SPECIAL REPAIRS TO BLDG NO T-18 AT FORT AREA AND HOSP-1, SINGLE OFFRS ACCN IN STN OFFRSMESS COMPLEX UNDER GE KAMPTEE.

Amount

Dismantling asbestos cement sheet (corrugated, semi-corrugated etc) in roof coverings complete all as specified and directed.

Dismantling mild steel work of any description, not otherwise provided for complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

Dismantling timber scantlings in frame work 40 sqcm and over in section, in any position complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame) area exc 1.5 sqm but not exc 4.00 Sqm complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but not exc. 2.00 Sqm complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed.

Dismentling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolation of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in subbase complete all as specified and directed.

M&L for single filling in floors or pavings, laid in layers not exc. 15cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) complete all as specified and directed.

M&L for 2nd class hard wood in scantling clean sawn and unframed timber complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cresoat oil complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for brick with fly ash brick old size, straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work using water proofing compound as per manufacturer's instructions complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing admixture of Make:-Pidilite or equivalent complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6, surface finished fair and even complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, water tubing or concealed conduit wiring, etc. and making good, cutting exc 20cm girth complete all as specified and directed.

S&F in repair GI tubing 15mm bore, medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F in repair GI tubing 20mm bore, medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

M&L for TMT bars of 10mm dia and over, cut to length, bent to shape as required and binding with mild steel wire (annealed) not less than 0.90 mm etc complete all as specified and directed.

M&L for TMT bars of 8 to 10mm dia and over cut to length, bent to shape as required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-I (using 20mm graded stone aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbs and the likes including weathering, slightly rounded or chamfered angles and throating including waste formwork complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles over 15mm cement screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tile including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for joint free colored non skid ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exc 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles over 15mm cement screed bed in cement mortar 1:4 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, & fixing in opening complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick (Style) consiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Top rail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame, wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned and chemically pressure freated of any number of panel complete all as specified and directed.

S&F 30mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, elc.;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and directed.

M&L for 9mm thick plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.

M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber framework or similar complete all as specified and directed.

M&L for melamine polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed.

S&F 2nd class hardwood fillet of sectional area not exc 3 sqcm bullnosed, splayed, chamfered, rounded on one edge or face, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S&F 150mm extruded brass handles, fabricated type, polished complete all as specified and directed.

S&F 300mm brass, sliding door bolt with sand die-cast brass hasp, staple and fixing bolt with rolled drawn brass bolls and fixed complete all as specified and directed.

S&F 250 mm brass, sliding door bolt with sand die-cast brass hasp, staple and fixing bolt with rolled drawn brass bolls and fixed complete all as specified and directed.

S&F 150mm brass body and tongue with hard drawn steel spring floor door stopper fixed complete all as specified and directed.

S&F 200mm long brass barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long butt hinges, cast brass, with mild steel hinge pin, bright polished and type B-11 complete all as specified and directed.

S&F aluminium (powder coated) door, window, ventilator shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed.

S&F 5.5mm thick tinted glass fixed with necessary rubber gasket and aluminum beading complete all as specified and directed.

M&L for prelaminated particle board 12mm thick, interior grade, laminated one side with decorate choice lamination and other side balancing white lamination, fixed with screw to timber frame work in wall complete all as specified and directed.

S&F aluminium (powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue & specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples. (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint (Make of Aluminium Sections powder coated:- Jindal or equivalent.)

S&F 100mm size mild steel medium weight cold rolled butt hinges complete all as specified and directed.

S&F 75mm size mild steel medium weight cold rolled butt hinges complete all as specified and directed.

S&F 250mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F aluminiumm alloy, anodised sliding door bolt 300mm with hasp, staple (bolt type) and fixed clip of sheet cast or extruded section and fixing bolt and sliding bolt of extructed section or cast -aluminium alloy and fixed complete all as specified and directed.

S&F for 150mm long aluminum tower bolt 150mm anodized complete all as specified and directed.

S&F for 150mm long aluminum handles, cast type, anodized complete all as specified and directed.

