Replacement Supply, Erection and Commissioning of various electromechanical equipments (Motors, Pumps, LTDB, Starters and cable etc) of Pump House ND-1 to 2, DM-1 to DM-3, HD-1 to 6 , DNM 1 to 2 SBD-1 to SBD-5, ALM-1, DSPM-1 and KHM-1 WS Div NNL

Amount

Replacement of 35 Cs. existing V.T. axial flow pump of lift height 23.02' including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH ND-2=1

Replacement of 35 Cs existing V.T. axial flow pump of lift height 23.02" including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH ND-1=2, HD-1=2.

Replacement of 10 Cs. existing V.T. axial flow pump of lift height 21.02' including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH SBD-3=1

Replacement of 09 Cs existing V.T. axial flow pump of lift height 17.02' including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH SBD-4=1

Replacement of 7.5 Cs existing V.T. axial flow pump of lift height 15.02' including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH SBD-5=1

New Supply, Erection and Commissioning of 05 Cs existing V.T. axial flow pump of lift height 29.02" including MS Delivery pipe, with all flanges, Bearing housing, Gland housing, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH DNM-2=2.

Replacement of 05 Cs existing V.T. axial flow pump of lift height 23.02" (HD-4 & HD-5), 19.01" (HD-6) & 29.02" (DNM-1) including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH HD-4=2, HD-5=1, HD-6=1 DNM-1=1.

Replacement of 04 Cs existing V.T. axial flow pump including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH KNM-1=2 (lift height 21.12'), DSPM-1=2 (lift height 19.34')

Supply, Erection and Commissioning of 02 Cs existing V.T. axial flow pump of lift height 23.03' including MS Delivery pipe, with all flanges, Y-Body, bend, syphon breaker valve & support of bend with any leftover item duly painted inner and outer side as per site requirement & specification approved by technical committee (Annexure-A) at PH ALM-1=1.

Supply, Erection and Commissioning of Solid shaft motor of capacity 170 HP , 980 RPM, 3 phase, 440/415 Volt suitable for 35 Cs. V.T. axial flow pump type vertical flange mounted as per specification approved by technical committee at pump house ND-1=4, HD-1=2

Supply, Erection and Commissioning of Solid shaft motor of capacity 170 HP , 980 RPM, 3 phase, 440/415 Volt suitable for 35 Cs. V.T. axial flow pump type vertical flange mounted as per specification approved by technical committee at pump house ND-2=3.

Supply, Erection and Commissioning of Solid shaft induction motor of capacity 100 HP , 980 RPM, 3 phase, 440/415 Volt suitable for 20 Cs. V.T. axial flow pump type vertical flange mounted as per specification approved by technical committee at pump house DM-1=1, HD-2=1, HD-3=1.

Supply, Erection and Commissioning of Solid shaft induction motor of capacity 50 HP(in Place of Hollow Shaft), 1450 RPM, 3 phase, 440/415 Volt suitable for 7.5 Cs. V.T. axial flow pump type vertical flange mounted as per site and specification approved by technical committee at pump house SBD-5=1.

Supply, Erection and Commissioning of induction motor of capacity 40 HP (Solid Shaft), 1440 RPM, 3 phase, 440/415 Volt suitable for 05 Cs. V.T. axial flow pump type vertical flange mounted as per specification approved by technical committee at pump house HD-4=2 HD-5=1 HD-6=1, DNM-1=1, DNM-2=2.

Supply, Erection and Commissioning of Solid Shaft induction motor of capacity 40 HP (in Place of Hollow Shaft), 1440 RPM, 3 phase, 440/415 Volt suitable for 05 Cs. V.T. axial flow pump type vertical flange mounted as per specification approved by technical committee at pump house HD-1=1 HD-2=2 HD-3=2 DM-3=2 ND-1(Barkoda Minor) =1

Supply, Erection and Commissioning of induction motor of capacity 40 HP (Solid Shaft), 1440 RPM, 3 phase, 440/415 Volt suitable for 04 Cs. V.T. axial flow pump type vertical flange mounted as per specification approved by technical committee at pump house KNM-1=2.

