SPECIAL REPAIR FOR CONVERSION OF LT OVERHEAD LINE TO UG CABLE AT RANGIA MILITARY STATION UNDER GE RANGIA

Amount

Dismantling LT over head ACSR conductor of any size including separating, serviceable conductor and kept in safe custody for re-use in the work and removing unserviceable conductor from the site complete all as specified and as directed by Engineer-in-charge.

Dismantling of LT insulators of any type and size from position and removing unserviceable insulators from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of cross arms fixed on Steel tubular poles carefully including separating and getting aside, serviceable cross arms for re-use in the work and removing unserviceable cross arms from site complete all as specified directed by Engineer-in-charge.

Supply, laying & testing of 400 Sqmm, 3.5 Core XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100Volt grade laying in trenches with fixing acessories complete all as specified and as directed by Engineer-in-charge. Note - Earthwork, sand cushioning, bricks, GI pipe, etc. shall be measured and paid separately.

All as per serial item no. 4 above but for size of cable 150 sqmm 3.5 core.

All as per serial item no. 4 above but for size of cable 120 sqmm 3.5 core.

All as per serial item no. 4 above but for size of cable 95 sqmm 3.5 core.

All as per serial item no. 4 above but for size of cable 25 sqmm 3.5 core.

All as per serial item no. 4 above but for size of cable 16 sqmm 4 core.

All as per serial item no. 4 above but for size of cable 16 sqmm 2 core.

All as per serial item no. 4 above but for size of cable 10 sqmm 2 core.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge.

Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.

M&L for sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed by Engineer-in-charge.

Supply & Laying Sub-Class B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and as directed by Engineer-in-charge.

Material and labour for cutting of bituminous road to 90cm in depth and 60cm in width for laying of GI pipes and making good of cutting area with earth filling, 450mm thick sand filling and finaly on top level of the raod filling with 250mm thick PCC 1:2:4 type B1(20mm graded stone aggregate) complete all as specified and as directed by Engineer-in-charge.

Supply, installation, testing and commissioning of CPRI approved LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 200 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers to accomodate the following items including supply and fix of following items :- (a) MCCB 100 Amps 4 pole 16 KA - adjustable type with extended terminal(incoming ) -01 Nos (b) MCCB 40 Amps 4 pole 16 KA - adjustable type with extended terminal (out going)-06 Nos (c) Multifunctional meter (KWH, Voltage,Ampere and frequency)-01 set (d) RYB indicator lamp-01 set

Supply, installation, testing and commissioning of CPRI approved LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 200 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers to accomodate the following items including supply and fixing of following items :- (a) MCCB 125 Amps 4 pole 16 KA - adjustable type with extended terminal(incoming & ourgoing ) -01 Nos (b) MCCB 40 Amps 4 pole 16 KA - adjustable type with extended terminal (out going)-08 Nos (c) Multifunctional meter (KWH, Voltage,Ampere and frequency)-01 set (d) RYB indicator lamp-01 set

Supply, installation, testing and commissioning of CPRI approved LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 200 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers to accomodate the following items including supply and fixing of following items :- (a) MCCB 200 Amps 4 pole 16 KA - adjustable type with extended terminal(incoming ) - 01 Nos (b) MCCB 40 Amps 4 pole 16 KA - adjustable type with extended terminal (out going) - 03 Nos (c) Multifunctional meter (KWH, Voltage,Ampere and frequency) - 01 set (d) RYB indicator lamp - 01 set

Supply, installation, testing and commissioning of CPRI approved LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 200 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers to accomodate the following items including supply and fixing of following items :- (a) MCCB 63 Amps 4 pole 16 KA - adjustable type with extended terminal(incoming ) -01 Nos (b) MCCB 40 Amps 4 pole 16 KA - adjustable type with extended terminal (out going)-11 Nos (c) Multifunctional meter (KWH, Voltage,Ampere and frequency)-01 set (d) RYB indicator lamp-01 set

Supply, installation, testing and commissioning of CPRI approved LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 200 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers to accomodate the following items including supply and fixing of following items :- (a) MCCB 400 Amps 4 pole 16 KA - adjustable type with extended terminal(incoming ) -01 Nos (b) MCCB 40 Amps 4 pole 16 KA - adjustable type with extended terminal (out going)-12 Nos (c) Multifunctional meter (KWH, Voltage,Ampere and frequency)-01 set (d) RYB indicator lamp-01 set

Supply & laying GI pipe 100 mm bore light grade for protection of UG cable, complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe 50 mm bore light grade for protection of UG cable, complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe 40 mm bore light grade for protection of UG cable, complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe 25 mm bore light grade for protection of UG cable, complete all as specified and as directed by Engineer-in-charge.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth strip of size 32 x 6 mm by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (medium grade) and chamber shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs), complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth strip. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S JIWA SINGH S GILL

Jitu Enterprise

M/s Nice Traders