S&F anodized aluminium (powder coated) frame for doors, window, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.30mm thick of size 24x24 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.30 mm thick with height 38 mm and cross Tee 0.3 mm thick with height 28 mm suspended from soffit at approx 1200 mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling boards shall be measured separately. (ii) The grid system shall be as per specifications of make as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595x595x6mm fixed or laid/ inserted to GI frame work with screws/clips as in ceiling, laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

S&F framed work such as grills, guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for pre- polished granite (of any type) work (table rubbed and polished) in steps, jams, pillars; cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite including necessary notching, chamfering the edges complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F in repairs bowl for coupled WC with UF soft close seat cover, hinges, fixing accessories set and accessories set, size 365X630X750mm, P Trap-180mm (Jaquar Cat No FNS-WHT-40751S) and cistern with cistern fittings for 40751P&S (Jaquar Cat No - FNS-WHT-40201) Make:- Jaquar or equivalent complete all a specified and directed.

S&F in repairs vitrious china wash basin, size 500 x 420 x 190mm, table top type fixed in granite or table complete all as specified and directed. Make:- Jaquar (Cat No-FNS-WHT-40931) or equivalent.

S&F in repairs single lever tall boy with 155mm extension body fixed sprout without popup waste system with 600mm long braided hoses complete all as specified and directed. Make:- Jaquar (Kubix Prime Cat No:KUP-35005BPM) or equivalent.

S&F in repairs 2 way bib cock with wall fange complete all as specified and directed. Make:- Jaquar (Kubix Prime Cat No:KUP-35041PM) or equivalent.

S&F in repair Overhead shower 150X150mm squarel pipeshape single flow (ABS body chrome plated with gray face plate) with Rubit cleaning system complete all as specified and directed. Make: Jaquar (Cat No- OHS-35495) or equivalent.

S&F hand shower (health Faucet) with 1 Meter long easy flex tube in chrome finish & wall hook complete all as specified and directed. Make : Jaquar (Cat No ALD-565) or equivalent.

S&F in repairs single lever wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and directed. Make: Jaquar (Kubix Prime Cat No:KUP-35117PM) or equivalent.

S&F towel ring, square, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Jaquar (AKP-35721P) or equivalent.

S&F single towel rail 600mm long, stainless steel, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Jaquar (AKP-35711PS) or equivalent.

S&F corner glass shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Jaquar (ACN-1173) or equivalent.

S&F soap dish holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Jaquar (AKP-35731P) or equivalent.

S&F toilet paper roll holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Jaquar (AKR-35751P) or equivalent.

S&F waste coupling 32mm size half thread with 80mm height brass CP with long screwed shank and fly nut, flanged end complete all as specified and directed. Make: Jaquar (ALD-709) or equivalent.

M&L for 40mm dia low density poly ethylene pipes (LDPE) of pressure rating 6 kg/cm laid in trenches complete all as specified and directed.

S&F 40mm dia waste fittings, brass, chromium plated for glazedware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs plastic water closet seat, black/ white closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white, with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white, including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F 32mm waste fittings, brass, chromium plated for glazedw are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 32mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed omplete all as specified and directed.

S&F in repairs 15mm bore chromium plated bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, brass CP, fancy type complete all as specified and directed.

S&F in repairs 15mm dia brass C.P fancy type stop valves complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F hand shower (health Faucet) with 1 Meter long easy flex tube in chrome finish & wall hook complete all as specified and directed. Make: Jaquar (Cat No ALD-565) or equivalent.

S&F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 125mm size brass chromium plated shower rose complete all as specified and directed.

S&F grating dome 100mm dia of PTMT (Min weight 25 gms) complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed in floor/wall complete all as specified and directed.

S&F cast iron floor trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specifed and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

M&L for concrete bed to drain pipes for 150mm dia pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified and directed.

M&L for salt glazed stoneware drain pipe 150mm dia laid in trenches and jointed complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

S&F 3mm thick figured glass pin headed type not exc 0.50 sqm each pane and fixed with oil putty or as required etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old/new steel surafces of any description over 10cm width or girth & applying one coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of birla white wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on wall and preparation of surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint as primer complete all as specified and directed.

