Estimate for Constructing Pump house at IMT Bawal including civil, mechanical,electrical works for disposal of Storm water from HSIIDC Bawal to Sahibi River catchment area.

Supply, Installation, Testing and commissioning of Online Effluent Quality Monitoring System with complete Engineeing Panel, Cloud connector (Devices) for online server connectivity with all electrinics for monitoring parameters including COD, BOD, TSS and pH including online data transfer to HSPCB, CPCB and PHED website on daily basis complete at Project. for online (continuous) measurement of PH, Total suspended solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (Spectral measurement in the UV-VIS range 200-720 mm) performing reagent and chemical free analysis with automatic cleaning of censor, single cables and power cables, local data acquisition and display of data on continuous basis for up linking the date to CPCB, HSPCB and PHED,Irrigation, TUV approved complete in all respects as Central per Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluents and as Contained in scope of work in the notice inviting tender. 1. Multi-Parameler measuring converter, for connecting upto 18 intelligent sensors, scope includes 6 analog outputs (014-20mA), wide-range power supply Optical COD/BOD and TSS probe with spectral processing of the UV-VIsnge, for measurement in the inlet/ effluent/ BNR part of municipal waste water treatment plants at various Locations in Haryana State with integrated with automatic cleaning. 2. Robust digital pH/ORP sensor for pH/ORP electrodes, withbuilt-in pre-amplifier and temperature sensor with Automatic Temperature Compensation (ATC), Cable length 100meter (minimum) 3. Sensor adapter cable for all intelligent sensors, with IP69 water proof connection to the intelligent Sensor Netsystem, Cable length 100 meter (minimum). 4. Data transfer to CPCB, HSPCB and PHED, Irrigation servers complete as per satisfaction of Engineer-in-Charge 5. Providing GSM 4G, 5G modem with mobile network Connectivity including network charges (1 year warranty) complete as per satisfaction of Engineer-in-Charge. No Extra Payment will be made for this job, It included all accesories and parts as required. (GST not included in this Item Rate)

Providing and lowering of 150 mm outer diameter UPVC threaded pipe (pressure rating 10 kg/cm²), duly ISI marked conforming to IS: 4985 for potable water supply applications including all jointing materials, handling, lowering, alignment and fixing, complete in all respects, as per directions of the Engineer-in-Charge.”

Supplying, installing, testing and commissioning of 800 mm sluice valve generally confirm to IS: 14846 and outside screw Rising Spindle of SS: 304, with length over flanges as per PD of IS: 14846 corresponding to BSEN -558/ISO 5752 basic series 3 in DI construction (GGG 40/IS1865 Gr.500/7) having metal seating (IS:318 Gr. LTB2 with 2% Nickel / SS AISI 304) Ø400 and above shall be fitted with ball thrust bearings, enclosed spur gear box, back seat bush as accessories for ease of operation, shall be coated internally and externally with epoxy liquid coating (minimum DFT 200 micron), valves Ø50 and above shall be rated PN1.0/1.6 as per final design of BOQ and flanges faced and drilled as per IS: 1538 table 4 and 6 /IS: 9523/BS EN 1092-2.Operation - including Electric Actuator (AUMA / ROTORK / MARSH / LandT/VTM/ABB with integral starter) complete in all respect as per site requirement and to the satisfaction of Engineer-in-charge, of make IVC Nasik/Kirloskar/KBL/Jupiter or any reputed brand.(Rates excluding GST)

Providing, supplying, installing, testing andcommissioning of 800 mm dia Non-Return Valve (NRV) of brands IVC Nasik/Kirloskar/KBL/Jupiter or any reputed brand, Valve upto 600mm dia. Shall be confirm to IS:5312 part 1 and above to IS:5312 part 2. Valve shall be in graded DI (IS:1865 Gr.500/7) with metal to metal (IS:318 Gr. LTB2 with 2% Nickel / SS AISI 304 stub pin and slants seat design. Valve above 600mm dia must be multi-door design with doors having minimum two integral lugs for hinging of the door. Valves Ø50 and above shall be rated PN1.0/PN1.6 as per final design of BOQ) and flanges faced and drilled as per IS: 1538 table 4 and 6 IS: 9523/BS EN 1092-2 complete in all respect as per site requirement and to the satisfaction of Engineer-in-charge (Rates exclusive GST)

