Furnishing and Interior Decoration of Meeting cum Seminar Room at RKVY Building

Furnishing and Interior Decoration of Meeting cum Seminar Room at RKVY Building

Acoustical False Ceiling: Supply & fixing suspended ceiling which includes G. I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending G. I. intermediate channels of size of size 45mm (0.9mm thick with two flanges of 15mm each) from the truss / RCC roof at 1220mm centres with M.S. hanger as per requirement with G.I cleat etc. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres. All the framing G.I materials of ultra section made of Saint Gobain.50mm thick x 500 GSM poly wool will be laid on the suspended Grid structure of the ceiling. Screw fixing will be done mechanically either with screw driver or drilling machine with suitable attachment.Finally the Gyptone Sixto 63 (Size: 2400mmx1200mm) 12.5mm thick all four side tapered perforated Gypsum Acoustical board having eight quadrants having 12 mm Hexagonal shaped perforations and backed by an acoustical fleece. It has 15% perforation area with 6mm hexagonal radius and it gives 0.8 NRC with 500 GSM poly wool backing. Also it has Class 1 as per BS 476 for reaction to fire. The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered edges of the boards with jointing compound, joint paper tape and complete with aesthetically matched painting (Excluding the price of acrylic emulsion paint over a coat of primer). Entire work to be done as per drawing, specification and direction of E.I.C

Acoustical Wall Panelling: 50mm thick Metal Stud wall panelling which includes 48mm studs (0.55 thick having one flange of 34mm and another flange of 36mm made of G.I steel) placed at 300mm centre to centre. in 50mm floor and ceiling channels (0.55mm thick having equal flanges of 32mm made of G.I.steel).Providing & fixing 50mm thick x 500 GSM poly wool in roll form will be laid within the Grid structure and wall clading and 12.5mm thick following Gypboard will then be screw fixed to the channels with 25mm drywall screws at 230mm centres. Screw fixing will be done mechanically either with screwdriver or drilling machine with suitable attachment.Finally the 12.5 mm thick plain/parforated gyp boards are to be jointed and finished so as to have a flush look which includes filling and finishing the square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard (as per recommended practices of India Gypsum). complete with aesthetically matched painting (Excluding Two coats of acrylic emulsion over a coat of primer) Entire work to be done as per drawing, specification and direction of E.I.C. Providing and Fixing 50mm thick Metal Stud wall panelling which includes 48mm studs (0.55 thick having one flange of 34mm and another flange of 36mm made of G.I steel) placed at 300mm centre to centre. in 50mm floor and ceiling channels (0.55mm thick having equal flanges of 32mm made of G.I.steel) & 50mm thick 500 GSM absorb wool tested as per Fire Retardant in roll form will be laid within the Grid structure backed between studs structure and wall clading Gyptone Sixto 63 (Size: 2400mmx1200mm) 12.5mm thick all four side tapered perforated Gypsum Acoustical board having eight quadrants having 12 mm Hexagonal shaped perforations and backed by an acoustical fleece.It has 15% perforation area with 6mm hexagonal radius and it gives 0.8 NRC with 50mm glass wool backing .Also it has Class 1 as per BS 476 for reaction to fire. The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered edges of the boards with jointing compound, joint paper tape and complete with aesthetically matched painting(Excluding the price of acrylic emulsion paint over a coat of primer). Entire work to be done as per drawing, specification and direction of E.I.C

Dado Work: Supplying and providing laminated finished wooden dado work within the classroom all four walls with a height of 1200mm approximately from the floor level by a frame work made of 50mm thick Metal Stud section as per requirement. The frame work to be covered by 9mm thick ply (BWR grade) with nails & adhesive and 1 mm laminate to be pasted on 9mm ply with adhesive. The top edge of the dado level of the dado to be covered with moulded teak wood bit of size 19mm x 12mm (Angular bit) and the bottom level of the dado to be covered with 100mmW x 12mm thick wooden skirting to be fixed on top of laminate with adhesive. Entire work to be done as per drawing, specification and direction of E.I.C.

Glass Panelling: Providing and fixing of glass panelling with 8mm thick frosted glass on 12mm thick plywood, all complete.

Roller Blinds: Providing and fixing of roller blind with screen fabric, all complete.

Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s) in suitable size PVC casing-capping (Pesto/ Precision)/rigid PVC pipe incl. necy. fittings etc. to light/fan point with Modular type switch (Crabtree) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish (for Implement shed). Av. Run- 8 mtr. a) 36 watt LED light - 8 and b) Spot light - 4nos.

S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, Polycab) of the following sizes in 25 mm. PVC casing capping incl. all fittings and making necy. connection as required. a). 3x 1.5 sq.mm. for sub main line.

S and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex, Havell’s, Polycab) of the following sizes in 25 mm. PVC casing capping incl. all fittings and making necy. connection as required. b). 2x2.5 + 1x1.5 for power plug pts

Supply & fixing of 2 nos. 240 volt, 6 amp. Modular plug socket with 2 nos, 6 A modular switch & 1 no. 240 volt, 16 amp. Modular plug socket with switch in a single modular PVC switch board (Crabtree, Legrand, Schneider) with top cover plate on wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Havells/ LegrandBrand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Make- Havells/ Legrand) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

supply of 240 Volt, 36 watt LED square type panel light fittings , Cat no- Philips - RC 380B LED 36 S 6500 G-6 L60W PSU OD.

Supply of 240 Volt, 6 watt LED round type panel light fittings , Cat no- Philips -DN 295B LED6S 6500 PSU WH

Supply , fitting and testing of 240 Volt, pedestal fan. Make - Crompton . Model- WM cressida. Or equivalent Havell's. ** Fan model and colour will be provided by Engineering dept, UBKV.

Supply and placement of 14-Seater Mingle Unitized AV Conference Table as per design approve as per order shall have an overall size of 4200mm(W) x 1500mm(D) x 740mm(H). Work top shall made up of 25mm thick MDF one side pre-laminated board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. The Under-structure shall consist of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction.

Supply and placement of AV Storage as per design approve as per order shall have an overall size of 1745mm(W) x 670mm(D) x 742mm(D). Carcass shall made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 0.8 mm thick PVC lipping. Pilot holes shall be provided for fixing 12U AV equipment rack. 1 Nos 12U rack fits into one unit of 112 storage. 3 Nos 12U racks fit into one unit of 312 storage. Glass shall be 5mm thick toughened, grey tinted glass with crystal edge polish finish is used as shutter, shall be fitted with self-closing hinges with soft close dampner for smooth operation. Back Vent Panel shall made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for ventilation. Castors (5nos.) shall be provided at the bottom to enable mobility of the unit.

Supply and placement of Mid Back Chair as per design approve as per order shall have an overall size 76.3cm (Width) x 76.3cm (Depth) x 85.5-97.5cm (Height) x 42.5-54.5cm (Seat Height). The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Back Size shall be 47.5 cm. (W) x 58.0 cm (H). The High Resilience (HR) Polyurethane Foam should be moulded with density 45±2 kg/m3 and hardness load 16±2 kgf for 25% compression. The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. The Centre Tilt Synchro mechanism should be designed with the following features like 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12.0±0.3cm. The bellow assembly should be 3-piece telescopic type and injection moulded in black Polypropylene. The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors should be injection moulded in Black Nylon.

AMINUR HOSSAIN

MS HOSSEN ELECTRICALS

R R ENTERPRISE