MAINT AND MISC CIVIL REPAIR WORK TO CERTAIN MD AND OTM ACCN AT N AREA AND HALLOMAJRA UNDER GE CHANDIGARH

Amount

Taking down chowkhats with shutters (without taking off shutter from frame) not exc 1.50 sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:4) or PCC (1:2:4) complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but exc 4 sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:4) or PCC (1:2:4) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removal complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each and removal complete all as specified and as directed.

Taking down shutters of any description and refixing in same opening exc 1 sqm but not exc 2 sqm each and removal complete all as specified and as directed.

M&L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including back filling PCC and one shop coat of red oxide primer complete all as specified and as directed.

M&L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including back filling PCC and one shop coat of red oxide primer complete all as specified and as directed.

S&F 35 mm 2nd class hardwood Plain, framed, panelled shutters (two number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick glazed and Skelton shutter of IInd class hard wood open rebated and prepared to receive glass, gauge etc (with out shash bars) divided into square plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I section 8-24(a) and fitted to chowkhat complete all as specified.

S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with one faces are covered with decorative face veneer with lipping/frame to match, all as specified & directed by Engr-in-Charge.

S&F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F for factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified. Fe 290 (Gde E-165) complete all as specified and as directed.

S&F as in repair framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/zinc chrome primer, including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/ zinc chrome primer, including cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F steel ventilator including hinges, steel peg towerbolt complete all as specifed and directed.

S&F 150mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.

S&F 125mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.

S&F 200 mm long aluminium anodised extruded section tower bolts fixed to shutter complete all as specified and as directed.

S &F 150 mm long aluminium anodised extruded section tower bolts fixed to shutter complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and as directed.

S&F M.S.helical spring 300mm longe including roller & roller plate complete all as specified and directed.

S&F in Hasp and staple 125 mm alluminum anodised complete all as specified and direccted.

S&F 18/19 mm thick HDHMR one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets,cupboards and other accesories etc as in repairs complete all as specified and as directed.

M&L for preparation of new wooden surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over and including a coat of pink primer complete all as specified and as directed.

M&L for Preparation of new steel surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over and including a coat of shop coat primer complete all as specified and as directed.

M&L Preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm fixed to door complete all as specified and as directed.

M&L for floor door stopper of aluminium alloy body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring ,fixed in floor complete all as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

M&L for Aluminum body peg set of 06 pegs as in repair complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire stapples all as specified.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire stapples all as specified.

Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.

M &L for brick work with sub class ‘B’ bricks as per IS-1077-1992 (minimum compressive strength old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

M &L for (except bricks) brick work with sub class ‘B’ bricks as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

M&L for Brickwork with sub class 'B' bricks,straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 complete all as specified..

Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick internal wall surface cement plaster with cement sand mortar (1:6) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster on brick work or concrete surfaces including roof projections and chajjas as in ceiling surface in cement mortar (1:3) on ceiling finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 15mm thick cement plaster on external wall surface on brick work or concrete on wall of buliding at upto 10 mtr height in cement mortar (1:4) on wall finished all as specified and directed.

M&L for preparation of new plaster surface on wall and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of new plaster surface of ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of new plaster surface on wall and applying Two coat of oil bound distemper over a coat of chalk whiting on newly plastered surfaces of walls complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and finishing with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified.

M&L for complete removal of exixting treatment of walls including preparation of the surfaces properly and applying two coats of oil bound distemper over 1 mm thick plaster of paris putty to achieve smooth surfaces, complete all as specified and as directed.

Removal of existing treatment and applying two coats of weather coat (Apex) over two primer coats of dump shealth to old plastered walls as per manufacturer instruction including properly fillings the cracks with putty and applied by approved applicator complete all asspecified and directed

M&L for complete removal of existing treatment of walls including preparation of the surfaces properly and applying one coat of cement based over primer paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Material & labour for 25mm thick PCC (1:2:4) type BO (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished even & rough finish complete all as specified & directed.

M&L for door closer hydraulically regulated, designation No. 1 universal type, aluminium body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

M&L for floor door spring hydraulically regulated, cast iron body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed

M&L for complete removal of existing surface and applying two coat of oil bound distemper over a coat of primer on wall surfaces including 1mm thick on wall/ceiling surfaces prepared by wallcare putty including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old decorated plastered of walls surfaces by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onescomplete all as specified and directed by Engr-In-Charge.

S&F 4 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 sqm in each pane glazed with oil putty or fixed with beads etc as in repair. complete all as speciifed and directed.

S&F 4mm thick Figured glass pin head type, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm fixed to wdn frame in each pane, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cementmortar bedding (but notbacking), removing rubbish off the premises including removing rubbish material at site complete all as specified and as directed.

Roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. complete all as specified and as directed.

M&L for non skid Ceramic tiles 7 to 8 mm thick coloured area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with surfaces of tiles over 15mm thick bedding of layer of cement sand mortar (1:6) complete all as specified and as directed.

M&L for non skid Ceramic tiles 7 to 8 mm thick coloured area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with surfaces of tiles over 15mm thick bedding of layer of cement sand mortar (1:6) complete all as specified and as directed.