Providing, supplying, installing, testing andcommissioning of 400 mm dia Non-Return Valve (NRV) of brands IVC Nasik/Kirloskar/KBL/Jupiter or any reputed brand, Valve upto 600mm dia. Shall be confirm to IS:5312 part 1 and above to IS:5312 part 2. Valve shall be in graded DI (IS:1865 Gr.500/7) with metal to metal (IS:318 Gr. LTB2 with 2% Nickel / SS AISI 304 stub pin and slants seat design. Valve above 600mm dia must be multi-door design with doors having minimum two integral lugs for hinging of the door. Valves Ø50 and above shall be rated PN1.0/PN1.6 as per final design of BOQ) and flanges faced and drilled as per IS: 1538 table 4 and 6 IS: 9523/BS EN 1092-2 complete in all respect as per site requirement and to the satisfaction of Engineer-in-charge (Rates excluding GST)

Providing, fixing, and commissioning of Cast Iron (CI) Sluice Gate 1000 x 1000 ,with Frame conforming to IS: 13349 (latest revision),with actuator, with S.S. 304 Grade Spindle and Seating Faces, D.I. Wedge Block with S.S. AISI :304 / CF8 Lining with all accessories including Lift Nut, Fastners, Extension Spindle, Guide Bracket, Coupling, Coupling, Electric Actuator (IP68, Integral Starter) Accessories (Companion Flanges, SSetc all complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rates excluding GST)

Design, manufacture, supply, installation, testing and commissioning of 160 HP VFD Starter Panel, Star Delta By-pass type suitable for non-clog submersible pumps, Indoor PTTA type, suitable for operation on 415 volts, 3 phase, 50 Hz A? supply system, fabricated out of 14/16 SWG CRCA sheet steel enclosure of suitable thickness, floor mounted, free standing, dust and vermin proof, single front compartmentalized construction, complete with seven tank anti-corrosive chemical treatment process including degreasing, rinsing, derusting, phosphating and passivation followed by powder coated finish in Siemens grey shade. The panel shall be manufactured by reputed and approved makes such as Siemens, Schneider Electric, ABB, LandT, Crompton Greaves, Legrand, Danfoss or any other reputed equivalent brand approved by the Engineer-in-Charge. The panel shall be complete with 320A TPN electrolytic grade aluminium bus bars insulated with heat shrinkable PVC sleeves along with sultable supports, finger supports, insulators, hardware, nut bolts, spring washers and all associated accessories. The panel shall comprlse 320A, 36kA TP MCCB incomer with overload and short circuit protection complete with spreader set and extended rotary handle, The panel shall be provided with 140A TP star contactor, 250A TP delta/main contactors, 250A TP by-pass contactors, auxiliary contactor, 160 HP heavy duty VFD, line choke, PLA relay, selector switches, start/stop push buttons, ON/OFF/TRIP indicating lamps, multiturn potentiometer for VFD control, digital ammeter with selector switch arrangement, esin cast CTs, CT shorting links, terminals and neutral link complete in all respects, The panel shall Include complete internal metering, control and power wiring using copper control wires wIth ferrules, thlmbles, aluminium lugs, PVC cable ducts, cable ties, casing- capping, C channels, D channels and all necessary accessorles required for satisfactory and trouble-free operation. The enclosure shall be complete with neoprene gasket, panel locks, lifting hooks, nut bolts and all other mounting hardware. The panel shall be fully wired, factory assembled, tested and ready for installation. Routine tests such as visual inspection, dimensional checks, functional checks and HV/Megger tests shall be carried out as per relevant IS standards. The complete work shall be executed strictly In accordance with approved technical specifications, bill of materials and manufacturer`s offer and to the entire satisfactlon of the EngIneer-In-Charge ( Rates excluding GST)

Fabrication of M.S. pipes and specials as per IS specifications with inside and outside epoxy coating as per IS 3589 code or any other relevant IS codes , duly tested for usage in Drinking water inclusive of all materials, inspection charges, transit insurance, loading/unloading, FOR site, and stacking etc. complete as for direction of Engineer-in-Charge(Rates excluding GST)