Supply erection and Commissioning of fully automatic ATS starter suitable for 60 HP motor with suitable contactor for main transformer/ start, interliking bush bar of suitable size complete in all respect with degree of protection IP 54 complete with small item like air cooled ATS, thimble, nut bolt , lugs etc with the stand of MS angle (50x50x6 mm) of 1 feet height from floor level with allied accessories along with Supply erection and Commissioning of capacitor bank 12 KVAR to connect for each starter panel as per site requirement and as per approved technical specifications as per approved make at pump house SBD-5=1

Supply erection and Commissioning of fully automatic ATS starter suitable for 50 HP motor with suitable contactor for main transformer/ start, interliking bush bar of suitable size complete in all respect with degree of protection IP 54 complete with small item like air cooled ATS, thimble, nut bolt , lugs etc with the stand of MS angle (50x50x6 mm) of 1 feet height from floor level with allied accessories along with Supply erection and Commissioning of capacitor bank 10 KVAR to connect for each starter panel as per site requirement and as per approved technical specifications as per approved make at pump house SBD-5=1

Supply erection and Commissioning of fully automatic ATS starter suitable for 40 HP motor with suitable contactor for main transformer/ start, interliking bush bar of suitable size complete in all respect with degree of protection IP 54 complete with small item like air cooled ATS, thimble, nut bolt , lugs etc with the stand of MS angle (50x50x6 mm) of 1 feet height from floor level with allied accessories as per approved make and specification by irrigation and WR department Haryana at pump house DNM-1=1, HD-4=1, HD-5=1, HD-6=1, DNM-2=2

Supply erection and Commissioning of fully automatic ATS starter suitable for 40 HP motor with suitable contactor for main transformer/ start, interliking bush bar of suitable size complete in all respect with degree of protection IP 54 complete with small item like air cooled ATS, thimble, nut bolt , lugs etc with the stand of MS angle (50x50x6 mm) of 1 feet height from floor level with allied accessories along with Supply erection and Commissioning of capacitor bank 08 KVAR to connect for each starter panel as per site requirement and as per approved technical specifications as per approved make at pump house KNM-1=2 SBD-4=5

Supply erection and Commissioning of LTDB panel of 250 Amp. capacity with degree of protection IP54, with all accessories as 01 incomer MCCB 250 Amp., 03 No. outgoing MCCB 100 Amp. for 40 HP starters along with an aditional MCB of 63 Amp. for lighting loads with indicators, relays, digital meters, push buttons, bush bar etc of suitable size with a stand of MS channel (1 feet up from floor level). The LTDB panel should be as per site requirement and as per technical specification approved by I&WRD Haryana. at pump house KNM-1=1.

Replacement with supply, erection and Commissioning of auto-transformer for 50 HP in existing starter panel (ATS type) oil cooled/ immersed with different taps provided to start the motor at say, 50% 65% or 80% of line voltage of 415 Volts as per site requirement (annexure C) PH SBD-1

Supply laying and installation of LT 1100 Volts cable PVC XLPE armoured Aluminium conductor of sizes as mentioned as per relevant IS specification and approved make as per annexure C in technical specification of Haryana Irrigation Deptt.various sizes as below : a) single core 630 sq mm (50 mtr at DM-3)

b) 3.0 core 300 sq mm

c) 3.5 core 120 sq mm

d) 3.0 core 50 sq mm

e) 3.5 core 300 sqmm (DM-3)

f) 3.5 core 35 sqmm (DNM-1=10 mtr DNM-2=30 mtr HD-4=10 mtr HD-5=10 mtr HD-6=10 mtr)

Providing 30 feet deep complete double side plate earthing with 2 earth pits on both sides of pump house by boring & lowering 1.5" GI pipe, filling boring with charcoal, copper strips, salt & fixing base plate, comecting this main earthing through copper strips/ wires up to motors & panel as per site requirement. (ND-2, SBD-1 to SBD-5 ALM-1 DSPM-1 KNM-1,ND-1, DM-1 to 3, HD=1 to 6, DNM-1 to 2)

