Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.9 L
Closing Date
7 Aug 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGG
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- C-2: Any Civil Engineering Works (excluding Track works / Zonal works).
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e OS/Tenders/Engg/SC Division) as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Signalling arrangements for strengthening of power supply at Raghavapuram (RGPM) and Peddampet (PPZ) stations. (Construction of two numbers of end goomties at RGPM station and construction of one no of end goomties at PPZ station).
113_N_SC_26_OT
113_N_SC_26_OT
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹2.9 L
7 Aug 2026
17 Jul 2026
24 Jul 2026
101 items across 5 schedules · ₹1,70,19,931.14 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 112.5 | 177.5 | 19,968.75 |
| 2 | All kinds of soil. | cum | 850 | 260.3 | 2,21,255 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. | Metre | 75 | 215.6 | 16,170 |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 75 | 352.15 | 26,411.25 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 407.5 | 196 | 79,870 |
| 6 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 190.5 | 700.5 | 1,33,445.25 |
| 7 | All kinds of soil | cum | 285 | 126.8 | 36,138 |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 235 | 2,123.75 | 4,99,081.25 |
| 9 | All kinds of soil | Sqm | 540 | 34.15 | 18,441 |
| 10 | Foundations, footings, bases for columns | Sqm | 195 | 392.15 | 76,469.25 |
| 11 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 210 | 392.15 | 82,351.5 |
| 12 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 330 | 842.5 | 2,78,025 |
| 13 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 330 | 927.25 | 3,05,992.5 |
| 14 | Shelves (Cast in situ) | Sqm | 60 | 927.25 | 55,635 |
| 15 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 630 | 736.4 | 4,63,932 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 135 | 961.3 | 1,29,775.5 |
| 17 | Under 20 cm wide | Metre | 135 | 208.55 | 28,154.25 |
| 18 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 37.5 | 951.1 | 35,666.25 |
| 19 | 50 mm thick | Sqm | 100 | 1,886.9 | 1,88,690 |
| 20 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 10.28 | 733.5 | 7,540.38 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 15 | 7,132.25 | 1,06,983.75 |
| 22 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 15 | 9,105.95 | 1,36,589.25 |
| 23 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm / 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. | cum | 10 | 10,195.45 | 1,01,954.5 |
| 24 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 150 mm to 300 mm thick with Grade -1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in- Charge. (The payment of RCC band and reinforcement shall be made for separately). | cum | 210 | 8,333.65 | 17,50,066.5 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 175 | 7,311.25 | 12,79,468.75 |
| 26 | Area of slab upto 0.50 sqm | Sqm | 39 | 5,413.5 | 2,11,126.5 |
| 27 | Second class teak wood | cum | 1.12 | 1,42,949.7 | 1,60,103.66 |
| 28 | 35 mm thick shutters | Sqm | 18 | 4,111.95 | 74,015.1 |
| 29 | Second class teak wood | Sqm | 18 | 3,323.2 | 59,817.6 |
| 30 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | Sqm | 51 | 1,800.45 | 91,822.95 |
| 31 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 18 | 2,392.65 | 43,067.7 |
| 32 | On one side only | Sqm | 18 | 478 | 8,604 |
| 33 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 36 | 228.85 | 8,238.6 |
| 34 | 125x65x2.12 mm | Each | 36 | 55.75 | 2,007 |
| 35 | 300x16 mm | Each | 9 | 216.55 | 1,948.95 |
| 36 | 250x10 mm | Each | 9 | 83.9 | 755.1 |
| 37 | 125 mm | Each | 24 | 39.95 | 958.8 |
| 38 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | Each | 3 | 983.15 | 2,949.45 |
| 39 | Twin rubber stopper | Each | 12 | 72.35 | 868.2 |
| 40 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 43.2 | 10,993.55 | 4,74,921.36 |
| 41 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 192 | 1,328.35 | 2,55,043.2 |
| 42 | Acid and alkali resistant tile | Sqm | 162 | 1,738.15 | 2,81,580.3 |
| 43 | Acid and alkali resistant tile | Sqm | 112.5 | 1,884.9 | 2,12,051.25 |
| 44 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 112.5 | 1,112.7 | 1,25,178.75 |
| 45 | Size of Tile 600x600 mm | Sqm | 195 | 1,553.45 | 3,02,922.75 |
| 46 | Size of Tile 600x600 mm | Sqm | 22.5 | 1,623.05 | 36,518.63 |
| 47 | 110 mm diameter | Metre | 135 | 377.4 | 50,949 |
| 48 | 110 mm bend | Each | 24 | 150.35 | 3,608.4 |
| 49 | 110 mm Shoe | Each | 24 | 131.85 | 3,164.4 |
| 50 | 110 mm | Each | 96 | 371.3 | 35,644.8 |
| 51 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | Each | 24 | 54.7 | 1,312.8 |
| 52 | 1:6 (1 cement: 6 coarse sand) | Sqm | 1000 | 343.65 | 3,43,650 |
| 53 | 1:6 (1 cement: 6 coarse sand) | Sqm | 1300 | 395.35 | 5,13,955 |
| 54 | New work (three or more coats) | Sqm | 750 | 39.05 | 29,287.5 |
| 55 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 1080 | 185.65 | 2,00,502 |
| 56 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 1545 | 116.9 | 1,80,610.5 |
| 57 | Two or more coats on new work | Sqm | 45 | 155.9 | 7,015.5 |
| 58 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 750 | 156.05 | 1,17,037.5 |
| 59 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 200 | 263.95 | 52,790 |
| 60 | 100 mm diameter | Metre | 150 | 443.6 | 66,540 |
| 61 | 150 mm diameter | Metre | 151 | 695.8 | 1,05,065.8 |
| 62 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 3 | 12,770.55 | 38,311.65 |
| 63 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 75 | 530.9 | 39,817.5 |
| 64 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 51 | 1,505.25 | 76,767.75 |
| 65 | Upto 5mm depth and 5 mm width | Metre | 112.5 | 96.75 | 10,884.38 |
| 66 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 6 | 1,509.8 | 9,058.8 |
| 67 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in- charge. | cum | 3 | 1,538.25 | 4,614.75 |
| 68 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. | cum | 3 | 1,538.25 | 4,614.75 |
| Schedule total | ₹1,03,27,777.51 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Mastertenderbooklet2ason26.03.2026.pdf
ATTACHMENT
Mastertenderbooklet1ason26.03.2026.pdf
ATTACHMENT
Special conditions for tender
ATTACHMENT
ScopeOfwork.pdf
ATTACHMENT
STCableconditions.pdf
ATTACHMENT
MasterDocumentforSpecialConditionsforcontractsforCivil-Buildingworks-Correctedon10.03.2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .