Renovation Re-habilitation to old building Directorate of Elementary Education Shimla-1 SH- Repair of cracks of walls, flooring, ceiling, plastering, painting and distempering etc.

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all leads as per direction of Engineer - in- charge including carriage of materials in all leads and lifts.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads as per direction of Engineer-in-charge.- In cement mortar including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads Of area 3 sq. metres and below including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within all leads Of area 3 sq. metres and below including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within all leads Of sectional area 40 square centimetres and above including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within all leads of G.S. Sheet including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge. G.S. Sheet/prepainted sheet.

Dismantling of wooden floors upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials (joists to be measured and paid for separately) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all leads For thickness of tiles 10 mm to 25 mm including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) within.all leads and lifts as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral staircases including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge Size of Tile 300mm x450mm.

1.5 mm thick pvc/rubber tiles flooring of approved quality & design plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment (to be measured separately) for payment including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.:- 2nd class deodar wood.

Providing wood work in frames of false ceiling, partition etc. sawn and and putup in position including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge Second class chil/rai wood.

Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge in 2nd class deodar wood.

Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

Providing and fixing 12mm thick wooden plank ceiling with tongued and grooved pointing and wood screws (frame work and cover fillets to be measured and paid for separately) in 1st class Rai wood complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

25 mm wooden planking tongued and grooved, in flooring fixing to wooden base frame with iron screws complete (base wooden frame to be paid separately) First class deodar wood planks including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in first class deodar wood.

Providing and fixing 6mm thick ply wood ceiling/lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing hard wood square edged cover fillets (beading) 60mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. i) 125 mm including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete Triple strip vertical type including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge..

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing ACP sheet 3mm thick in aluminium ceiling/lining/partitions with PVC neoprens gasket fixed with self drilling screws etc. complete as per Architect drawings and by the Engineer-in-Charge including carriage of materials within all leads and lifts. (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing sliding channels with roller of required size of standard quality with necessary screws/nails etc complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and laying vitrified floor tiles 600x600mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.- Fixed to steel windows by welding including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m²as per the direction of Engineer in Charges including carriage of materials within all leads and lifts.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all leads and lifts.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 2mm thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge (Base members of steel work shall be measured and paid separtely) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.-110 mm diameter including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion :-Bend (plain) 110 mm bend including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Shoe (Plain) 110 mm Shoe.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 9mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials and as per the direction of the Engineer-in-Charge.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Painting on wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm) including carriage of materials and as per the direction of the Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials in all leads and lifts.

Providing and fixing high pressure PVC Finolex Type B spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge:-110mm dia.

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.:-110mm dia.

Providing and fixing PVC Finolex Type B collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.:-110mm dia.

Providing and fixing PVC finolex Type B plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.:-110mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.-32 mm dia including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing toilet paper holder C.P. brass including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing soap dish wall mounted including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge ESS ESS AC-503 B.

Providing and fixing towel rail (61Cm) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge. ESS ESS AC-501

Providing and fixing bib without flange (foam flow) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge. ESS ESS-C-120.

Providing and fixing angular stop cock without flange including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.Croma-C-204.

Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing 15 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Supplying, drilling & fixing Mechanical PVC cement slurry injecton packers 1000mm length X 10mm diameter insertable along the foundation @ 1500 mm for injecting free flwing cement slurry, including all required tools and tackles, equipment-drilling machine, at locations as directed by engineer -in-charge. Providing and injecting free flowing cement slurry on average consumption of 10ltre per packer including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Supplying drilling & fixing packers 13mmX100mm at gap of 1.0ft-1.5ft in zig zag manner along the structural cracks by setting compound method for injecting PU Grout material (4' to 6" thickness RCC), including all required tools and tackles,equipment-drilling machine,at locaions as directed by engineer-in-charge. Providing and injecting Foaming PU Grout on average consumption of 450ml per packer for 4"-6" thick concrete/wall including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Supply and Application of Epoxy Grouting for addressing crack ares in brick walls and he surface to be cleaned enough to assert the exact location of source of problem. Providing and fixing mechanical packers 100mm X10mm into the crack walls as per the company instructions . The drilled hole would be cleaned prior to fixing of packers. The packers would be spaced at 150mm depending upon the severeity of the problem and cracks to be sealed with the seal the crack using Epoxy Putty (DEP-009) and fix the pedstals for injectors Providing and injecting epoxy mx DEL 090 in the ratio of 2:1 (2 Resin :Hardner) throughcompany provided injectors including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Supplying, drilling & fixing Custom made NRV Packers 2000mm X 13mm at gap 1.5m in along the foundation by setting Compound Method for injecting PU Grout Material including all required tools and tackles, equipment-drilling machine, at locations as directed by engineer-in-charge. Providing and injecting Foaming PU Grout on average consumption of 2 litre per packer including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

SUDHEER THAKUR

Bhupinder Narwal