S&F curtain rod, fancy type, wooden pattern with wooden type bracket on both side to fit both rod and mounting hardware, modular type complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point, fan & socket, light and power complete including light fittings any type, switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc and makinggood to the disturbed surfaces of walls / floor etc to match with existing surfaces including white washing / colour washing / distemper to match with existing wall / floor / ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure, MCB, DB, main switch etc and making good to disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/capacity and making good to disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking medium grade concealed in wall / ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of size 1.50 sqmm pressed steel terminal modular boxes sunk on wall for mounting of switches switch sockets fan regulator etc including modular white cover plate suitable for mounting modular switches, sockets, fan regulator etc complete all as specified and making good to distrubed surfaces for one light point controlled by one, one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 131 above but one ceiling /exhaust/ wall mounted fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 131 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 131 above but one 3 pin 5 amp socket out point on independent board complete all as specified and directed.

All as per item No 131 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 131 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with 1100 volt grade two single core FRLSH PVC insulated unsheathed stranded copper conductor cable 2x6 sqmm with and inculding 1x6 sqmm copper conductor earth continuity wire drawing in, concealed in wall and including electrical grade non metallic rigid PVC conduit not less than 20mm dia, medium grade conealed in wall / ceiling as per site rquirement complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, tee, elbow shall be of same make.

All as per item No 137 above but 2x4.0 sqmm with and including 1x4.0 sqmm copper conductor complete all as specified and directed.

S&F switch, modular type, single pole, one way, 6 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F switch, modular type, single pole, one way, 16 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F socket, modular type, single pole, one way, 6/16 amp, 2/3 pin, 3 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F socket, modular type, single pole, one way, 6 amp, 3 pin combined, 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F modular type bell push 6 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F modular fan step regulator, 120 watt, 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F bell ding dong, 230V, AC single phase complete all as specified and directed.

S&F highly efficient direct-indirect recessed LED ceiling tile, high transmittance, micro linear frosted (MLF), PMMA curved diffuser provides glare free light suitable for 600mm x 600mm modular ceiling LED fitting, 36 watt, rated voltage 240V, 50Hz complete with 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat part No LCTLRF7-36-CDL / Bajaj cat part No Skylux BZRSQL 36W WH/ Philips cat part No Ultraslim Plus 15.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat part No LCTLN-20-CDL / Bajaj cat part No BLTRU 20W NW VIVA / Philips cat part No BN150W LED20S-6500 PSE OD GR.

S&F highly durable surface mounted 9/10 watts LED batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat part No LCTLN-10-CDL / Bajaj cat part No BCLSB 10WH / Surya Cat No SLW BT 10W / Philips cat part No BN 021 LED10S-6500 PSU GR S1.

S&F LED light fitting surface mounted bulk head luminaries 8-10W with minimum 800 lumen, IP 65, auminium housing, surge protection including drivers etc complete with all accessories and including connecting up with twin core twisted flexible cable of suitable size of 230V, 50 Hz complete all as specified and directed. Make:- Philips Cat part No Endura LED 10W, Luker Cat Part No LBKOVSL04, CG Cat part No LBHE-10-CDL, Surya Cat part No SLE BLH 10W.

S&F building security light LED 25-30W with lumen output 2000 with driver with rated voltage 240V, 50Hz including mounting GI, made out of 25mm dia light grade pipe 0.8m bent to shape including FI clamps, nut bolts etc complete all as specified and directed. Make:- Philips Cat part No BRP046 LED 30CW MR S1 PSU GR, Surya Cat part No Lexon SLE UL 25W IP65, CG Cat part No LSTS-25-CDL.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB single pole and neutral 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt, 40 to 63 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F ceiling fan, single phase, 1200mm sweep, 230V, 50Hz, with clamp set complete all as specified and as directed.

S&F exhaust fan, single phase, 250/300mm sweep, 230V, 50Hz, PVC body with bolts, nuts, washers and connected electrically complete all as specified and as directed.

M&L for earthing complete with galvanised steet earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminium lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe upto 7.50 metre long for protection of earthing lead. (f) Reguisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.86,288.50]

M/s DS Khekde

SHUB CONSTRUTION

khushal constructions

DEESHA CONSTRUCTIONS

M/s B S Jain

M/s M.G. Hargunani

Bidder Name

SHUB CONSTRUTION

DEESHA CONSTRUCTIONS

khushal constructions

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

M/s M.G. Hargunani