Supply erection and commisioning of MS component duly dual painting as:- A) Outer jaal made of 40x40x5 MS angle and 32x5 MS flat B) Internal jaal made of 40x40x5 mm MS angle and 32x5 MS flat C) Trash rack made up of 100x50x5 mm channel and 50x8 mm flat at 80 mm spacing D) Open rack made up of 40x40x5 angle and 32x5 flat E) Safety grills made of 40x40x5 mm angle and 32x5 mm flat with 150 mm spacing as per approved make : Jindal/Sail/Tata Structural Steel work for repair/making/fixing/dismantling of trash rack, grating/ safety jaal, Wiremesh near pumps and making of M.S. Almirah with duly painted, along with any civil work in PH building at pump house at 1. Pump House ND-2 :- 3180 Kg. 2. Pump House SBD-1 :- 1643 Kg. 3. Pump House SBD-2 :- 1375 Sq. Mtr. 4. Pump House SBD-3 :- 1482 Sq. Mtr. 5. Pump House SBD-4 :- 1107 Sq. Mtr. 6. Pump House SBD-5 :- 1107 Sq. Mtr. 7. Pump House ALM-1 :- 307 Sq. Mtr. 8. Pump House DSPM :- 302 Sq. Mtr.

Supply erection and commisioning of MS component duly dual painting as:- A) Outer jaal made of 40x40x5 MS angle and 32x5 MS flat B) Internal jaal made of 40x40x5 mm MS angle and 32x5 MS flat C) Trash rack made up of 100x50x5 mm channel and 50x8 mm flat at 80 mm spacing D) Open rack made up of 40x40x5 angle and 32x5 flat E) Safety grills made of 40x40x5 mm angle and 32x5 mm flat with 150 mm spacing as per approved make : Jindal/Sail/Tata Structural Steel work for repair/making/fixing/dismantling of trash rack, grating/ safety jaal, Wiremesh near pumps and making of M.S. Almirah with duly painted, along with any civil work in PH building at pump house at 1. Pump House HD-1 :-2480.71 Kg. 2. Pump House HD-2 :- 962.96 Kg. 3. Pump House HD-3 :- 1939.6 Sq. Mtr. 4. Pump House HD-4 :- 1785.104 Sq. Mtr. 5. Pump House HD-5 :- 888.116 Sq. Mtr. 6. Pump House HD-6 :- 491.144 Sq. Mtr. 7. Pump House DNM-1 :- 1488.84 Sq. Mtr. 8. Pump House DNM-2 :- 1489.564 Sq. Mtr.

Providing and Fixing of Wire mesh Frame on Windows at various Pump houses with 40x5mm MS Flat and 10 Gauge Wire mesh with gap 25mmx25mm duly painted along with any civil work including all fabrication work at 1. Pump House HD-1 :- 36.08 Sq. Mtr. 2. Pump House HD-2 :- 19.00 Sq. Mtr. 3. Pump House HD-3 :- 23.70 Sq. Mtr. 4. Pump House HD-4 :- 25.19 Sq. Mtr. 5. Pump House HD-5 :- 4.68 Sq. Mtr. 6. Pump House HD-6 :- 7.02 Sq. Mtr. 7. Pump House DNM-1 :- 0 Sq. Mtr. 8. Pump House DNM-2 :- 4.68 Sq. Mtr. 9. Pump House ND-2 :- 15 Sq. Mtr.

Providing and fixing of set of pair M.S. Cross Girder (ISMB 300) & M.S flat of suitable section for foundation of size=300x140mm for 02 Cs., 05 Cs., 20 Cs. VT Pump with all works as welding, painting, pcc block (including complete civil work), A.I. Brackets, M.S Plate etc complete as per site including dismentaling/taking down of old M.S Cross Girder structure as per site HD-2, HD-3, DNM-1, DNM-2 HD-4

ace marketing pvt ltd

Avon Engineering Company