground surface.

(f) Earth point test box: Copper strip of size 25X3 mm size, 200mm long mounted on insulators and enclosed in MS sheet box made of 2 mm thick and size 250X200X120 mm sloped top outdoor type duly painted with two coats of synthetic enamel paint over a coat of red oxide primer shall be provided at a suitable location.

(g) Copper Strip : Copper strip of size 25X3 mm from earth pit to test point box upto 7.5 meter.

Material and Labour for earthing pit display boards made out of 3mm thick MS sheet of size 30 x 35cm welded to 75cm long 25 x 25 x 5 mm thick MS angle iron grouted in PCC 1:3:6(with 20mm stone aggregate) to a depth of 20 cm and applying two coats of synthetic enamel paint of approved color over a coat of red oxide primer and writing the letters on plate for showing the following details: 1. EARTHING PIT NO. : 2. DATE OF MEASUREMENT : 3. NEXT DUE DATE : 4. STANDARD VALUE : 5. VALUE OBTAINED : 6. MEASURED BY : 7. SUPERVISED BY :

S&F in replacement of switch Modular type single pole one way 6 Amps 240 volts complete all as specified and as directed.

S&F in replacement of switch Modular type single pole one way 16 Amps 240 volts complete all as specified and as directed.

S&F in replacement of bell push,modular type, 6 Amps ,240 Volts ISI marked complete all as specified and directed.

S&F in replacement of socket 2 in 1, 3 pin 6 Amps, modular type, universal ,240 volts complete all as specified and as directed

S&F in replacement of socket 2 in 1, 3 pin 16 Amps, modular type, universal ,240 volts complete all as specified and as directed

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps modular type complete all as specified and directed.

K LAKSHMAN SINGH AND CO