M&L for coloured vitrified tiles 8 mm to 9 mm thick (square rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 Sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured /printed tiles of size 450mmx 300mmx7mm thick as in skirting/dado setting & jointed with neat cement slurry over & including 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar.

M&L for 18-20mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4) & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

M&L for 20-25 mm thick Machine cut kota stone slab flooring size 55cmX55cm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for 20-25 mm thick Machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4. cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing including complete all as specified.

Taking down to 15mm bore steel tubing and connections removal from site complete all as specfied and as directed.

Taking down to 20mm bore steel tubing and connections removal from site complete all as specfied and as directed.

S&F for 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl elbow, socket, reducers etc., and making good as existing surface complete all as specified and directed.

S&F for 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl elbow, socket, reducers etc., and making good as existing surface complete all as specified and directed.

S&F 16 mm CPVC SDR -11 brass elbow complete all as specified and directed

S&F 16 mm CPVC SDR -11 brass Tee complete all as specified and directed

S&F 16 mm CPVC SDR -11 union complete all as specified and directed

S&F 15mm CPVC SDR -11 Tank Adaptor nipple complete all as specified and directed

S&F 15 mm CPVC SDR -11 Ball Valve complete all as specified and directed

S&F 15 mm CPVC SDR -11 Female Brass Threaded Adaptor (FTA/ FBTA complete all as specified and directed

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

Dismantling of walls and ceiling boards/wall paneling or insulation board any thickness, including cover fillets complete all as specified and directed

S&F PVC hollow wall panelling of 5 mm including all necessary fitting frame work etc completed all as specified by Engr-in - Charge.

M&L in repair formineral fiber ceiling tile 16mm thick with grid system interlocking UNI T15 Pro T- Grid of hot dipped all round galvanized iron section of 0.33mm thick (glavanize @ 120 gsm) comprising of main T runners of 15X32 mm of length 30000mm, cross T of size 15X32mm of length 1200mm and secondary intermediate cross T of size 15 X 32 mm of length 600mm to form grid module of size 600X600mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000mm length and L- shap level adjuster of size 85X25X2mm, spaced at 1200mm center to center along main 'T'. The system shoud rest on periphery walls/ partitions with the help of perimeter wall angle of size 24X24X3000mm made of 0.4mm thick sheet to be fixed to the wall with help of plastic rawl plug at 450mm center to center & 40mm long dry wall S.S. Screw. Then 16mm thick lmpression or equivalent mineral fiber ceiling panel having FLB edge of size 595X595mm shall be placed into the above grid of size 600X600mm. This ceiling panel confirms to ASRM E84 surface burning characteristics (Class A, flams spread 25 & smoke developed 50). The ceiling panel provides NRC 06, CAC minimum 33, minimum light reflectance 84%, minimum recycled content-45%, reaction to fire class 0/class 1 as per BS 476 Pt-6 &7 & can withstand relative humidity up to RH 99% (limiting conditions- Max 49*C/99% RH). Containts a broad-spectrum antimicrobial additive on the face and back of the panel the provideds resistance approved .

S & F vitreous china wash down water closet (pedestal pattern) white with ‘ and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.

S&F vitreous china squatting pan Orissa pattern 580x440mm size mm white with integral foot rest (excluding flushing cistern and flush pipe) complete incl provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphoage pipe etc fixed as in repair complete all as specified and as directed.

S&F for vitreous china white wash basin with flat back of size 550mmx400mm coloured including MS brackets, cutting for and pinning in ends of brackets, including bottle trap/ PVC waste pipe as in repairs complete all as specified and as directed.

S&F single piece WC of size 365x655x765 with flushing cistern and connection pipe, P or S trap (closed pattern incl all necessary accessories like rag bolts, kitt /gel gasket etc, (including flushing cistern, pvc seat cover , jet and flush pipe complete all as specifed and directed.

S&F for centre hole basin mixer with spout, fancy type, chromium plated Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedas in repair complete all as specified and as directed.

S&F for one pice PVC hydrolica plastic water closet seat cover (white coloured) closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinges device for pedestal pan fixed as in repair complete all as specified and as directed.

S&F spray jet chromium plated including suitable lengthof PVC connection pipe , fixed in repair complete all as specified and as directed.

S&F health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.and as directed.

S&F in repair door ceal 120cm long complete all as specified and directed.

S&F 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore iron pipe as in repair complete all as specified and as directed.

S&F for 15mm bore bib taps, cast copper alloy with CP long body, fancy type, screwed down, screwed for iron pipes or for brass ferrule and fixed in repair complete all as specified and as directed.

S&F for angle valve chromium plated, with crutch or butter fly handle screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.

S&F for concealed stop valve cast copper alloy fancy type chromium plated with long shank and cup screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.

S&F in repair Waste coupling of CP, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) , complete all as specified.

S&F Brass chromium plated shower rose 150mm square in shape with 450 mm long arm fixed in repair complete all as specified and as directed.

S&F Bib tap standard of PTMT with flange Minimum weight 15mm-5gms any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms fixed in repair incl PTMT extension Nipple (Minimum weight 15mm-18 gms) fixed in repair complete all as specified.

