GHErode_2025

For Super structure in Ground Floor

For Super structure in First Floor

For Super structure in Second Floor

For Foundation & Basement

For Super structure in Ground Floor

For Super structure in First Floor

For Super structure in Second Floor

For Foundation & Basement

For Super structure in Ground Floor

For Super structure in First Floor

For Super structure in Second Floor

For Foundation & Basement

For Super structure in Ground Floor

For Super structure in First Floor

For Super structure in Second Floor

Supplying and fixing in postion of 35mm thick solid core flush door shutters double leaf with TW ply on both sides and with TW lipping of size 30x12mm on all edges with necessary adhesives and C.P. Screws. Alu. Butt Hinges (6 nos. 250 x 16 mm Size), Alu. Aldrop 1 No. 250 x 16 mm Size, Alu. Tower Bolt 2 No. 250 x12 mm size, alu. Tower Bolt, 1 No. 200 x 12 mm size, D type alu. Handle 2 Nos, 2 Nos. of 200mm length alu. door stopper with rubber bush shall be provided, as directed by the departmental officers etc., complete.

Single leaves

Manufacturing, supply and fixing of Steel doors with single leaves with following specification, MS angles of size 40x40x6mm at 3.5 kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60 kg/m for the shutter frames. Stiffners with 32 x6mm at 1.50Kg/m. MS flat is provided as the lo cak rail of the door4 and welded infact of both ends to the shutter frame, 18 gauge CR sheets of best quality is laid as panel in th4e shutter frames 18x5mm at 0.70kg/m MS flat is welded over the 32x6mm at 1.50 kg/ RM and MS flat on the reat side iof the door sandwitching the CR sheet for rigidity with locking rail and bottom tie arrangements, Additional stiffners with 18x5mm at 0.7 kg/m MS flats are provided hotizontally diagonally on the rear side of the shutter.2 Nos.of hinges in case of single leaf and 4 Nops.Of hinges in case double leaf shutter is provided 6 Nos.of hold fasts 200 le ngth 40 x 40 x 6mm MS angle spliced at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. one at top and the other at bottom are provided. One aldrop is provided incase of double leafves door at lock rail section in the door. For single leaf doors, one more aldrop is provided in the inner side at the lock rail section of the door. One rotating locking arrangements at the inner side of the door and additiojnal provision for locking arrangements for lock is provided with 32x6mm MS flat on the rear side of the door at na appropriate place in case of a double leaves dodor MS flat 32x6mm at 1.50kg /m is provided on the edge of one shutter to conceal the gap between the shutters. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing.etc., complete and as directed by the departmental officers.

Manufacturing, supply and fixing of Steel doors with single leaves with following specification, MS angles of size 40x40x6mm at 3.5 kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60 kg/m for the shutter frames. Stiffners with 32 x6mm at 1.50Kg/m. MS flat is provided as the lo cak rail of the door4 and welded infact of both ends to the shutter frame, 18 gauge CR sheets of best quality is laid as panel in th4e shutter frames 18x5mm at 0.70kg/m MS flat is welded over the 32x6mm at 1.50 kg/ RM and MS flat on the reat side iof the door sandwitching the CR sheet for rigidity with locking rail and bottom tie arrangements, Additional stiffners with 18x5mm at 0.7 kg/m MS flats are provided hotizontally diagonally on the rear side of the shutter.2 Nos.of hinges in case of single leaf and 4 Nops.Of hinges in case double leaf shutter is provided 6 Nos.of hold fasts 200 le ngth 40 x 40 x 6mm MS angle spliced at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. one at top and the other at bottom are provided. One aldrop is provided incase of double leafves door at lock rail section in the door. For single leaf doors, one more aldrop is provided in the inner side at the lock rail section of the door. One rotating locking arrangements at the inner side of the door and additiojnal provision for locking arrangements for lock is provided with 32x6mm MS flat on the rear side of the door at na appropriate place in case of a double leaves dodor MS flat 32x6mm at 1.50kg /m is provided on the edge of one shutter to conceal the gap between the shutters. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing.etc., complete and as directed by the departmental officers.

Providing Anti – termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 part I to IV in stage to suit the progress of work

on works)

Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification.

Supplying and fixing in position Stainless Steel Health Faucet of size 15mm dia inlet and 100mm dia outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers. (The materials should be got approved by the Executive Engineer before use on works).

on works)

20mm Dia UPVC Elbow

20mm Dia UPVC Coupling

20x15mm UPVC Reducer

32 mm dia

Supplying and fixing PVC ventilating shaft of 110mm dia and 3m height of best approved quality and as per standard specification. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position best quality PVC Soil/ waste pipes 6 kg / sqcm of various size (Below Ground Level) having ISI mark and providing leak proof joints, complying with standard specification etc., complete.

Supplying and fixing PVC ventilating shaft of 110mm dia and 3m height of best approved quality and as per standard specification. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position best quality PVC Soil/ waste pipes 6 kg / sqcm of various size (Below Ground Level) having ISI mark and providing leak proof joints, complying with standard specification etc., complete.

75 mm Dia PVC Pipe

Supply and fixing in position best quality PVC Soil/ waste pipes 6 kg / sqcm of various size (Above Ground Level) having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitory fittings, dismantling masontry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete.

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110mm dia Door Elbow

110mm dia Door Tee

110mm dia Elbow

110mm dia Y with Single Door

110mm dia PVC Air Cowl

75mm Dia Elbow

75mm dia PVC Air Cowl

Construction of Inspection chamber of following size with the following description. The earth work excavation to a size of 1.20 x 1.20 x 1.05m, sand filling for 10cm thick, cement concrete 1:5:10 for 15cm thick using 40mm gauge HBGS jelly, walls in brick work in cement mortar 1:3 (One cement three sand) using country bricks of size 9" x 4 3/8" x 2 3/4" plastering with cement mortar 1:3 (One cement three sand) 12mm thick and the bottom is finished with cement concrete 1:3:6 (One cement three sand and six aggregate) using 20mm brick jelly etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and Fixing of PVC ready made water tank of approved quality with standard specification and best brand including testing for leakages after making installations and connections. The cost inclusive of lid and lock with bolt and nuts for PVC tank, transportation, loading, unloading, lifting, installation and necessary connections etc., complete complying with standard specifications and as directed by the departmental officers.(The PVC Water Tank should be got approved by the Executive Engineer before use on works).

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned urface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

Manufacturing supplying and fixing in position of teracotta jally 20x20x5cm thick approved quality and design in cement slurry including cost of materials labour curing lifting fixing in position etc, complete complying with standard specification and as directed by the departmental officers in all floors.

Supplying and laying of Interlocking Paver Block Stone 60mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc., complete complying with standard specification and as directed by the departmental officers in all floors.

Supplying and filling in foundation & basement, etc with filling Course aggregate using 25 mm gauge hard broken granite stone jelly in layers of not more than 15 cm thick etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and Fixing of Ornamental Teak Wood main entrance Door with Two leaves wooden panel with partly Glazed panel and the shutter planks engraved with Oranamental Carving works as per drawing and design approved by the Departmental officer with following specification. The wood works to be polished with two coats of Melamine using best quality and approved colour of varnish for Shutter and frames and BEE'S WAXING using best quality of wax over the varnish for Shutter and framesincluding cleaning the surface. The rate is inclusive of cost of all materials and labour, brushes ,scaffolding charges, supplying the following furniture fitting including cost and labour charges for fixing etc., complete complying with standard specification.(The varnish ,wax and furniture fitting to be used should be got approved by the Executive Engineer before use on work).

Supplying and fixing of PVC corner beeding of best approved quality and colour standard size and thickness of required height of walls using cement mortar 1:2 and finishing the surface smooth with ceramic tiles etc,. All the materials should be got approved by the Executive Engineer before fixing in position and as directed by the departmental officers

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact etc., complete complying with standard specification and as directed by the departmental officers.