Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ok |
Tender Value
Refer Docs
Closing Date
16 Jul 2026, 6:00 pmClosed
EE PHED DIV AMET
EE PHED DIV AMET
RATE CONTRACT FOR MAINTENANCE AND RESTORATION OF SOLAR SYSTEMS UNDER DIVISION AMET
2026_PHCJA_574810_1
33/2026-27
Open Tender
Civil Works - Water Works
Percentage
AMET
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
EE PHED DIV AMET
Exempted
17 Jul 2026
16 Jul 2026
17 Jul 2026
16 Jul 2026
16 Jul 2026
16 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably design to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge.
Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document. | 1 | WATT | 43 | ₹43 |
| 2 | Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS fabricated structure 120 micron hot dip galvanized iron , showing arrangement of panel in available space and installation of PV module on frame structure such that minimum height of lower edge of panel shall be 4.0 mtr from ground level to safeguard against damage and theft as per indicative drawing enclosed with the bid document. The foundation of structure shall be in RCC. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge.
Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document. | 1 | WATT | 60 | ₹60 |
| 3 | Providing, installation, testing and commissioning of AC submersible pump sets with inbuilt or individual solar pump controller with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps..
Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope .
Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date.
The duty condition of pump set shall be as per scope of work and entire work shall be executed as per technical specification and direction of Engineer in charge. | - | - | - | - |
| 4 | 0.75 KW (1.0 HP) | 1 | Each | 74,206 | ₹74,206 |
| 5 | 1.5 KW (2.0 HP) | 1 | Each | 79,201 | ₹79,201 |
| 6 | 2.2 KW (3.0 HP) | 1 | Each | 1,14,790 | ₹1,14,790 |
| 7 | 3.7 KW (5.0 HP) | 1 | Each | 1,47,415 | ₹1,47,415 |
| 8 | Supply, installation, testing and commissioning of DC submersible pump sets with inbuilt or individual solar pump controller with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps.
Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope .
Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch suitable for DC use is to be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date.
The duty condition of pump set shall be as per scope of work and entire work shall be as per technical specification and direction of Engineer in charge. | - | - | - | - |
| 9 | 0.75 KW (1.0 HP) | 1 | Each | 1,12,033 | ₹1,12,033 |
| 10 | 1.5 KW (2.0 HP) | 1 | Each | 1,31,843 | ₹1,31,843 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
TD_33.pdf
Tender Documents • 3.09 MB
BOQ_1023193.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .