Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.3 LAccepted-Finance | L1 | Accepted-Finance Less than L2 and L3 | |
| 2 | L2₹54.4 L+₹4.1 L (8.22%)Accepted-Finance | L2 | Accepted-Finance Greater than L1 and Lower than L3 | |
| 3 | L3₹64.7 L+₹14.4 L (28.7%)Accepted-Finance | L3 | Accepted-Finance Greater than L1 and L2 |
| Sl No | Description | Qty | Unit | AAYANSH ELECTRICAL SOLUTIONS L1 | M/s Ashu Brothers L2 | BHARDWAJ ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km) | 10 | Qtl. | 450 ₹4,500 Lowest | 500 ₹5,000 | 4,500 ₹45,000 |
| 2.00 | Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km). | 37 | Nos. | 1,200 ₹44,400 | 1,000 ₹37,000 Lowest | 4,500 ₹1,66,500 |
| 3.00Carriage of following capacity transformer from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km). | ||||||
| 3.01 | (a) 10/16 KVA | 16 | Nos. | 2,700 ₹43,200 Lowest | 3,000 ₹48,000 | 3,000 ₹48,000 |
| 3.02 | (b) 25 KVA | 3 | Nos. | 2,900 ₹8,700 Lowest | 3,100 ₹9,300 | 3,500 ₹10,500 |
| 3.03 | (c) 63 KVA | 4 | Nos. | 3,000 ₹12,000 Lowest | 3,100 ₹12,400 | 4,000 ₹16,000 |
| 3.04 | (d) 100 KVA | 1 | Nos. | 3,200 ₹3,200 | 3,150 ₹3,150 Lowest | 5,000 ₹5,000 |
| 3.05 | (e) 250 KVA. | 43 | Nos. | 4,500 ₹1,93,500 Lowest | 5,000 ₹2,15,000 | 5,500 ₹2,36,500 |
| 4.00 | Erection & Fixing of PCC Pole 8.5 mtr. Long in 11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge. | 14 | Nos. | 3,500 ₹49,000 | 3,000 ₹42,000 Lowest | 6,500 ₹91,000 |
| 5.00 | Erection & Fixing of PCC Pole 8.5 mtr. long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts, as per direction of site incharge. | 23 | Nos. | 3,400 ₹78,200 | 3,200 ₹73,600 Lowest | 6,500 ₹1,49,500 |
Tender Value
₹52 L
EMD Value
₹52,000
Closing Date
18 Sept 2025, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPERINTENDING ENGINEER
SUPERINTENDING ENGINEER EDC HAPUR
FOR CAPACITY ENHANCEMENT WORK OF DISTRIBUTION TRANSFORMERS OF VARIOUS CAPACITIES AND INSTALLATION OF NEW TRANSFORMERS UNDER BUSINESS PLAN 2025-26 IN THE AREA OF EDD-GHARMUKTESWAR, UNDER EDC., HAPUR.
2025_PVVNL_1071958_1
31(W)/EDCH/2025-26
Open Tender
Electrical Works
Item Rate
HAPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SUPERINTENDING ENGINEER, EDC, HAPUR
₹52,000
Yes
26 Sept 2025
6 Sept 2025
18 Sept 2025
6 Sept 2025
18 Sept 2025
6 Sept 2025
Amount
Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km)
Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).
Carriage of following capacity transformer from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).
Erection & Fixing of PCC Pole 8.5 mtr. Long in 11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.
Erection & Fixing of PCC Pole 8.5 mtr. long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts, as per direction of site incharge.
Safely installing the New following capacity transformer with the help of crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction of site incharge and making Connection for proper energization of transformer
Laying of Three Phase LT ABC 3x120/ 3x50 Sq.mm and complete work properly, as per RESPO/Norms, and as per direction of site incharge.
Prividing & Fixing of Distribution Box on pole by provding 02 Nos. D/B Clamps & proper size nut & bolts, as per direction of site incharge.
Providing and fixing of Suspension Clamp with Eye Hook as per RESPO/Norms and as per direction of site incharge.
Providing and fixing of Dead End Clamp with Eye Hook, as per RESPO/Norms and as per direction of site incharge.
Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.
Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.
Grouting of PCC Pole 8.5 mtr. Long supports in CC 1:3:6 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.
Wrapping of barbed wire on PCC Pole 8.5 mtr. as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P., as per direction of site incharge.
Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO/ Drawing Norms and as per direction of site incharge.
Construction of T/F plinth suitable for 250 KVA T/F (size of 2 x 2 x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:3:6 (Cement, Sand & Brick ballast). Ist class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 after duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour, as per direction of site incharge.
Erection & Fixing of 11KV. Fuse set on PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge. (Only Fuse Set and necessary Angle, channel will be provided by the Department.
Construction of safety fencing (MS) size 3x3x2 mtr. for Transformer 11/0.4 KV Sub Station, With supply of material required for MS fencing (50X50X3 MM) M.S. wire mesh construction utilizing vertical post duly grouted/fitted in ground/on floor. Horizontal angle/T-iron to be fitted on vertical posts. Pickets (if required) fitted to rail and gate to facilitate entry and exit. The vertical Posts/Horizontal post shall be made of M.S. angle 75x75x6mm. Such post shall be kept preferably at distance of 800-1000 MM. and shall be grounded with CC ratio 1:4:8. The length of vertical post shall be sufficient to take care of fencing as requirement at site, and as per direction of site incharge.
Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.
Safely dismantling/removal and carriage of old & used ACSR Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Saftly dismantling work properly and carriage of old & used 100/160 KVA T/F from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Providing and installation of maintenance free multifaceted proactive and corrosion free chemical earthing electrod size 80mm x 3000mm complete with 50KG backfill compound with all required accessories for Body/neutral earthing of Transformers, including cost of M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms and as per direction of site incharge.
Laying of LT PVC cable 3.5x400 Sq.mm. with fixing Aluminium Lug for making connection to distribution transformer
Laying of LT PVC cable 1x240/ 1x400 Sq.mm. with fixing Aluminium Lug for making connection to distribution transformer
Supply, Fabrication and fixing Copper L pieces 62x225x300 mm with LT side of distribution Transformer as per JE/SDO
Supply, Fabrication and fixing LT incoming pannel with LT VCB 300 Amp. Three Phase 440 volt with DT as per site incharge (All material will be provide by contractor)
Supply and fixing of LT fuse set as per RESPO/Norms in box and make for proper running (All material will be provided by contractor)
M/s Ashu Brothers (BID ID -5542843)
BHARDWAJ ENTERPRISES (BID ID -5534869)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .