S/R such as patch and Pot holes repair and other ancillary minor works from 0/00 km to 30/00 Km of KMT Road SH-5 .

Clearing and grubbing land including uprooting rank vegetation, grass,bushes, shrubs, saplings and tree girth upto 300 mm, removal of stumpsoftrees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000 meters including removal and disposal of top organic Soil notexceeding 150mm in thickness as per clause 201 of MORT&H Spesifications for Road & Bridge works (4th Revision)

Earth work excavation in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge per 100 cum.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam in compacted layers (individual layer does not exceed 100mm) using hard granite crushed aggregate and crushed stone screened dust including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to worksite, laying in uniform layers with paver in subbase or base course on well prepared surface and compacting with smooth wheeled roller as per Clause No. 406 and Section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (4th Revision) &including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Providing and applying prime coat with slow setting bitumen emusion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg/sqm using mechanical means.

Providing and applying tack coat with rapid setting bitumen emulsion using emusion pressure distributor at the rate of 0.20 Kg per sqm on the prepared Bituminous surface cleaned with mechanical broom.

Providing 50mm thick Bituminous Macadam using crushed stone Gr-2 materials & 60 / 70 penetration grade of bitumen as per approved Drawing & Technical Specifications and as per Clause-504 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).

Providing 25mm thick S.D.B.C. using crushed stone Gr.-2 materials & 60 / 70 penetration grade of bitumen as per approved Drawing & Technical Specifications and as per Clause -508 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).