S&F glass shelf assembly 5.5mm thick, 12 cm wide and 600 mm long fixed with & including chromium plated fixed in repair complete all as specified and as directed.

S&F in repairs plain PVC waste pipe 32 mm bore complete all as specified.

S&F in repair glass corner shelf, one set comprises of three pieces of corner shelf fancy type (small to large) 250 x 250mm, 200 x 200mm, 150 x 150mm) with all fittings,complete all as specified.

S&F for Soap dish, vitreous China white, approximate size 160x 160x90mm fixed in repair complete all as specified and as directed.

S&F for PVC connections with PTMT nuts of length 600 mm long fixed to 15 mm bore iron pipe or union as in repair complete all as specified and as directed.

Disconnecting existing tanks exc 250 ltr and n exc 500 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.

S&F for tank Nipple suitable for HDPE water tank 20mm tank nipple cast iron min weight 45gms complete all as specified.

S&F for tank Nipple suitable for HDPE water tank 15mm tank nipple cast iron min weight 45gms complete all as specified.

S&F 10 litre capacity PVC Valveless syphonic actiontype flushing cistern low level white with inlet ball valve float and handle incl bracket as fixed in repair complete all as specified and as directed.

S&F kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes couplig ;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.

S&F for CP soap dish in repair of complete all as specified and as directed.

S&F for CP toilet paper holder in repair of complete all as specified and as directed.

Dismantling of cast iron pipe/ PVC drain pipes/PVC (SWR) pipe etc, 110/75mm, jointed in cement mortar and taking out of trenches and wall, if required complete all as specified and directed.

S&F in repairs steel grating 100mm dia complete all as specified and directed.

S&F for 110mm dia PVC rain water pipe pressure rating ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F for 110mm dia PVC rain water pipe pressure rating ISI Marked laid in trenches or in floors/wall complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

S&F for floor frap 75 mm PVC as in repair, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes ISI Mark bends any radius complete all as specified and directed

S&F 75 mm PVC (SWR) pipes ISI Mark bends any radius complete all as specified and directed

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F 150 mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed complete all as specified and directed.

Dismantling water tanks of capacity exc. 1000 but n. exc. 2000 litres complete all as specified and directed.

Dismantling water tanks of capacity exc. 500 but n. exc. 1000 litres complete all as specified and directed.

Dismantling water tanks of capacity exc 250 ltr and not exc. 500 litres complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 500 litre capacity (cylindrical vertical with closed top tripal layer) hoisted and fixed in position including nipple all as specified in SSR Part I.

S&F rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top tripal layer) hoisted and fixed in position including nipple all as specified in SSR Part I.

S&F rotational moulded polyethylene water storage tanks of 2000 litre capacity (cylindrical vertical with closed top five layer) hoisted and fixed in position including nipple and dismantling existing water tank complete all as specified in SSR Part I.

M&L ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 mm - 2 1 0 gms / 25mm-455gms/ 40mm - 690 gms) fixed to 20 mm bore complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in floor finishes/ plinth protection finished even and smoot complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base/Path complete all as specified and directed.

S&F Factory made prepolished vibro compacted chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking colour paver block 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 80mm thickness, with grey cement & pigment M-40 grade complete all as specified and as directed.

M&L plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate, as for back filling the chowkats, as in coping, bed plates including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge.

M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) in blocks for fixing hold fasts & pressed steel frames for doors including necessary form work complete all as specified and directed.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers ,knobs etc. as approved by GE complete all as specified.

Dismantling of mild steel work of any description and in any position all as specified and directed.

Demolition of RCC of any description including facilitate in cutting of reinforcement and removing the rubbish off the premises of cantonment complete all as specified and directed.

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

Dismantling Plain or corrugated AC cement sheet/CGI sheet etc any gauge, thickness, complete all as specified and directed.

Dismantling Plain or corrugated fiber sheet etc any gauge, thickness, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating profile sheet GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Pre- painted galvalume aluminum zinc coating profile sheet GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping s crews as complete all as specified and directed.

M&L 2mm thick Fibre glass reinforced transparent plain/corrugated sheeting of white or any colour fixed with coach screw and washer in roof, wall etc complete all as specified.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, window grills, channels, plates, cap etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including all asseary complete all as specified including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified.

M&L for toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including ss hinge, ss handle 2 Nos floor door spring fixing all ccessories, cutting to shape, drilling holes required and ruber, cleting, silicone,glazing with oil putty etc complete including necessary embossing as desied by accepting officer & all as specified and directed by Engr-in- Charge.

S&F 4.8 mm thick sheet glass pane tinted/plain/Figured glass type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.

S&F aluminium powder coated (min thickness of powder coating 50 micron) frame for door , windows, ventilators with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.

S&F aluminium window jali for windows, ventilators with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene packing, handles, tower bolt in each door, hinges, anodised aluminum snap beading screws etc. as required complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars,including (double shutter) glazing bars and without glazing bars aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long hinges type B-21 100mm long suitable handle, tower bolt as required complete all as specified and directed by Engr-in-charge.

M/s REEDIT CONSTRUCTION (BID ID -3120629)

M/S MATLOOB AHMED (BID ID -3124015)