Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹13.7 L+₹1.2 L (9.40%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹14.2 L+₹1.7 L (13.3%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹15.3 L+₹2.8 L (22.4%)Rejected-Finance BETONG SHOP KHANGSAR COMPLEX NOWSHARA LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L4 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
13 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
PETTY DAY TO DAY B/R REPAIRS VARIOUS TEMP AND PERMT BLDGS AT KHUMBATHANG UNDER GE KHUMBATHANG
2023_MES_590007_1
80051/03/E8
Open Tender
Miscellaneous Works
Item Rate
330 days
khumbathang
as per tender and nit doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹30,000
27 Jun 2023
18 Apr 2023
15 May 2023
18 Apr 2023
13 May 2023
1 May 2023
Amount
Demolition of precast concrete block masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6) complete all as specified. and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 10 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L for 50mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in plinth protection/floors/paving/path including provision of necessary form work finishing the exposed surface even and smooth complete all as specified.
M&L for 100 mm PCC cement concrete, type B-1, 1:2:4 (20 mm graded crushed stone aggregate) in sub-floor, sub-base, floors and pavings etc. finishing concrete surface evan and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for 1:3:6 type C-2 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and directed by Engr-in-Charge.
M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L 25mm thick cement concrete 1:2:4 type B-2(12.5 mm graded aggregate) as in floor or similar works complete all as specified and directed by Engr-in-Charge.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.11 and n.exc 0.18 Sqm in floors etc over 15mm screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7mm/ 450X 350X 7mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4)
M&L for Vitrified ceramic (Light Shade) tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed with CM(1:4) 15mm thick for laying floor tiles complete all as specified and directed by Engr-in-charge.
M&L for Vitrified ceramic (Light Shade) tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing layer with CM(1:4) 15mm thick for laying wall tile complete all as specified and directed by Engr-in-charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on ceiling complete all as specified and directed Engr-in-Charge.
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings 40 sq. cm and over in section unframed work, in any position complete all as specified and directed by Engr-in-Charge.
M&L for Second class hard-wood in scantlings clean sawn timber fixed with nails complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in framed work, in any position complete all as specified and directed by Engr-in-Charge.
M&L Plain fillets of second class hard wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L Plain fillets of second class hard wood, sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L Plain fillets of second class hard wood, sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L Plain fillets of second class hard wood, sectional area not exceeding 3 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads in beadings complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 15 mm pipe complete all as specified and directed by Engr-in-Charge
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 20 mm pipe complete all as specified and directed by Engr-in-Charge
Refixing 15mm tubes any grade old steel tubing and connections in new or old position (Walls, ceiling, floors, etc
Refixing 20mm tubes any grade old steel tubing and connections in new or old position (Walls, ceiling, floors, etc
S&F 16mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F in repairs for 15 mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore stop valves/angle valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 20 mm bore stop valves/angle valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each and refixing in the same opening complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)complete all as specified and directed by Engr-in-Charge.
S&F in repairs of plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd Class hardwood complete all as specified and directed by Engr-in-Charge.
M&L for 30mm thick of 2nd class softwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
S&F in repair for aluminium extruded section door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
M&L for 35mm thick of 2nd class softwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers to chowkats for doors complete all as specified and directed by Engr-in-Charge.
S&F 100mm long, mild steel butt hinges, medium weight, cold rolled complete all as specified and directed by Engr-in-Charge.
S&F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed by Engr-in-Charge.
S&F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed by Engr-in-Charge.
S&F 150mm long mild steel pressed handle oval type stove enamelled black complete all as specified and directed by Engr-in-Charge.
S&F 125mm long mild steel pressed handle oval type stove enamelled black complete all as specified and directed by Engr-in-Charge.
S&F 200mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-in-Charge.
S&F Flat Iron as in bands, straps, hold fast, twist clamp , two way or three way strap and similar articles conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.
S&F in replacement of 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) with plastic lid cover, triple layer, hoisted and fixed in position as specified in SSR Part-I including dismantalling of old tank complete all as specified and directed by Engr-in-charge.
S&F in replacement of1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) with plastic lid cover, triple layer, hoisted and fixed in position as specified in SSR Part-I including dismantalling of old tank complete all as specified and directed by Engr-in-charge.
S & F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
S & F in repair vitreous china water closet squatting pan ‘Orrissa pattern” size 580x440mm white with integral foot rests including provision of of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface jointing to PVC/CI bend and flush pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repair PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs white with inlet ball valve float and handle incl bracket, and connections to pipes and fixing of chain and pull, or lever, if anycomplete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china wash down pedestal pattern EWC, white water closet pan with integral trap including seat cover, making necessary connections to drain and to flushing pipe antisyphonage pipe etc. jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed by Engr-in-Charge.
Supply and fix in repairs vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 40gms) complete all as specified & directed.
S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
M&L for preparation of wood and wood based material surface of any descriptiony description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L for 3 coats of white wash on new plastered surfaces of wall including preparation of surfaces all as specified and as directed.
M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of oil emulsion distemper over and including one coat of chalk whiting preparatory to distempering complete all as specified and directed by Engr-in-Charge.
M&L for 100 mm PCC cement concrete, type C-2, 1:3:6 (40 mm graded crushed stone aggregate) in path and pavings etc. finishing concrete surface evan and fair without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrte tile coloured 20x20x25mm thick with grey cement and pigment confirming jointed and pointed in neat cement slurry in floor including laid over 20mm thick screed bed of CM 1:4. complete all as specified and directed by Engr-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, plain mild steel sheeting in ridge, hips, valley gutters, drips andd straight flashings (length and girth as fixed)with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Credit Note:- The accepted amount will arrived after deducting the sch of credit i.e. 30,015.00
KASHMIR FAIR DEAL SERVICES
M/S RW INFRA
M/s Siachen Construction Co.
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .